My battery on my 4S is worse with the OS upgrade. ***. Never had an issue before. Ugh
Well - bought the 4S and didn't have any of the battery issues. Downloaded the iOS 5.0.1 update and the battery is worse. Crazy. Anyone else having the same problem?
I have been an apple user for years and do understand that an increase in processing power and antennas kill batteries. But this is strange, especially after an upgrade.
While typing this on my iPhone, battery dropped 2%. Five mins. Ugh.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
More details on my thread here if needed: https://discussions.apple.com/thread/3484755?start=0&tstart=0
Similar Messages
-
I recently downloaded some new music from the itunes store and created a new playlist. My phone will not sync with either the new music or playlist, this has never been an issue before. I have rebooted both my comuter and my phone.
Why is it not syncing?
Any errors?
Is the device detected in iTunes? -
i have a new iPhone 6+ and iPad air 2 and have tried to re activate keychain but nothing works
I Have checked the contact number and all seems correct, but still the sms with the code is lostDebit card? Are you sure?
USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances." -
This software is killing the battery life. Anyone find a way to solved this issue with their iPads? If not, is there a way to go back to the last software, this is not acceptable.
I have no issue since upgrade to IOS 7 no loss of battery life and you cant downgrade,apple dont support it
-
Im trying to import cds i got for xmas onto my itunes and they arecoming up with no artist/album cover or track names, when i click get track info it says i have not internet connection, but im on my windows laptop and can get on the internet, is there something i need to so in itunes tmake it rcognise the album details?
Hey there lollypops21,
It sounds like you are connected to the internet otherwise, but iTunes is giving you this error message when trying to get info from the Gracenote database to retrieve your album info. I had a couple of articles I wanted to recommend you try. First this one named:
iTunes for Windows can't access the Internet if proxy settings are incorrect
http://support.apple.com/kb/ts1490
You can always enter in the album information manually with this article if needed:
iTunes 11 for Windows: Edit song and CD information
http://support.apple.com/kb/PH12360
Customize song and CD info
You can edit information in the Info window to make it easier to find and sort items in your library. For example, you can:
Group individual movements on a classical CD into one work by indicating the name of the work (for example, “Piano concerto in A Minor, Op. 54”) in the Grouping field.
Group songs that are part of a compilation together in your library by clicking the Info button and selecting the “Part of a compilation” checkbox.
Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Create your own genre category by clicking Info and typing the category in the Genre field.
Change the order in which tracks on a CD play by changing the numbers in the Track Number fields.
Create a Smart Playlist that includes only songs that are just the right speed for your workout by typing the number of beats per minute in the BPM field. For instructions, see Create a Smart Playlist.
Identify a movie as a music video (click the Options button, and choose Music Video from the Media Kind pop-up menu).
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook.
Enter custom sorting criteria for an item. Select the item, choose File > Get Info, click Sorting, and enter the custom text.
iTunes retrieves CD information from the Gracenote media database. For more information, visit the Gracenote website.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!
Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness. -
My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.
If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
And try here. Troubleshooting iPhone hardware
Powering Apple and third party peripherals through USB -
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.
In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in. Then try to sync your purchased music to your phone again.
-
Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates < -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?
kitts1979 wrote:
My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?
No in order to backup to iTunes, you would need to unlock your phone.
In order to import pics to your computer you would need to unlock your phone. -
How do i turn off apps running in the background with the new upgrade?
how do i turn off apps running in the background with the new upgrade?
They changed it a bit, but you can still close apps. Double click the Home button to pull up the currently running apps. Side scroll over to the app you want to close, then swipe up on the app *window* (not the icon at the bottom).
= L.I. -
Unable to find a Re-Seller willing to sell me an Upgrade from Acrobat 9-Pro to XI. Live in Puerto Rico. Cannot buy through the Adobe Website. Locally identified Re-Seller unable/unwilling to provide me with the advertised Upgrade. My Options are; please?
Reason I had to chat with Customer Support is that I got the following message upon placing Upgrade Order.
What Different Country? It's the US. The ONLY placed I've lived my entire life! Apparently some software changes were made to the site and the PR Territory fell in a no-man's land. -
A year or so ago I had turned on a toolbar that sat at the top with the other toolbar, and had many tools for development and checking of websites. You could turn Java on/off, javascript on/off, turn on source view, and many other things. Now I cant find that toolbar. All that I can find now turns on a panel in the lower half of the window that probably does all the same stuff, but it takes up much more room. Where did that toolbar go? or was it an add-on or plug-in?
It sounds like you may be referring to the Web Developer add-on.
* https://addons.mozilla.org/firefox/addon/web-developer/
Maybe you are looking for
-
Problem printing with Reader 9.4.5 and 10
I recently upgraded to Windows 7. I have a Cannon Pixma iP4300 printer and have installed the Windows 7 driver that I downloaded manually from the Cannon website. The test page prints on this printer, as do Office files and images. When I print a
-
Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12
This is to inform you about a strange behaviour in Webutil V1.0.6 Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10 Oracle Server 10.2.0.4.0 Enterprise Edition Client-envionment : Windows 2000, IE 6 I created an Forms bas
-
i have 3 .java files that make up an application. DrawJPanel.java Elevator.java and MyRectangle.java.............i would like to put DrawJPanel.java and MyRectangle.java into Elevator.java.....and i'm not quite sure how that works......help would be
-
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/912921]]</blockquote> Helping a friend with older computer. Windows based. Used IE to find Firefox website. Hit download button. Chose to run. About two minutes later receiv
-
Help, I paid but account has not activated. Talk to tech, someone was suppose to get back to me but no one has. What do I do-massively frustrated