My blackberry Z30 is displaying a vertical pink line on the screen what should I do?

My blackberry Z30 is displaying a vertical pink line frn top to bottom of screen, what should I do to clear it, secondly the head phone need to be supported by hand before it can funtion.

That sounds like a display hardware problem. You should get the device replaced under warranty through your carrier.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • My display has vertical colored lines then gray. What should I do?

    My MacBook doesn't start up correctly. When the power is turned on, several thin rainbow colored vertical lines appear on the screen then the whole screen fades to white/gray. What do I need to do to remedy this?

    HellO:
    Take it in for diagnosis and service.  The problem appears to be hardware.
    Barry

  • The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    Take it to an Apple Store or other service provider for testing.

  • I have a vertical red line on my screen - what's causing this?

    I have a vertical red line on my screen - what's causing this?

    Have you tried this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • A vertical red line on the screen

    Sir, my product name is HP Pavilion g6 Notebook pc and having 64 bit operating system. Sir, a vertical red line has appeared on the screen and it is seen when i start my laptop.A few days ago it was dissapeared but next day it again appears.Please help me to remove it.

    Hello irohitgupta,
    Thank you for posting on the HP Forums!
    I understand your computer display is experiencing issues with a red line. I will do my best to assist you! To troubleshoot the issue, please refer to the relevant sections of this HP document: Display Quality Issues
    The sections I would like you to refer to are "several colored vertical lines in the display", "screen is discolored" and "general troubleshooting tips for display quality issues". Please try all of the troubleshooting and let me know the results.
    If the issue persists, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Mario
    I worked on behalf of HP.

  • I just bought an iPad 3 around 6 days ago, today I saw a vertical black line on the screen and I tried resetting my iPad but I couldn't fix it. I took it to many apple sale store and reseller but none of them agreed to fix my iPad, please help me with it!

    I'm currently living in Saudi Arabia but I bought my iPad 3 from Dubai around 6 days ago, my device is still under warranty but none of the apple stores are fixing it over here in Saudi Arabia... Please help me with my situation!

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Ipod touch stuck in recovery mode vertical pink lines on white background

    I have an older iPod Touch 16gig that has stopped responding. Whenever it starts up it comes up as a white screen with vertical pink lines. iTunes claims it's in recovery mode and needs to be restored. After 'preparing for restore' for a while it returns an unknown error (1604). I've tried it on multiple computers (PC and Mac)and through an number of different versions of iTunes (I keep trying it every new version hoping it will sort itself out, but it still has the same errors.)
    I have an image of the screen if necessary, but not sure how to include it in this post.
    Any help will be appreciated.

    Work through the troubleshooting hints in this article: http://support.apple.com/kb/TS1275
    You will probably want to turn off your firewall as well as that is one of the possible problems you are experiencing.
    I don't know what old iPods look like when the die, but yours might be close. Good luck with it.

  • I repaired a cracked iphone 5c screen now I have a black screen with a vertical blue line on the left hand side of the screen. please help!!

    Hi all,
    Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
    I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display.  I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.

    purplesunshine3 wrote:
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.
    Since you were successful the last two times, I'm sure you will figure it out.

  • Why are there 2 thin red vertical lines on the screen of my MBP 15" retina which is only 2 months old!

    I would just like to understand why there a two thin red vertical lines on the screen
    I suspect I need to bring into an apple store for diagnostics but is anyone aware of the likely cause?
    thanks v much!

    It could be a GPU issue, a display issue or a display connection issue.  The genius bar technician will offer you a definitive answer and should fix it under the warranty provisions.
    Ciao.

  • My macbook pro keeps freezing with vertical lines on the screen

    I have a 2010 macbook pro that has worked wonderfully until now.  As of late it keeps freezing with vertical lines across the screen.  To me this indicates a hardware problem, but I ran a diagnostic (restarted while holding D) and it didn't find any errors.  It seems that it happens when I move or bump my macbook, leading me to think it may possibly be a disk problem, but I'm not sure how to check this.  Anybody else ever have this problem or could suggest a fix for it?

    You can try a pram reset, which might help with the display, but the bumoing thing is what concerns me.
    PRAM reset:
    Power down, power back up and hold the following keys before the start up chime.
    option, command, P, R,(no commas) continue to hold these keys till you hear the start up chime 2 times then release.
    Reboot see if this helps, the bumping part scares me.
    Hope this helps

  • Satellite P100-286 - Vertical lines on the screen and constant reboots

    I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started freezing with vertical lines on the screen tried different options even tried recovery cd to re-install and after installation it started doing the same. I have read similar problems in the forum and is this a common problem with Toshiba? I have spend 1500 on this and it is only 3 years old. My friends have laptops older than this almost 6 years and in good working condition.
    Is there any solution or suggestion for this problem? The heat on the base of the laptop is really hot and it is like this for ages.
    Any help is really appreciated after spending this much would like to last longer or it is a realibility issue with Toshiba brand.

    It is happening in BIOS and even tried ubuntu on a boot cd and still having the same problem. I took to a PC servicing center they immediatly said it is a graphics card problem. The lines are comming in an external display as well. If you search in this forum you will see similar issues is reported by another user. I do think it is a genuine problem. The graphics chip is on board and it cost a lot to replace it that is what I been told.
    some link pointing to this type of issues
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=42897
    http://forums.toshiba.com/t5/Drivers-and-Utilities/Satellite-P100-screen-driver-issues/td-p/94671
    or in google search for "toshiba p100 video freezing"

  • 4 Vertical coloured lines on my screen

    I bought this ibook in August 2005 in Brighton, England, UK. For the first 3 months it worked with no problems. I then noticed 4 vertical lines on the screen. The lines run form top to bottom of the screen and they are evenly spaced across the screen. They are orange, yellow, purple and white and about 1mm across.
    Any ideas on how to fix this problem?
    Many thanks,
    Pete

    Hi Hanoipete,
    Welcome to Apple Discussions,
    You may want to look at Knowledge Base Document #22194 on About LCD display pixel anomalies as well as try running PiXel Check. If all else fails, bring it to your local Apple Store and see if they will replace it.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Vertical red lines on laptop screen cause shut down

    "hello sir
    i have hp g62 laptop 2 years old. i3 processor ,
    4gb ram, 500gb hard drive, window 7 ultimate and
    1gb graphic card
    my problem is when i turn on my laptop suddenly
    vertical red lines appear on screen and laptop
    screen shut it down while cpu keep running
    without screen
    i have checked with externel monitor and same
    lines seen on externel monitor as well so i think
    display is fine. some time its work fine for 2 or 3
    hrs
    please help
    thank you"

    HP Notebook PCs - Entering Safe Mode (Windows 7)Hi ,  Welcome to the HP Forums!It is a superb  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More  I understand that your display has vertical red  lines, sometimes it will work fine  sometimes for 2-3 hours.If you connect an external display and the same lines appear on it. Have you ran the Windows troubleshooter? Have you ran the  HP Support Assistant ? Have you looked for a HP driver update for the graphic card? As the lines appear on the external also I would run a hardware test on the computer. HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista) Have you checked for viruses and malware? If you start your notebook in Safe Mode do you have the same issue?   To say thanks for replying please click the thumbs up icon below. If this resolved your issue, please notify people by choosing solution provided.  Best of Luck! 

  • Urgent help needed: how to display a list of records on the screen

    Hello,
    This is very urgent. Can anyone help me. I have posted this query of mine before also but still no reply came. My whole application is dependent on this problem. Actually I am developing an application for mobile phone using MIDP. I have a record store which contains personal details for users. I am able to add records to the record store. Now I want that these records can be edited. For this I want to display a list of firstname field on the screen (and not console) so that i can select a user to edit its details. I have written the code to read the records and individual fields and display it on the console but i want to display that list on screen. I tried list and array but it s giving some error.
    I am giving the code to read the records below. Please tell me how can I display it in a list on the screen.
    public void readStream(){
    try
    byte[] recData=new byte[50];
    String varname;
    ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
    DataInputStream strmData=new DataInputStream(strmBytes);
    if (rsperdt.getNumRecords() > 0){
    ComparatorString comp=new ComparatorString();
    int i=1;
    RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
    while(re.hasNextElement()){
    rsperdt.getRecord(re.nextRecordId(), recData,0);
    System.out.println("Record #" + i );
    varname = strmData.readUTF();
    System.out.println("Name #"+varname);
    System.out.println("---------------------------");
    i=i+1;
    strmBytes.reset();
    comp.compareStringClose();
    re.destroy();
    strmBytes.close();
    catch(Exception e){
    System.err.println("read Records class:read");
    }

    I could not understand ur point "post the code in tags". I am pasting the code below. Please help as my whole application is stuck due to this problem and I have a deadline of 7th oct.
    This midlet is getting called from some other midlet.
    import javax.microedition.lcdui.*;
    import javax.microedition.midlet.*;
    import javax.microedition.rms.*;
    import java.io.*;
    import java.util.*;
    public class frmread extends Form implements CommandListener
    static final String rec_store="db_per";
    private RecordStore rsperdt=null;
    private Vector vecname;
    private ChoiceGroup chname;
    private boolean flagSortByPriority = false, flagShowPriority = true;
    private Form fmmain;
    private Command cmdBack;
    private teledoc midlet;
    public frmread(String title, teledoc midlet)
    super(title);
    this.midlet = midlet;
    openRecStore();
    this.setCommandListener(this);
         chname = new ChoiceGroup("new", Choice.EXCLUSIVE);
         vecname = new Vector();
         cmdBack = new Command("Back", Command.BACK, 1);
    fmmain = new Form("Record Search");
         addCommand(cmdBack);
    setCommandListener(this);
    readStream();
         rebuildTodoList();
         closeRecStore();
    * Process events for this form only
    protected void rebuildTodoList()
    for(int j=chname.size(); j>0; j--)
         chname.delete(j-1);
         int priority;
         todoitem item;
         String text;
         StringBuffer sb;
         for (int j=0; j<vecname.size(); j++)
              item=(todoitem) vecname.elementAt(j);
              priority = item.getPriority();
              text = item.getText();
              sb = new StringBuffer((flagShowPriority ? (Integer.toString(priority) + "-"): ""));
              sb.append(text);
              chname.append(sb.toString(), null);
    public void commandAction(Command c, Displayable s)
    if (c == cmdBack){
    midlet.displayteledoc();
    public void readStream(){
    try
    byte[] recData=new byte[100];
    String varname;
    int varname1=0;
         ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
         DataInputStream strmData=new DataInputStream(strmBytes);
         if (rsperdt.getNumRecords() > 0){
    ComparatorString comp=new ComparatorString();
    int i=1;
              int id = 1;
              vecname.removeAllElements();
              RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
    while(re.hasNextElement()){
         rsperdt.getRecord(re.nextRecordId(), recData,0);
    System.out.println("Record #" + i );
    varname = strmData.readUTF();
                   varname1 = strmData.readInt();
                   id = re.nextRecordId();
                   System.out.println("Name #"+varname);
                   todoitem item = new todoitem(varname1, varname, id);
                   vecname.addElement(item);
                   System.out.println("---------------------------");
                   i=i+1;
    strmBytes.reset();
              comp.compareStringClose();
              re.destroy();
    strmBytes.close();
    catch(Exception e){
    System.err.println("read Records class:read");
    public void openRecStore(){
    try{
    rsperdt=RecordStore.openRecordStore("db_per",true);
    catch(RecordStoreException e){
    db(e.toString());
    public void closeRecStore(){
    try{
    rsperdt.closeRecordStore();
    catch(Exception e){
    db(e.toString());
    public void db(String str){
    System.err.println("Msg:" + str);
    class ComparatorString implements RecordComparator{
    private byte[] recData = new byte[20];
    private ByteArrayInputStream strmBytes = null;
    private DataInputStream strmDataType = null;
    public void compareStringClose(){
    try{
    if(strmBytes != null)
         strmBytes.close();
    if(strmDataType != null)
         strmDataType.close();
         catch (Exception e)
    public int compare(byte[] rec1, byte[] rec2)
         String str1, str2;
         try {
              int maxsize = Math.max(rec1.length, rec2.length);
              if (maxsize > recData.length)
              recData = new byte[maxsize];
                   strmBytes = new ByteArrayInputStream(rec1);
                   strmDataType = new DataInputStream(strmBytes);
                   str1=strmDataType.readUTF();
                   strmBytes = new ByteArrayInputStream(rec2);
                   strmDataType = new DataInputStream(strmBytes);
                   str2=strmDataType.readUTF();
                   int result=str1.compareTo(str2);
                   if (result == 0)
                   return RecordComparator.EQUIVALENT;
                   else if (result < 0)
                   return RecordComparator.PRECEDES;
                   else
                   return RecordComparator.FOLLOWS;
                   catch (Exception e)
                   return RecordComparator.EQUIVALENT;

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

Maybe you are looking for

  • Rebooting the servers

    DB version: 10.2.0.4.0 OS : Solaris 5.10 Lets say for a 2 node RAC, you want to restart both the machines. After bringing down the CRS on both machines , Is it true that you shouldn't reboot both machines simultaneously?

  • SAP Business Connector and EDI

    Hi, I need to implement a new EDI version to use within Business Connector. However, I cannot remember where to extract the EDI template files from. Has anybody done this before and can inform me where to extract the EDI template files from. Thanks M

  • Delete Ghost Mailing List User (Mailman Config Bug)

    I recently did something stupid. On the up side, I recognized that it was stupid right after I did it, but unfortunately my effort to undo what I did wasn't fast enough to correct the following issue. First, here's what I did: I added a new group wit

  • Is it possible to upgrade VRAM?

    hi, I've purchased my current eMac about 1.5 years ago. It has 512 MB RAM and 32 MB VRAM, eMac G4 1.25 Ghz.. To be able to run a certain program at acceptable settings, i'd like to have more VRAM, let's say 128MB. Now, is there a way to do that? Woul

  • CustomRealm question

    Hello, I created a custom JDBC realm that I'm using in my application. I created the Cached Realm, and set the FileRealm to point to the caching realm I created. However, I'm seeing behavior that I don't quiet understand. In the online documentation,