My audio levels barely increase at all when adjusting in the timeline

Hello.
I am new to Premiere Pro (from FCP).
When I attmept to increase the audio levels using the yellow handles which live on the actual audio track in the timeline, they only increase by a very small amount when dragging "up". If I drag down, I can decrease them to zero (-60db), but I cannot increase them much higher than 12.
I have some tracks which desperately need to be louder. I tried increasing them using "Amplify" in Audition, but that disrupts the audio so that it sounds garbled and "underwater" sounding.
I'm hoping there's a fix for this.
Thanks.
http://i.imgur.com/mCWMscB.png

I can understand how different sources (different mics or tracks, for example) can result in phase cancellation.
That would not create phase cancellation.
..unless you are saying that when a clip is placed in the timeline its position is not really precise.
I am not saying that at all.
Notice I used the words "...could potentially..." in post #3.
Why tempt fate by using a cumbersome method of increasing
a clip's Gain by duplicating a track when the potential implications
are not fully understood?

Similar Messages

Photoshop CC video: Where is the audio flyout menu? I want to set the audio level of a clip but when I click the little triangle the flyout only offers Motion options, no audio.

I created a video clip by ripping from a (non-protected) DVD & brought it into Photoshop CC for editing. I want the audio to fade in & out but cannot find any audio controls!
The info I've found online says to click the little triangle at the right end of the clip & I should get the audio flyout menu, but all I get is a menu with "Motion" options.
Please help!! Where are the audio options I see on the tutorials?
Thanks ...

The audio was indeed in there; I could hear it! But I found the fix:
Some Googling revealed that the timeline video sprites should appear *blue*, not purple as in my screenshot. I'm not sure how that happened, but I scrapped the project & restarted from scratch - and though I can't say what I did differently, this time the video sprite in the timeline was blue, and the audio flyout was there! So it's all good, thanks!

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

I have created a movie of vacation pictures on my windows movie maker (vista op system). When I open the timeline, select audio, and drag a tune from i-tunes, windows movie maker shuts down and no song is transferred. Are these systems incompatible

I have created a movie of vacation pictures on my windows movie maker. ( Windows vista) When I open the timeline, click on audio, and drag a song from itunes, windows movie maker shuts down, and the song is not transferred. Are these systems incompatible? Can I upload the movie to I tunes somehow and then add the music tracks? Thank you...

You may need to convert the file to mp3
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/HT1550
Correction, I was able to add m4a files to Windows Live movie maker in windows 7, but not sure about your version
Message was edited by: polydorus

View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

It's likely this is an amateur question buuut -
Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

SEQUENCE--> SHOW AUDIO WAVEFORMS

Audio is out of sync when placed in the timeline!!!

When I play a clip in the viewer, everything is fine, but when the clip is placed into the timeline and played in the canvas, the audio is out of sync by about half a second. I noticed that even when I view the sound waves, what I hear does not match up with where the playhead is. This is extremely frustrating and I have currently resulted to physically moving the audio to match it up, something that I do not want to do for the duration of my film.
I read in another post that the video and the audio could not be at the same level. How can you tell if the video and audio are at the same level??
I have FCE 3.5 if that makes any difference. Any help would be much appreciated!

How was this clip imported? If it was captured/ingested, did you make sure that the sample rate of the capture settings matched the sample rate of your audio? Normally FCE will give you a warning if they don't match, but it can't hurt to make sure.

I delete all when sign off, The performance of the connon is slow to load trustes sites how can all cookies be save fro some sites but all other sites be deleated?

Firefox is slower than internet explore 8. I delete all when I close FireFox. I think I want to do is clear all cookies except some sites. Example USAIR is a trusted site it takes a long time to load. If I go into internet explorer clean out temporary internet file Internet explorer take time to load. How do you clean out everything except some select sites?

I am not sure what you ask is possible.
There is a default smart search for 'Most Visited' but I would think if you delete your 'History' you will not have History entries showing up in the location bar.
You can keep your History but prevent it displaying in the dropdown list of the location bar, but that is the opposite of what you are asking about.

Premiere Pro Timeline with 3 video channels and 4 audio channels, audio channels change to 8 channels when clip dragged onto timeline.

Premiere Pro Timeline with 3 video channels and 4 audio channels, when clip dragged onto timeline audio channels change to 8 channels. Audio track mixer changes too. I edit undo to remove dragged clip and it reverts back to 4 channels of audio on timeline as does the audio mixer? Any ideas as to why the audio channels and mixer changes?

you can check the clip you are dragging to the timeline, if it has 8 tracks... can check by right clicking it in the project bin, choose modify, audio channels.
The Video Road – Multichannel Audio in Premiere Pro

Audio and Video sound cuts out when adjusting the volume whilst playing powerpoint presentations

I have just bought a new hp laptop and when running power point presentations with embedded media (for my job) I cannot adjust the volume of the sound when the audio or video file is playing. It simply cuts out and stops the video or sound from playing. I thought at first that this might be an Office 2010 issue but now it seems more likely to be a setting on the laptop. If anyone has any answers they would be much appreciated!! Many Thanks

I hear you on this. I just tested out the 3GS video for a concert where band mixed electronica and guitars.. boom boom satellites and I noticed when close to the speaker side of the stage the sound cut in/out. But when I moved farther away sound remained consistant.
What I may suggest is lowering the volume to mid range when closer to your sound source then
correct (if needed) using outside software.. iMovie Final Cut, etc..
Yes, I wasn't to please about losing sound on a what I recorded.. ~A~

Self-made .aif and .mp3 Audio files play in Library and Audio Inspector windows but not in the Timeline, when dragged into the timeline under video clip already there. FCPX 10.1.4, OS 10.10.4, iMac (late 2012), audio files are recordings of my own li

Audio clips play in Library and Audio Inspector, but not in Timeline

dougfromwanamassa wrote:
…but not in Timeline
Post a screenshot of your timeline… there're several ways to mute an audio track ...

How to turn off audio when scrubbing in the timeline

Hi
how do i turn off the audio whilst scrubbing in the timeline?
thanks

View>Audio Scrubbing. Uncheck it.

How do I get the beeping to stop when playing in the Timeline?

This is probably one of the most elementary questions, but for some reason I can't seem to figure out - or find in the documentation - how to get FCE to stop beeping when I play something assembled in the timeline.
In other programs I've tried (Adobe Premiere Pro for example), you hit the space bar and it plays - with audio in-tact and in sync. Here, I hear a steady beep.
Doing some research, I found that this might have something to do with unrendered audio; the problem is, every time I try to render audio with this program, as soon as it finishes it locks up BEFORE the audio file is written to the disc. And I've let it sit for over five hours - nothing.
Any help anyone could provide would be greatly appreciated.
Quad 2.5 GHz PowerPC G5 Mac OS X (10.4.7)

Thanks for the reply Max. The original video came from a DVD which I ripped via HandBrake. I then, after three days of googling and finally getting an answer from some one on this forum, re-exported the resulting MPEG4 into a DV format file through MPEG Streamclip.
After reading that it needs to be in 48k format, I re-exported from MPEG Streamclip and this time, hit the option for "Resample to 48k". I brought it back into FCE and put it on the timeline, but still needed to render.
This time, I watched the folder the render sequence file went into. As soon as it finished, the render file DISSAPEARED. I'm assuming it was moved or deleted but I don't know where it could have been moved to.
Trying to use anything in the FCE interface now results in the application locking up. I can't exit it or use it at all - it's force quit or let it sit (which as I said, I've let it sit for 5+ hours earlier).
Prior to starting that render, I set the permissions on the folder ~/Documents/Final Cut Express Documents/ to read and write using Finder and applied it recursively (to all sub-folders). So there aren't any permissions problems.
Honestly, I want my money back for this program. This is unacceptable. Any Apple technicians want to give a crack at this?

Video shrinks when dragged to the Timeline

For some reason, a Quick Time File I've imported shrinks to about 1/4 size when I drag it onto the timeline. Any ideas. It may help to know the video is a completed project that I burned to DVD and then pulled back off using Cinematize (trying to free up disk space before effects) Any help would be greatly appreciated

You either used Cinematize incorrectly, extracted the DVD to the wrong format, or the sequence settings are in the wrong format, or the original dump to DVD is in the wrong format. Check item properties of your sequence and your your media and see what they say.

How can I get real time updates in multiple views when scrubbing through the timeline?

I am using After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll through the timeline, one view updates in real time, this is great! If I open a second view, it only updates that view when I finish scrolling.
I would like to be able to scroll back and forth through the timeline, and have two different compositions update in real time (live update)?
Is this possible?
Thank you!

The long answer is: No. It's not even a performance issue, it's how AE evaluates time, since time is fluid and can be mangled in a million ways from time-remapping to expressions...
Mylenium

My audio levels barely increase at all when adjusting in the timeline

Similar Messages

Maybe you are looking for