My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?
My aux input does not work. When i put in my headphones my mac does not respond, and my speakers just continues as normal. What to do?
I had the same issue. Initially i thought i need to take it to apple for replacing the aux port. But luckily I was able to fix it by resetting the PRAM . To reset the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
You can try this before you take to apple store. It may work if you are lucky. Good luck
Similar Messages
-
when i open illustrator and i do something the text appaers (it's not responding) and then the whole screen turns white, what can i do?
hiskebdb,
If it happens when moving an object/text, the issue may be caused by the Chrome Pushbullet extension, see this post #3 by Matt with the solution,
https://forums.adobe.com/message/6984777#6984777
or by the Adobe Color extension, see this post #2 byhexxstatic with the solution,
https://forums.adobe.com/message/7095368#7095368
or by the cache on the computer, see post #5 in this thread by Booklover with the solution,
https://forums.adobe.com/thread/1696375 -
when opening the firefox page and go to search the font is small and when try to make it large throught the content tab it not respond
Hi Gaurav
I already locked for a OSS note, but i could not find the answer
Please, Could you tell me how you solve the problem?
Thanks
Ariel -
What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.
You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution. -
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
As I am doing things on any site and very randomly everything stops and I get the message that mozilla firefox is not responding and I have to wait up to a full minute before it starts again
-> [[Firefox hangs]]
* http://kb.mozillazine.org/Firefox_hangs
Check and tell if its working. -
I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info and I do not know how to get in touch with him I have had third gen ipods and never had any problums like this before Help!!!
Either get the Apple ID and password from him to activate the iPod
iCloud: Find My iPhone Activation Lock in iOS 7
or have him remote remove the device from his account
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
or return it for a refund.
Otherwise you have an expensive, thin brick -
My ipod touch headphone jack do not work when I plug in any headphones to it. How do I get to listen on headphones with my IPod touch?
You likely have a problem with the headphone jack. You jhave to ways to listen to music via headphones:
- Get the jack fixed. Here is one place:
DigiExpress.us - The iPad Repair Professionals
However first I wold rule out a software problem by try the following:
Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults.
The other way is to use bluetooth headhone if you have a 2G or later iPod. -
when i try to use facetime on my imac it comes up with facetime not responding and starts to use nearly 2gb of memory. Any ideas please?
Also messages does the same thingHello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
i have been using FF for years. it auto updated to 4.0.1 but now when i open FF. Do a search. as soon as i press enter system ram goes down and FF says not responding. and it uses 500mb RAM + and i have to force close. i have re-installed it and even factory rest my laptop thinking it was that. but Still the problem persists ??? i have gone back to a older version and that is working fine as i am using it to ask this question
Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.
-
My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.
-
When I try to start Firefox, I get a message that it is already running, but not responding and that I should close it before trying to run another Firefox. But I cannot find a way to close Firefox program that is not running as far as I can see. I tried uninstalling and reinstalling Firefox, but that did not work. I've tried various other things, but no luck. I thought programs should stop when the computer is turned off, but that didn't work either.
How are you opening the Profile Manager?
*http://kb.mozillazine.org/Profile_Manager
Sounds that Firefox is still or already running.<br />
See:
*http://kb.mozillazine.org/Kill_application -
I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?
Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue! -
Photoshop crashes each time i start it and it then does not respond and after 3 to 4 min sarts
On starting photoshop on my macbook pro it crashes and does not respond and only after 4 minutes does it start, does any one have any suggestions on how to fix this as it is annoying to always have to wait for photoshop to start
Hi Andy. Can you give us some information?
Which version of OSX?
Which version of Photoshop?
Is this a new installation? Or how long has it been working OK before this problem?
Do you have any external drives?
What are your Photoshop Scratch disk arrangements?
The sort of issues that can cause a crash on start up are bad fonts
Fonts — Troubleshoot
Third party plugins
Looking for a scratch disk that does not respond
Driver problems — video card being a big one.
Troubleshooting Steps to Fix Most Issues -
Flashplayer pop up box "Requesting permission to store info on my computer" does not respond and will not go away. How do I get rid of it. It is most annoying as it stays right in the middle of the screen.
Move cursor onto video. Right click. Click Settings, Click the "never ask again" box. Then click Close. That will work.
For some reason, that always worked for me, but in the last two days, it does not work, and it seems to freeze on the
video. See, if it works for you.
Maybe you are looking for
-
Background job not working for VF02
Hi, When i give schedule RSNAST00 report in background for one output type its not generating spool, but the job status is in Complete. But in foreground it fine. For another output type its working fine in background. Is there any printer setting ha
-
Import Purchase Requisitions from one Operating Unit to a different Operati
The need is to import Purchase Requisitions from one Operating Unit to a different Operating Unit. There are 2 operating unit with one inventory orgs in each. But the 1st is OU( It is a club) merely creates Purchase Requisition, and its not a advisab
-
Today's Esoterica: What are the Differences between Tint, Tint, and Tint?
There are three controls in Aperture named Tint: - The lower half of the "Temperature and Tint" panel in the White Balance Brick. - The eponymous section in the Enhance Brick - The eponymous Quick Brush, which, when used, creates a Tint Brick. Are th
-
Battery serial number on my mac
recently I've given my macbook pro for harrdisk repair and after I took it back my battery doesn't last as long as it use to. I have a suspicion that they have kept my original battery and replaced it with an older one. is there any way you could tra
-
Dear Gurus, I put over tolerance 10% in me27 and create delivery. At the time of goods receipt agains outbonddelivery there is no effect of over tolerance% in SAP. So how can i take over tolerance delivery.