My apps on he iPad will not open suddenly. It seems to be all apps and powering off and on does not fix the problem
The apps on my iPad are nt working. What do I do?
If it truly is ALL apps (including the preinstalled apps) that will not open, try a reset and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If only the third party apps will not work, then Meg's advice should work.
Similar Messages
-
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
My iPad will not join the iCal at my work after I've been invited. It says it needs more information. What up?
A reset should help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
-
My ipad will not repond - the icloud backup notification is on the screen. I can not remove it by clicking on OK I can not get the slide to unlock or slide to lock to work either.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
-
I ask because every time I did call they could not fix the problem, as in I could not send mail, I was told it was my Internet, then they tell me it is my computer. After spending many many hours on the phone with Apple, I was told I had to reload my hard drive. Which by the way takes a lot more then a few hours. The next day I found I still had the same problem. I could not send mail... I found the problem my self// I didn't have a mail box set up to send mail. How sample that was. Then the next time if I wanted to empty trash I had to turn off the computer then reset to do so. When I called tech support she tells me that is normal and they had to do the same thing every time. Well she is wrong in that if you use "empty securely" and not the one that just says empty trash then you do not have to reset or turn off your computer.... So I ask what am I paying $245.00 for? I am sure I will need support at some time, and at least it does give me someone to talk to.
starwalls wrote:
I thank you all for all the replies..
I will be buying the service plan if only for the hardware... I really can not say much about the other support, other then every time I get a female support tech she seems to not know what she is talking about and says that is the way it works... I just keep calling back until I get someone that will know a little to help fix the problem. And yes I hate to say is most likely a male tech.
I do agree apple is NOT what they started out to be... How sad!!! MADE in CHINA very SAD. And here I thought I was buying USA.......
FYI - there has not been a name brand consumer personal computer actually manufactered in the USA in years. Lenovo, Dell, HP, Acer, Apple, Samsung,... - you name it they are ALL made in China or Tiawan. Often many of those brands are being assembled by the same Chinese company in the exact same factory, pulling parts (hard drives, displays, RAM, etc) from the exact same bins. Foxconn for example, which makes iPhones and iPads for Apple, also makes dozens of other makes and models of tablets, ereaders and smart phones for other companies. Like it or not, but the consumer electronic manufactering center of the world is China.
The only consumer computers actually made in the USA these days are by local custom build companies, and it has actually been that way for many years now (I think twinhead may have been one of the last with a plant in the USA - they are still around, now GammaTech, and they still do their "final assembly" in the USA but most of thier manufacturing is done in Tiawan and Malaysia).
By and large, the USA has been out of the actual consumer electronics manufacturing/assembly business for a decade or so now. -
When I connect my iPhone to my PC it is not recognised and iTunes does not open. When I connect my iPod to the same PC everything works perfectly. I conclude that the problem is not on the PC or with iTunes. Switching off and rebooting the iPhone and the PC does not fix the problem. Any suggestions??
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
I recently upgraded Firefox and now I cannot use it if I want to watch something involving Adobe Flash because it crashes. I read your article and made sure I am up to date on all programs through Firefox check page. I reset the timeout on the adobe flash to -1 per your article. Your article states it may crash and just re-load it. I have done all your advice and it still will not run. I am now using Windows as my default browser because I don't have time right now to research this on my own and solve it. I don't know if you are aware that the fixes you suggested are not fixing the problem.
Try reinstalling the previous version of Flash - 10.1 r 102 and get rid of that 10.2 r152 version. ''I never updated Flash and I haven't had a problem with Firefox 4.0 on WinXP.''
http://www.oldapps.com/flash_player.php?old_flash_player=19 <br />
scroll down to <br />
Download Flash Player 10.1 (Non-IE Browsers)
or from Adobe <br />
http://kb2.adobe.com/cps/142/tn_14266.html -
PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?
rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR -
After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?
Click here and follow the instructions.
(99061) -
Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?
Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
I cannot download and use Itunes successfully. Message MSVCR80.dll is missing. Reinstalling does not fix the problem. I also get a error 7, Windows error 126.
How can I fix this?Solving MSVCR80 issue and Windows iTunes install issues.
-
I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.
Thanks for your no help line.
-
Why do my apps in Launchpad keep rearranging themselves and how do I fix the problem?
I have a variety of apps in Launchpad and I have them arranged just how I like them but then I shut down my MacBook Pro at the end of the day and the next day my apps are in completely different locations. It is really quite annoying to have to rearrange them manually after I boot up my Mac. Does anyone know why this happens and how I can fix the problem? Thanks
On-going problem for most of us using Launchpad. Purchased this app that has helped deal with this http://launchpadcleaner.com/. It provides the ability to quickly restore your layout once you had it set up.
-
My ipad will not update apps or let me buy new apps from the app store it says I must be in the Australian store not the USA store, how do I change stores?
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311 -
My new air 2 iPad will not rotate the screen from vertical to horizontal
MMy new iPad Air 2 will not rotate the screen from vertical to horizontal. Is there a screen lock
There is a screen lock. If the Rotation Lock is on you will see a circular arrow surrounding a small lock at the top of your screen near the battery level indicator. To turn on or off the Rotation Lock swipe up from the very bottom of the screen to being up the Control Center. Look for that same icon and tap it.
-
QT 7.4.5 did **not** fix the problem with some .mp4s
It has been 3 versions now - 7.4, 7.4.1, 7.4.5 - since Apple broke the ability of QuickTime Player to play some .mp4 files. Apple says it is because they have some kind of malformed headers, yet they play fine in iTunes. So why can't QT Player play them, and some people report they have problems when put into Keynote?
Apple has broken functionality for lots of users. Time and again this bug has been brought to their attention. It apparently is a design decision not to fix this, and it is a big disappointment.The story so far:
If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with videos from democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
A further problem was the fact that the developers of iSquint conceded that in many cases, the files do not play because they have been created in a non-standard way (the tool used to create them was broken). They have therefore included a Debreaker as a part of the latest version of iSquint. If your files are of this type, then you can run them through this app without having to downgrade QuickTime. This could save you a lot of hassle!
http://www.isquint.org/getit.php
However, in other cases, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.
The recent (mostly security) update to Quicktime 7.4.5 has not changed the situation as described.
Maybe you are looking for
-
How to make a clipping mask in this particular case?
Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner. http://vector.tutsplus.com/tutorials/illustration/how-to-c
-
Adobe reader will not launch on my MAC OS X 10.6.8 without paying subscription
Wife uses my computer for her school classes using Abobe products i.e. deramweaver, CS6 etc.. Her classes ended subscription ended and now when I launch any .PDF file Adobe shows her login, I then change to my login but are still prompted to pay mon
-
I have a wireless keyboard for my ipad and it says to charge it connect it to my pc. can i charge it by connecting it to my ipad?
-
Newbie questions - How do I log in & what's the repository
1) After I install Oracle 9i lite, and start Sql*plus I'm stuck - becuase I have no idea what to use for the UserID/Password, etc., and can find NOTHING in the HTML doc/release notes to get me over this most basic requirement. 2) What's the repositor
-
Exchange 2010 SEP (Symantec Endpoint Protection) Exclusions
Hello, Due to recent events in our organization I've been informed to install SEP on my Exchange Servers. However, before proceeding I've been gathering a list of recommended AV exclusions from one of Microsoft's KT articles. Please see below. https: