My apple tv says no signal on tv.i check all the connections but still says no signal
apple tv not connecting to tv...i tried all the possible solutions but still tv says no signal
sounds like the tv can't handle the resolution the appletv use default
I would connect the appletv to another tv and lower the resolution and test with the org tv again to see if it can handle the lower res
Similar Messages
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
i was using my nano as usual 2day, and then i notices the screen wasn't doing anything, so i reset it and all i get is the apple, it still plays music, and syncs with itunes, and u can get into the diagnostics on it, and they display properly, and it passes all the tests... just the display not showing when it loads up..? help!!
Tried restoring it, still the same. loaded all songs back onto it, and it plays them... still just an apple on the screen! apple still there when the ipod is supposed to be off, and then it wont come back on unless u reset it again.
-
Dear users,
I bought recently the app "Amplitube Slash" for my iPod touch, through the app store and I paid 8€ for it.
When I tried to play guitar using the application with "Amplitube iRig", I could not listen anything as the input says "none". I would like to know how or if anyone knows how to solve this problem.. You can ask anything if you need more details.
Best regards
DuarteHere is their support site.
http://www.ikmultimedia.com/c
Here is Apple's support article:
iOS: Troubleshooting applications purchased from the App Storetact-support/ -
Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?
You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)
-
Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273. -
i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?
edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.
-
I use itunes on my laptop to work with my ipad I can sync no problem but when I try to get to the store it doesn't connect and says check my internet connection but there is nothing wrong there that I can see
If anyone has had a similar problem and resolved it I would love to know how
thanksCan't connect to the iTunes Store
http://support.apple.com/kb/TS1368 -
I know my network connection is fine and I've checked all the cable connections and my television is set to the correct input, but even though the remote beeps when I hit the button, I see nothing on the screen. The troubleshooting section in the setup guide says to make sure that Apple Tv is connected to my network by choosing Settings>General>Network. How do I do this? What do I need to do to get everything back? I've been using the Apple tv for a while now, and suddenly it's doing this.
This is the iPod touch forum. I requested your posted be moved to the Apple TV forum
Using Apple TV -
okay so i used my itunes card in the us store but when i enter the app store and download an app,it says "your apple id idn't valid in the saudi arabian store you have to switch to the us" & i did i switched to the us but still it says the same thing? any other solution,help?
OS X has a new way to get drivers. Manufacturers give the latest to Apple, who keep them on their servers for automatic download/install.
You should always try deleting and re-adding in Print & Scan prefs first. If it doesn't work, then reset the printing system:
http://support.apple.com/kb/PH14141
You can check the version number of current (auto-download) drivers here:
http://support.apple.com/kb/ht3669#HP -
My 4 generation ipod touch is syncing from itunes, and every time it syncs it has to sync all the songs but on the ipod it says no content? What to do?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod. -
How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?
Are you using a supported carrier? Do you have a plan that permits text messaging?
The iPhone uses a 'silent' SMS message exchange with Apple's servers in the UK to activate. If you are not using a supported carrier, and/or your account is not provisioned properly for an iPhone, the activation may not be able to complete. -
I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?
AS Tesserax said you must
disconnect your laptop from the existing wifi network
Connect to the default Apple Networkxxxxxxxxx - that is your AEX open network
Go to the Airport Utility and set the AEX router to extend the Existing Network >> in the AirPort Tab > Wireless Tab >> Wireless Mode - choose your Linksys network and enter credentials - your AEX should now join the Linksys network
Then switch back to your original wifi network and your AEX should show in the AirPort utility as well, extending the range of your Linksys network, green light on
PS: Win XP support for WP2 authentication downright *****. Even with SP3, get ready for some "cannot connect" warnings. My Dell laptop from work would have major issues connecting to my home's AirPort WPA2. I had to downgrade to WPA at some point. -
I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.
Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account. -
Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID. I have tried to do this going through the manage accoung like, but it timed out - could somebody help, pls
Purchases of multple Apple ID accounts cannot be merged as noted here > Frequently asked questions about Apple ID
Maybe you are looking for
-
Error while installing shared technologies
I just purchased Photoshop 11 from download services at Amazon. In the middle of installation, I get error "error while installing shared technologies. Please restart your system and try again" in Windows 7 professional, 64 bit. I tried this. 1. rest
-
Photos now too dark/contrasty
After the update all my images are now way too dark! My screen is calibrated. Any ideas? Thanx for any help in advance.
-
Unable to register service Error while deployment
Hi All, I am getting the following error while deploying. I have attached the log details and the WSDL. Please suggest how to resolve this error. 2010-07-26T17:11:37.828+10:00] [soa_server1] [NOTIFICATION] [SOA-21046] [oracle.integration.platform.blo
-
What�re the different types of reference?
Hello there: I was asked a question during the interview: What�re the different types of reference? They meant sth like weak reference... anyone can give a more detailed explaination? Also someone can talk a little bit about the memory leak in Java?
-
We are facing a issue in our OAM environment and would like to know if there are any suggestions. Our setup is OAM – OVD – OID. Here is the issue: Only Admins are able to successfully login to Identity Server User Manager. A regular user is able to l