My Blackberry not being recognise and not turning-on

I was waiting for operator assistant to activate my T-mobile sim that accidentaly delete or call window. After that happen, I'm still hearing the computer generated voice call that I was waiting and release the battery to restart... unfortunately now It wont restarting. PLS HELP!

1miguelo, you may be able to revive your #Z10 using an autoloader OS file and following instructions in the initial post if this thread
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

My Canon PIXMA MG2440 USB is not being recognised and I can not print anything..?

I cannot use my printer as the USB is saying its not recognised.
I never needed a driver for this printer before and it used to work fine.
I have no idea how to get my printer to work as I cant connect it to my laptop?

Hi mrsrsimmo,
If the printer is not being recognized, please try connecting the printer to another USB port on your computer, and also use a different USB cable if you have one. We also recommend installing the latest drivers and software for the printer. Since you have the PIXMA MG2440, please click here to go to the Support and Downloads page on the Canon Europe website where you can download the drivers.
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

WD My Passport Ultra 2TB not being recognised and crashes computer

Hi, I have my external Harddrive for about 1 1/2 year. It always worked fine. Last Thursday it stopped. Suddenly it wasn't recognised anymore and it slows down my computer until halt. And it stays like this until I remove the harddrive again. After I remove it the computer works fine again and I get a little popup from Windows that tells me "You need to format the disk in drive E: before you can use it." I don't want to format it, because I have lots and lots of data on that drive. I made a backup from my computer I formated for an upgrade and now - if I can't get the data recovered - they are all lost. I tried already the WD LifeGuard Diagnostics but my harddrive is not recognised at all, so I can't check of any faults.It is not recognised in the Diskmanagement either. Sometimes - very rarely though - I see under "Computers" in the Explorer "Local Disk" (no Drive number). I cross checked already with another cable, another computer and even another OS. No luck.I tried to register the drive for creating a RMA but there seems a problem on the WD Website.I don't want to give up that drive. Can please someone help me? Thank you in advance

This is a user forum, not a staff one. There aren't any WD staff here, at least in an official capacity. At best you'll only get WD support here if one of the mods escalates it to them, but you'll be quicker to do it yourself via the support portal.

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

Hi Cjroyle,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo on the screen. To troubleshoot this issue I'd like you to please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

IPhone 3G not charging and not being recognised by PC

I plugged my iPhone 3G into my laptop today to charge it, as the battery was extremely low and for some reason, it's not being recognised by my computer at all, and it's not charging at all.
I've tried plugging it into a powerpoint in the wall as well, and it still doesn't charge.
I plugged my iPod into my computer with the same USB cable, and it worked fine.
If I hold in the power button at the top, the battery picture comes up with a tiny bit of red in it and the power cable -> charge pictures come up underneath, then the screen just goes black again.
I've never had this problem before, so I'm not sure what to do.
Any help would be greatly appreciated.

I had the same problem after the upgrade, but think I may have a solution. The problem doesn't seem to be that the phone isn't charging, it's that the indicator isn't showing that it has charged. Try this:
1. Plug into the wall socket.
2. Push and hold the power button, you should get a "slide to turn off" kind of message -- do it.
3. Let the phone power off, and leave it that way for a slow count of ten.
4. Turn it back on by pushing and holding the power button -- you'll get that black screen with the apple logo, don't panic, it just takes a minute to power up, you haven't lost anything.
When it came on, the indicator showed it was fully charged from the night before. My concern is that the indicator got hosed by the upgrade.
Try that out, let me know if it works -- and at your own risk. It worked for me as written, but I can't guarantee that will do the trick or not wipe your phone. I don't think so, it seems innocuous enough, just wanted to make sure you're aware there could be another resynch needed if it does do something else for you.

Issues with Blackberry Playbook not being recognised by Windows Explorer

Hello, I'm new to the forums but am having the same problems as many others are, that being my Playbook not regonised by Windows Explorer. I have tried all of the solutions I have read like unistalling Desktop Manager, uninstalling then re-installing drives in Windows Device Manager. But one I recently stumbled across was uninstalling Blackberry Device Manager, how do I do this?
Also the main problem appears to be that my Playbook will not sync anything with my computer. In Desktop Manager I can back-up my Playbook, but not sync anything. After re-installing a drive I now get the message of: 'Your Blackberry device is not compatible with this feature' whereas before I got the message of: 'You haven't configured any sync methods' but yet all of the sync options were greyed out.
How do I get Windows Explorer to recognise my Playbook as a drive and how can I sync in Desktop Manager?
Thanks in advance!
Note: I'm using Windows 7 32-Bit

Hello Tobster_,
The following article should also help with detecting your BlackBerry® PlayBook™ tablet:
Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook - http://www.blackberry.com/btsc/KB27424
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

My FaceTime camera is not being recognised why? and how can i fix this problem

I had this program called vdcassistant and apparently its a virus so I removed it and now my FaceTime Camera is not being recognised can someone please tell me how to fix this, and i have no time machine back ups

Reinstall Facetime application.
Check system profiler for your inbuilt iSight camera by looking at Hardware > USB > Built in iSight.
Perform an SMC/PRAM reset:
SMC RESET:
Unplug all cables from your machine including the power cable. Hold the POWER button for 10 seconds.
Plug all cables back in and boot machine.
PRAM RESET:
Locate COMMAND+OPTION+P+R Keys.
Turn on the Machine.
Hold down these four keys.
Until you hear the startup sound for a second time.

HT4623 have just ugraded IPhone 5 to I07. My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect. Any suggestions. I cannot restore on itunes cant turn off the find my iPhone..

I have just ugraded IPhone 5 to I07. My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect. Any suggestions. I cannot restore on itunes cant turn off the find my iPhone..

From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.

My ipad (mini) and ipod are not being recognised by itunes?

When connecting both my ipad(mini) and ipod(7th gen) they are not being recognised by itunes. I last connected just over a month ago and everything was fine. When I last connected I also connected my old ipod(3rd gen) to add new playlists beforing giving to someone else. When I first plugged in I got a message saying that the cable was not Apple authorised - both my cables are cables supplied with my ipod/ipad so came from Apple? When I run diagnostics it says
"Most recent devices not currently connected, - iPod Nano (3rd Gen) and iPad Mini running firmware 6.1.3" This is the first time I have tried to connect since updated my iPad with IOS7? Please help I wanted to put Christmas playlists on both devices.....!

Device Not Recognised > http://support.apple.com/kb/TS1538

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

My iphone 5 completely shut off and will not turn on nor is it being recognized by itunes.

Hi,
I updated my iPhone 5 to iOS 8 to check it out. Being in beta, I was already aware of all the bugs that were going to be happening. After much frustration, I decided to downgrade bake to iOS 7.1.1. While I was doing this, my iPhone completely shut off, it will not turn back on even when I plug it into a wall charger or the computer, and iTunes is not recognizing it either. Is there any other solutions to this problem? Please help! Thanks

first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service.

After updating ios my ipad is stuck in recovery mode and is not being recognised by the computer in windows or itunes. Help!

Help - I am stuck in Afghanistan on operations and my iPad mini has died.
I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
I have tried several resets and restarted the computer and reinstalled itunes.
Is there anything else I can do.
This is my only method of talking back to my family at the moment and is really quite important.
JS

Thanks, I will give it a go. Will it work on my computer after I do that?
Jez

HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Blackberry not being recognise and not turning-on

Similar Messages

Maybe you are looking for