My audiobook is not saving my place

I bought an audiobook and it starts over everytime I want to listen to it.  You cant download audiobooks again because they are not saved in the cloud. Fail Apple.  So I need to fix this one.  Any ideas?

audiobooks are accessed via the Music app on your iphone (not via iBooks).

Similar Messages

  • Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

    Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

    Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
    You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • TS1702 audiobook on ipad2 not remember my place

    When I play a audiobook it always loses my place.  I am using the ipad music to play my audiobook.  Is there anyway to get it to remember where I was the last time I played it.  I have tried to go to get info but the option tab is grey out and I cannot make changes.  Anyone have any ideas

    I get CD books from the library. There are usually 10-15 in a typical unabridged novel. I put the CD in with the parameter to show CD only. I select ALL tracks, join them, and then import. After all CDs are on board, I have to edit the info for all of them, and this is where I set the remember position flag. I then have a Smart Playlist that looks for this title only, and for those tracks that have a playcount of zero. It works very nicely on my IPod. I can't figure why it loses position. This morning it was right where I left off.

  • Selectable map not saved in fillable PDF form file

    Hi all, I have a problem with a document (it's a book for children) which has been created using InDesign CS6 on Macintosh. I need to make a fillable form (which is not a problem) and I have applied the "Extended Features for Acrobat Reader". I guess the client uses Acrobat Reader for Windows.
    The problem comes when the client asks me to include a map where the pupils can select the countries, and that I have solved using buttons that show/hide these countries. It works fine, but when the client fills the form and saves the document, the map doesn't save the selected fields.
    How can I make it work properly? I also tried creating a "SAVE MAP" button, but unfortunately, Acrobat only applies this feature to the current state when I create the document, NOT when the client clicks on this "SAVE MAP" button. Is there another solution, please?
    And there's still more... In another page, the pupils must select 5 words, and the problem remains the same... the selected fields are not saved.
    I hope I've explained myself correctly, I know it's a bit confusing.
    Thanks in advance!!

    If you will be adding up the mileage reimbursement amounts you might need to round the result of the calculation to 2 decimal places and that will require a custom JavaScript calculation. Using unrounded values can result with an answer that does not add up to the displayed value.
    Using the simplified field notation also requires that field names meet a very specific format. The field names need to start with an alphabetic character and it cannot have any white space character in the name unless some additional coding is done. These restrictions are a result of processing the formula string with JavaScript and how the data string is parsed for processing.

  • When editing a photo in iPhoto it is not saved

    I am a completely new Mac user. When trying within Iphoto "quick" editing mode, when clicking "ready" (I am using a Swedish software) the changes are not saved. It seems as if I have to export it to another location and when using the export function, make the changes (eg transforming it into X number of pixels), place it into eg the desktop and then import it into Iphoto. Seems extraordinary clumsy?

    Are the photos you're cropping from a digital camera?  If so then their size ratio is 4:3 which is the same as the 1000 x750 ratio your cropping to. 
    That 1000 x 750 isn't pixels, it's just a size ratio. So if you cropped a 4:3 image to 1000 x 750 and let it encompass the entire image there was no change to the image at all.  If you had resized the crop window down considerably it would have reduced the pixel dimension of the image.
    As you found out you can change the pixel dimensions by exporting.  Or you can export at full size and use a 3rd party image resizing app like Resize! to resize both the pixel dimensions and (if so desired) the file size by applying more jpeg compression via the Quality slider to the file.
    OT

  • Hyperlinks not saving

    Hi,
    I'm currently rebuilding my website with lots of hyperlinks taking you to pages that don't appear on the nav bar. All was fine in the beginning, but after putting 10+ links on the same page, all going to different places I find that they are not saving, and rather than going to the page I want them to, they are all going to a pdf file (this may have been the original button that I copied and pasted, but then I changed the details in the hyperlink box so that it would take you to the various pages.)
    It doesn't matter how many times I click save, or publish between each link or doo them all in one go, whenever I go back to the button has returned to linking to the pdf file.
    HELP! I feel like I am wasting my life away here, and iWeb is supposed to SAVE me time!

    I have found that it works much better, for some reason, to make links on a separate
    page and then copy and paste. The whole link process in iweb can drive you nuts, especially if you are changing fonts and formatting at the same time. It's very sensitive to the order in which you do things I think.

  • Since upgrading to 31.4.0 my Reply messages are not saved.

    When sending a Reply I get an error message "There was an error saving the message to Sent. Retry?" Clicking OK brings the same error message again and again. Cancelling or closing the error message stops the error message, but my Reply is not saved, though I've subsequently confirmed that it is indeed sent.

    Hi Jonty, and a warm welcome to the forums!
    If I could see how to post a screenshot I would as this might help for you to see the problem.
    Find a place to host the pic online, then Look at this post telling how to format (including adding graphics) posts for Apple Discussions...
    http://discussions.apple.com/thread.jspa?messageID=607563
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.

  • Why are my deleted emails saving in my 'pictures' as a PDF adobe when they should have been in my deleted email file not saved in my pictures??????

    Why are my deleted emails saving in 'my pictures' as a PDF adobe when they should have been in my deleted email file not saved
    in my pictures??????

    I deleted emails from my windows emails and when I went into my pictures there was all my recently deleted items as pdf adobe files and I cannot right click and delete. But why would my deleted emails be going to my pictures in the first place. So i think it must be in how the adobe program is set up and need to know how to change the settings so my deleted emails are not sent to my pictures.I do not know what other details you would require?

  • Last changes not saved??

    Ok I have an issue with Flash CS 5.5
    When creating content and publish the swf and then save the fla file , all seem fine.
    When closing the fla and reopen it later, the last changes I made are not saved??
    This happens NOT every time.
    At first I thought it was me that I didn't save the document before closing, but no this really happens!!
    Never had this issue anywhere, but for now my only option is to stay with CS5.
    Does anyone have similair issues with 5.5?
    Menno
    running Win7x64,  24 GB Ram,  GTX 580

    I am having similar issues with flash CS5.5.
    On the stage in flash I have 4 text blocks. Instead of creating separate instances of each text block, I create one graphic and separate the text blocks into separate layers. Next I put each text block into it's own key frame while on it's own separate layer. So layer one is on frame 1. Layer 2 is on frame two and so on and so forth up until frame 4.
    Now on layer two I put a blank key frame on frame 1 so that the text block for layer 2 does not show up until frame 2. Same with layer 3, and layer 4 with each text block. This is for animation purposes.
    Now I'm back on the main stage and timeline. I bring in an instance of the new graphic symbol I've made. I go into my properties pallet down to the loop option and tell the graphic to play single frame and it's first frame is frame 1 then I put in a motion tween, the new motion tween NOT the classic tween. I do this so I can use some preset animations that I've created. I then drag that instance of that animation I just created a little on farther down the timeline. I then go to my properties pallet and change the frame it's supposed to play from frame 1 to frame 2. Still using the play single frame looping option. I do this until I get all 4 text blocks to come in as I need them and when I need them.
    Also after each animation is done, I put in a blank key frame by hitting the F7 button to insert one after the animation is done. I've attached a screen shot of my main timeline and also a screen shot of what the inside of my graphic instance is supposed to look like when I finish editing it to look as I need to to do as I want it to do, to help explain my issue. As you can see from the image, I have several key frames inserted on a layer above the motion tweens after the motions end. At these key frames I input the frame number that the previous animation just played. This saves on layers, and saves on creating several graphics which reduces my file size because I am using the same instance of one graphic instead of instances of multiple graphics.
    Now the problem is after I save the file and close it out, I then re-open the file and the graphic I just created reverts to the initial creation of said graphic. So all text blocks of my text are on frame 1, layer 1. All the layers I created, all the work I did in creating that graphic is gone. The animations are still in place, and the frame numbers for the looping option are still in place. In fact the looping option of single frame is still in place. It's the graphics that continuously revert backwards instead of staying as I've made them to be.
    This also happens with drawn objects that I've converted to a graphic symbol and groups of images I've converted to a graphic symbol doing the exact same thing I did for the text blocks only using either drawings via the drawing tools in flash or bringing in bitmap images. Note this does NOT affect buttons or movie clips as far as I know. This is something that has been going on for weeks since I've upgraded to CS5.5 flash. It doesn't make sense and it should not be doing this. I had no problems like this using CS4. My clients required that I use CS5 because they were updating to CS5 so I did as requested. Now I run into this problem. It makes for extra work, my clients are not happy with this happening and I need a fix as soon as possible.
    Thanks,
    h_cline2
    Flash Animator/Developer

  • Signatures not saved

    I recently had a problem when I wanted to send a mail with too many adresses, so the system did show an error message with an overflow window off the screen making impossible to close it because the button where out of the screen. So I looked for a solution here in the forums and found this:
    Try the steps suggested on this page. If unsuccessful, see below.
    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    This does not worked. Later I fix it with a simple solution. But because of the prior procedure (in blue) I did something wrong, and now, the mail signatures are not saved when I text it and configure in the mail preferences. I reinstalled Mavericks and nothing, I copied the signatures folder of my MacBook Pro and now I have these signatures, but when I want to modify it, they are not saved again, I only have the copied ones. What file I am missing and where I can obtain it to fix this? Thanks in advance

    I just logged in for the exact same issue!
    I am guessing that there is a preference or other small part/user library that is corrupted. I do not know which one, so hopefully someone here will have the answer!

  • Excel COMException : 0x800A03EC Document not saved.

    Hello,
    I am using Interop.Excel in my WinForms application. The application is used to copy some sheets from one workbook to newly created one.
    The newly created workbook is saved when I don't copy shapes. But, when I copy shapes into newly created sheet, the workbook is not saved and COMException is raised with message "Document not saved".
    Scenario :
    I am working with three workbooks simultaneously. 
    MainWorkbook - this workbook contains data to be written into new workbook.
    ResourceWorkbook - this contains sheets that are copied into new workbook.
    OutputWorkbook - this is the result workbook.
    Step 1: Open MainWorkbook. Get data to write in OutputWorkbook.
    Step 2: Write data into OutputWorkbook.
    Step 3: Open ResourceWorkbook from resource file for copying the sheets.
    Step 4: Copy sheets from ResourceWorkbook into OutputWorkbook.
    Step 5: Save OutputWorkbook.
    In step 5, if there are no sheets with images copied in step 4, then the OutputWorkbook is saved. But, if there are sheets containing images, the OutputWorkbook is not saved.
    I am using VS2010 and MS Office 2010.

    Hi,
    According to the description, the issue seems that relative to the specific worksheet which containd shapes.
    I am trying to reproduce this issue in Excel 2010 using VBA, howerever it failed. Here is the test sample which set write the value to the Book2 and copy the worksheet contained shapes from Book1 to Book2:
    Sub CopySheet()
    Application.Workbooks("Book2.xlsx").Worksheets("Sheet1").Range("A1") = "Hello Word!"
    Worksheets("Sheet1").Copy Application.Workbooks("Book2.xlsx").Worksheets("Sheet1")
    Application.Workbooks("Book2.xlsx").Save
    End Sub
    Could you reproduce the issue with code above? If not, a sample worksheet and code snippet to help us reproduce this issue is much appericate.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Data gets not saved?

    Hi
    i am new at programming and also i am dutch so my english is not that high quality. sorry for that.
    reading is a lot better than writing ;)
    So here is my problem (i use visualstudio 2013 express)
    my goal is to design a desktop app that keeps track of rented tv`s and Phones in a care home. (place where old people live)
    i made 2 forms and 1 local database.
    form1;
    Public Class main
    Private Sub AddTvToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles AddTvToolStripMenuItem.Click
    add.Show()
    End Sub
    Private Sub main_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    End Sub
    End Class
    form2;
    Public Class add
    Private Sub TelevisieBindingNavigatorSaveItem_Click(sender As Object, e As EventArgs) Handles TelevisieBindingNavigatorSaveItem.Click
    Me.Validate()
    Me.TelevisieBindingSource.EndEdit()
    Me.TableAdapterManager.UpdateAll(Me.Database1DataSet)
    End Sub
    Private Sub add_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    'TODO: This line of code loads data into the 'Database1DataSet.Televisie' table. You can move, or remove it, as needed.
    Me.TelevisieTableAdapter.Fill(Me.Database1DataSet.Televisie)
    End Sub
    Private Sub TelevisieDataGridView_CellContentClick(sender As Object, e As DataGridViewCellEventArgs) Handles TelevisieDataGridView.CellContentClick
    End Sub
    Private Sub TelevisieBindingNavigator_RefreshItems(sender As Object, e As EventArgs) Handles TelevisieBindingNavigator.RefreshItems
    End Sub
    End Class
    now the problem is, when i debug all is working ok
    it gives no errors, all data shows i can add and remove data etc. But when i close the main form (form1) and restart debug
    it has lost all changes. so it is not saving the data. earlier when i had just 1 form it did. and i cant figer out why?
    greets masters.

    But when i close the main form (form1) and restart debug it has lost all changes. so it is not saving the data. earlier when i had just 1 form it did. and i cant figer out why?
    That is correct. The data that you are using for debug should be the same each time you start a debugging session.  If it changes, you can't compare one debug session with the next, so you can't know what effect your code changes have had.  
    Also, if there are errors in your code, you do not want invalid or incorrect data being stored into your database.
    You can see some discussion of how to use data for debugging here:
    https://msdn.microsoft.com/en-us/library/ms246989.aspx

  • My pinned tabs are not saved in Firefox 9

    I updated firefox yesterday to 9.01 and now my pinned tabs are not saved when I reopen firefox. I had hoped the days of having umpteen problems on each update were gone now there is a little one every couple of weeks but no, it's still a pain.

    Well that was odd, decided to check addons and started firefox in safe mode and my pinned tabs were there so restarted it to disable addons one by one but before I could do anything my pinned tabs were back in place. Lets hope it lasts.

  • In/Out not saving in preview clips

    I can't get the IN/OUT trim points to save on preview clips, am I doing something wrong:
    1) In "Organise" mode
    2) Double click the clip - preview window is displayed.
    3) Drag in/out markers to right place
    4) Click the "X" top right to close it
    5) Re-open the clip, in/out not saved
    6) Drag to timeline, in/out not saved
    What am I missing here?
    These are quicktimes from Canon 5D MK II if that makes any difference.
    - Simon

    You're trying to trim in Organize mode.
    Instead, click on Project to open the media panel. Double-click your clip in the Project media panel and set your in and out points in the Clip Monitor. They should stick.

  • I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

    I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

    You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
    You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
    You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Maybe you are looking for