My brand new iMac will not power up after an update restart, any suggestions?

Any suggestions on why my IMac will not power up after it done a restart?

Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help:
See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
If you still have problems, give AppleCare a call.

Similar Messages

Brand new iMac will not boot, just make's funny "bonk" sound.

I have a brand new iMac (Intel, 20-inch flat panel). Just out of the box. Ran through set-up wizard. Used firewire to transfer files from an old CRT iMac. All was good for about an hour.
Tried to empty the trash. Finder says Trash was emptied, but, if I open the Trash, the 50-odd files I just deleted are still visible! If I try to select one, its icon immediately disappears. Hmmm....
I decide it's time to restart.
Upon restart, computer will not boot.
I push the power button. I hear the startup chime as usual. Screen lights up gray. But no apple logo on the screen. There is a long pause. Screen remains gray. Computer then starts making a soft "bonk" sound every 4-5 seconds. (Kind of hard to describe the sound, just imagine clipping the very first fraction of a second of the normal Mac startup chime, and repeating it every couple seconds.) This continues indefinitely.
If someone has experienced this, or has advice, please let me know your thoughts. Feeling rather bummed. Thanks in advance!!!
iMac Intel 20-inch 2.16 GHz Mac OS X (10.4.8)

Boot from the Install Disk 1
I cannot boot at all (see my post above). The
machine just sits there with a blank gray screen.
I appreciate the article link, though. I've already
read it and it will make a great reference for the
future, provided I can get back to a place where this
iMac actually runs.
Since you're new to Macs, I'm sure you don't realize that while your iMac is sitting there with only a gray screen, you can insert/push in "Install Disc 1" - and it will be accepted. Then press and hold down the power button until iMac shuts down. After waiting a few seconds until everything has settled, press power button and immediately upon hearing the usual Mac startup tone/chime/chord hold down the "c" key until you see the spinning progress indicator below the Apple logo. It will boot to the DVD, you will be able to use (from the Utilties pull-down menu) Disk Utility to "repair" the hard drive directory, then you will be able to quit the installation process, choose Startup Disk from that same Utilities pull-down, and restart your iMac:)

Macbook will not power up after software updates

I got my White macbook last week.
This afternoon, I ran a software update which had 6 items including iTunes 8 and OS X updates to 10.5.5.
I left the software update running and upon my return, the Macbook had powered off and I could not power it up again.
Tried everything in the manual and finally called my reseller for an appointment.
I am very surprised that this happened.
Can anyone provide a similar experience or tell me what may have happened?
Thank you.
RJ

iTunes 8 has been known to be killing hard drives on macbooks, so i think that the problem is that your hard drive is toasted/dead. Since its only a week old apple could probably replace it for free for you, but theres a big chance all your data is lost. Also try removing the battery and putting it back in, then start it up. If it starts up but all you see is a folder w/ a question mark it means its corrupt. I would take it to the reseller or an apple genius to check it out (at the apple store)

IMac won't boot up after latest update. Any suggestions?

I just updated my software (the latest from apple), then my iMac won't boot again.

There you go. Your HDD is failing hence its not booting. You need reformat the HDD
To reformat, same steps: Boot to the install disc > get past the language selection > You will see Welcome to Blah Blah Blah > just hit continue > There should be something there called erase and install
BUT
1. if you are absolutely sure that Time machine has BACKED-UP all of your files then proceed above
2. If not, if you have another mac: connect it via firewire then google Target Disk mode. Basically you want to copy all your files from the damaged machine to the new mac to serve as a backup
3. if yo dont have another mac: get an external HDD, install Mac os X on it, boot to it then back up your files
to do this
a) Plug external HDD
b) Boot to the CD restart and hold C
c) Get past language selection and keep hitting continue
d) when it asks you where you want to install Mac os X > select the external HDD
e) once its installed. Restart the computer and hold "Option" key. You should now see your external HDD as one of the boot drives. Select that and you'll boot into it
f) once inside the external HDD OS, you will see the internal HDD(damaged drive)browse/navigate through it and start getting your important files

Safari is not opening websites after Maverick update. Any suggestions?

Recently updated to Maverick and now the Safari is not opening anything. I have a Macbook Pro 15 inch 2010. Looking for suggestions to fix the problem.

Try using another browser.
Firefox
Safari 5.0.1 or later - Slow or partial webpage loading, or webpage cannot be found
Safari Problems
Safari/Reset Safari - try a reset.

TS1702 My brand new iphone5 will not connect to my home wifi even though my ipad and old iphone do connect with no problem. What can I do?

My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?

Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
Good luck and do report back.

My brand new PB will not charge when in standby or when on

I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e. it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

TS1587 My iMac will not power on .

My iMac will not power on

Hi I have some weird problem related to this and unfortunately either or apple or APS able to solve.
I have picked a 27 iMac late 2012 model 2 montsh back and a APC Back up UPS 700.
Whenevr I turn on the Main power> Turn on APC> Turn on iMac, the iMac doesn't turn on. I will have to unplug it and plug it back it works. It happens only when I start the UPS for the first time in the day. After that how many ever times I remove my iMac plug and plug it back to APC, it turns on.
Initially I thought, it is the problem with the UPS and contacted APC where they replaced with a new UPS and its the same problem.
Unfortunately, Apple is not able to tell that its the problem with the Apple iMac as it works fine when directly powered without using APC.
So, the problem lies working with APC and iMac together.
Could someone please help. The last option I have is to carry the UPS to a Apple store and see if it works fine with any other iMac.
Also to mention, I did try SMC reset adn PRAM reset.

HT1750 I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

Don't know. Could be any number of reasons. Re-read the how to install RAM manual again for your model iMac. Double & triple check to make sure you purchased the right RAM chips. Make sure they are seated properly. If you didn't hear a snap when seated, the RAM is not properly seated.

My iMac will not power up

My iMac will not power up. It is a late 2008 21.5 inch. Any suggestions, tricks, soothsaying, or voodoo that one can apply here would be a great help. Thanks.

If it doesn't have any video and doesn't make any sounds take your 20" (not 21.5") 2008 iMac in for repair, it has suffered a hardware failure. When you say it will not power up please be more descriptive, what exactly happens when you hit the power button and what troubleshooting have you tried?

My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload and am afraid it 'crashed'

My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'

Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin.

Iphone 4s will not power on after ios 6.1 install

iphone 4s will not power on after ios 6.1 install. Help

This did not help the problem. History of problems that started 3 days ago before 6.1 update:
Problems started with the phone dropping a call I was on. Then the screen had lines across it, then screen turned solid green.
Powered off the iphone.
Happened again 4 hours later. Dropped call then garbed screen. Powered off then back on all seemed okay.
Applyed 6.1 yesterday in the morning. Phoned died completely last night. Plugged in over night and it came back up this morning.
Phone is still within 1 year warranty. Should I just have Apple replace the phone (Warranty runs out in 2 weeks)

Got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

What happens when you try to install the iTunes update? Error messages?
You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem.

My macbook pro will not start up or turn on. any suggestions?

My macbook pro will not start up or turn on. Any suggestions?

I had the same issue I bought my MacBook Pro in Jan. my harddrive was bad and they had to replace it. I know the guy held down the shift botton for a little then pressed the power botton while still holding down the shift botton and it turned on but not completely since my hard drive was bad.

Lacie Rugged external drive will not show up after Yosemite update.

Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.

I have the exact same issue. Have you had any luck with a solution?

My brand new iMac will not power up after an update restart, any suggestions?

Similar Messages

Maybe you are looking for