My Apple TV was updated and now says I need what looks likes n apple white cord and will not work without it what doi. Do?
I updated my Apple TV now it is asking me to use what looks like an apple cord with my hdmi cord what does this mean?
The update didn't apply correctly. It's telling you to connect to iTunes via micro usb cable and restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
Similar Messages
-
my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??
Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it. -
App Store has not updated for over 24 hours now, it was updating as usual early AM Nov. 6th, I have changed nothing, App Store will not let update or purchase happen now. Anyone know why? Thank you.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone. This phone is not even 6 months old been in case no scratches. This is driving me crazy.
Connect your phone to a computer and restore your software using iTunes.
-
My numbers application will not continue an update and will not open due to said incomplete update
My numbers application will not continue an update and will not open due to said incomplete update
open the application "LaunchPad" then locate Numbers. Click and hold on Numbers until is starts to shake. click the "X" in the top left corner. click on the desktop to exit this mode. Now open the App store and install again.
-
IPhone 5
I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app - tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I tried importing email addresses from gmail and now my address book is locked up and will not work. Do I need to delete my address book software and reinstall? If so, what is the proper way to do this? New to Macbook software. I have tried several things and nothing has helped. I have backed up photos, movies, etc. My addresses are on my iphone so I can sync them later right if I loose my data?
Thanks for your time and expertise,
T.You can probably resolve this by removing some Address Book preference files rather than deleting your Address Book application.
First turn off Synchronize in Address Book Preferences if you can.
Next restart Address Book and try to export everything to your Desktop.
I have had a play and found my Address Book preference files. In the following ~/Library is the Library within your Home folder. Any numerals may differ on your Mac. Quit Address Book before doing anything with these.
1 - Display details and things set in Address Book Preferences
~/Library/Preferences/com.apple.AddressBook.plist
2 - Has no data - not sure what this does
~/Library/Preferences/com.apple.AddressBook.abd.plist
3 - Has last sync date - may have more if I used sync
~/Library/Preferences/ByHost/com.apple.AddressBook.sync.000393735c06.plist
4 - My contact details
/Library/Preferences/AddressBookMe.plist
5 - Individual addresses and groups stored as separate files within:
~/Library/Application Support/AddressBook/Metadata
6 - All of these addresses are are also in this single database:
~/Library/Application Support/AddressBook/AddressBook-v22.abcddb
If you wish to remove all addresses drag both 5 & 6 to your Desktop.
If you wish to reset preferences drag 1 your Desktop.
Removing 3 may resolve sync issues but I am unable to test this.
If you wish to reset everything drag all except 4 to your desktop.
Apple has an interesting page at: http://support.apple.com/kb/TS2481
I hope this helps. -
Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?
have you tried to install flash
restart imac
go to web site which require flash -
Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Ipod classic will not restore and will not work after many attempts
I have purchased and replaced 3 ipod models, This is my third one (80GB ipod classic) and with out fail after 1 year and 2 months after buying it, it stopped syncing with my itunes and now after 5 attempts to restore it will not restore and will not work. I am sick of this and find it preposterous. What is wrong with ipods..? what is wrong with my recent one?
I have tried to restore via itunes and I still get the same message on the Ipod after many many restore attempts."Use iTunes to restore" with the picture of a plug on the screen and then it just shuts down. Exactly 1 year and 2 months after I purchased it as was the previous Ipod I had in 07.... what is going on?
Are ipods not made to work with both macs and pc's? it seems they just shut down after a while
what can I do? -
My ipod touch go of and will not work untill i plug it back in to a ac power
my ipod touch go of and will not work untill i plug it back in to a ac power
You likely have a hardware problem like a dead battery. To rule out a software problem try the following in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod
If still problem make an appointment at the Genius Bar of an Apple store. -
My home button is stuck and will not work any ideas?
My Ipod home button is stuck and will not work, any suggestions??
See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
If you have iOS 5 you can go to Settings>General>Accessibility and turn on Assistive Touch. It adds software buttons to the screen. -
I have just updated the software on my Apple TV since then home sharing will not work though I had not used it since installing iOS6 on my iPad 3. Home sharing is shown to be on on the Apple TV and on on my iMac. The Apple TV is connected to the router with an ethernet cable and all functions work correctly apart from my computer.
I have done the following.
Switched off the Apple TV and rebooted, did the same with iMac
Turned off home sharing then turned it on.
Checked that home sharing is on on both devices.
Selected Computer
Get a message telling me to turn home sharing on - IT IS!
Tried using airplay mirroring on the iPad but the airplay function is missing from iPad.
It is so annoying since before iOS6 and updating the Apple TV software everything worked perfectly. Any help would be very gratefully received.
ThanksHi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore
Maybe you are looking for
-
Softphone feature for Cisco Jabber Client
Hello everyone, I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features suc
-
NOT ABLE TO DISPLAY THE NEW ADDED FIELD
Hi Experts, I was working on Solution Manager. Iam Creating table maintianance generator for particular table. Its working fine when i done the job for the first time. As i forgotten to add one more field in that table i had done it later. now tha
-
DEMO create or replace package Demo AS TYPE Empnotype is TABLE OF EMP%ROwTYPE; PROCEDURE Ename_Display(Pempno_Array IN Demo.Empnotype); END;DEMO BODY CREATE OR REPLACE PACKAGE BODY Demo AS PROCEDURE Ename_Display(Pempno_Array IN Demo.Empnotype)IS v_t
-
I'm modifying an existing fla file that has an audio file that plays in a loop for ever. I replaced that file by importing a new mp3 file but my audio only lasts 30 seconds or so although it is a 2 min audio file. Can someone tell me how to extend th
-
Essbase services from remote machine
Hi, Can anyone suggest if we can start all the essbase services(like foundation services, essbase server, etc) from a remote machine or client machine? Please advice. Can we write a script or is there any other option available? Thanks in advance.