My Camera Raw version is not compatible with my Nikon Camera?
Hi,
I have photoshop 5.1 and I am trying to open RAW files from my NIKON D600. When I try and do this it gives me the following message...Could not complete your request because the file appears to be from a camera model which is not supported by your version of Camera Raw.
How do i update my Camera Raw plug in?
Thanks,
...or go for another non-Adobe RAW converter, your choice. The DNG converter is probably the easier if you already have it and have used it. The downside is that the converter is just that a converter into DNG with no manipulation of the RAW file via an external XMP so all the manipulation will need to be done in PS5.1, the RAW processor in the current Adobe Camera RAW is fairly advanced and much can be done outside of PS. An alternative might be to look at Lightroom instead of using PS 5.1 but the processed files (which are the unadulterated original NEF coupled with a sidecar XMP) would not be compatible with 5.1 if you want to process further in PS (as the current LR is compatible with the current PSCC).
Similar Messages
-
I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg EYou were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html -
Firfox requested to update previous version to new version of which i allowed. After installation complete i tried to connect to the internet and was denied with a following error window appearing. As explained above i shall explain again as shown in the error window.
XULRunner
Error: Platform version " is not compatible with
minVersion >= 1.9.2.16
maxVersion<= 1.9.2.16
This will not allow me to connect to the internet as i would like to continue to.
Please restore if possible my previous toolbar and able for me to connect to the internet.
Thank you.This issue can happen when the updater wasn't able to update all files in the Firefox program folder.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??
Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.
-
Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?
Try downloading and installing 6.0.2 from here:
http://www.oldversion.com/macintosh/download-Firefox-6.0.2.html
In Firefox preferences/advanced/update uncheck download and automatically install updates. Instead check ask me what to do. -
i have also tried to uninstall firefox to no avail
when i try to download 3.6.15 it works to 100% then is searching for viruses and there it stops.
i can get on the internet with firefox... but can't get to my email using thunderbird... but i was told the problem is a firefox issue.
yikes. i'm in over my head.I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
'''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
'''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
'''''It is definitely a Mozilla FF issue'''''.
Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software. -
I updated my browser to v5 and was told that it would not be compatible with Google at this time. I was not able to log onto Google nor bring up the Google toolbar and related search ability.
I have therefore switched back to v4.01 and I now can use Google. Is this new version 5 now compatible with Google or will it ever be??
Thanks BillThe Google Toolbar '''7.1.20110512W''' version works in Firefox 5.0 by using the Compatibility Reporter extension, I tried it myself due to the large number of postings about the GTB this morning. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ -
Hi...
...and thanks for reading this:
We have a Nextbook Premium8 tablet that is hardly two years old. We had to reset to original factory settings, and in doing so lost our Adobe Flash Payer app. Upon trying to re-install AFP, we received a message that our tablet wan not compatible with the latest AFP version.
Is there an earlier, archived AFP version that will work with our tablet, and if so, which version - Flash Player 11.1 for Android 4.0 (11.1.115.81) from Sept 10, 2013, possibly???
It seems almost unbelievable that our tablet should be this obsolete for use with Adobe Flash Player after such a short period of only two years.
Thank you once again,
Robert LucasIt's not you, it's us. We don't make Flash Player for Android anymore.
The last working version published for Android is missing a year and a half of security updates at this point, so I would highly recommend against running it.
The details on why Adobe dropped support for Android are here, but yeah, we haven't released an Android Flash Player since late 2012.
Adobe roadmap for the Flash runtimes | Adobe Developer Connection
There are a few alternatives that you can use to get Flash on your phone. They're mostly cloud-based web browsers, where they run Flash in the cloud and stream the content down to your phone. It works surprisingly well.
A cursory Google search for "Android Browser Flash Player" turns up these options:
http://lifehacker.com/now-browser-is-a-lightweight-browser-for-android-with-f-1548329538
Puffin Web Browser - The fastest mobile browser with Flash support over cloud on iPad, iPhone and Android.
https://play.google.com/store/apps/details?id=com.appsverse.photon&hl=en -
The latest version of itunes is not compatible with my operating system (I think). Can I download an earlier version of itunes that will work?
Welcome to the Apple Support Communities
You can use the most recent version on the device, iOS 6.0.1. See > http://support.apple.com/kb/HT4972 Then, you'll be able to update in Settings > General > Software Update -
Camera Raw 4.6 not working with D700
I have a PC with Windows XP Pro, 1 GB of RAM and Service Pack 2, Photoshop CS3 and the latest version of Camera Raw 4.6
When I open ACR, it does show that I am using Camera Raw 4.6 Beta version and it seems to work properly with my Nikon D200 NEF files.
However, when I try to see my Raw NEF files from a new Nikon D700 camera, the bridge DOES show the hi-res thumbnail images, but when I press Ctrl+R keys to open the image in ACR, absolutely nothing happens.
Now if I open Photoshop and then navigate to the exact same NEF file (that wouldn't respond to be opened in ACR,) it WILL open in ACR using the very same Camera Raw 4.6.
Any comments?
Thank you,
Monte EvansCan you tell me why my computer at my studio sees my D700 NEF files and it "only" has Camera Raw 4.5? The Nikon D700 is not listed as a camera that is supported on this version. I had to update my home computer to 4.6 to make it work. (or maybe I should have tried purging the cache on that computer before trying the Beta version 4.6). Looking back, my studio computer should not be able to see these NEF files.
Monte -
Hello i need help, i unloaded the new version of whatsapp and now is not working because my phone is not compatible, i delete it, and now i can not unloaded it again ! how can i unload the old version again ? thanks
If you did not make a backup of the old version of the app before you deleted it, there's no way you can get it back now. The current version should still work on your iPhone 3GS, though. You just need iOS 4.3 or later, so if your iPhone still has an older version, update to the latest iOS.
If, however, you really have an iPhone 3G, not a 3GS, then unless again you make a backup copy of the old version of the app, there's nothing you can do until you're ready to get a newer iPhone since iOS 4.2.1 is the final version your iPhone 3G will run.
This question, by the way, would have better been posted in the Using iPhone forum rather than here in the QuickTime forum.
Regards. -
I originally had Firefox 3.6 and my Speedlings program was working fine with it. Then I updated to 4.0 and Speedlings is not functioning properly. I called Speedlings and they said to use the Firefox 3.6 version and I would be fine.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
My HP laptop has a digital signature for accessing my pages such as email, facebook, etc. Since I updated firefox, this is no longer compatible and does not work. It is very painful, I really want and need to use it. Does this mean I need to downgrade to the previous version of firefox?
EgisTec, who now provide the HP Simplepass application, have made an update of the scanner software for Firefox 4, for details see https://support.mozilla.com/questions/814397
-
Camera's RTSP Function not compatible with most phones.
Aside from the usual array of phones that don't support rtsp which cannot access linksys cams... add the new enV3 which can stream m.youtube.com and has rtsp but are still unable to load the stream. If someone would like to prove me wrong I'll paypal them 20 bucks... drop in the bucket compared to how much money ive spent just to try and check up on my cat while I'm on the road! I guarantee it's not my network because I can remotely view the rtsp over VLC and my sister's blackberry works sporadically.
I repeat... do not consider RTSP a selling point on the linksys cameras... the technology is too new and just doesn't seem to be tested on... REAL PHONES or REAL NETWORKS???!??
Edit: Every verizon phone I've seen tested for linksys cams are now discontinued!
Message Edited by sloth on 10-11-2009 06:35 PM
Solved!
Go to Solution.Back from a fresh visit to a Verizon factory store and had a chance to test my network on the enV Touch which is the successor to the Voyager (I repeat... a discontinued phone!). I have a valid complaint with both Verizon and Linksys for this reason... Their sales and tech all insisted the enV3 had mobile web parity with the touch, being a good consumer I automatically don't believe them and get a second opinion on this forum (which insisted m.youtube.com meant automatic compatibility {that turned out to be false as well} even though it really is just a coincidence). So again, there seems to be no way of checking compatibility without testing the phone physically (which in my opinion should be handled by linksys). If someone with the power to write some firmware knows how to increase the compatibility of the rtsp feed with more mobile browsers it might be a good idea if theyre going to keep this product line alive! Youtube rtsp working and linksys rtsp not working on one of the most popular new verizon web phones just seems like a maximum gain firmware fix opportunity. Home Server I appreciate the help and getting the information out there I just want to make sure more people don't fall into a dissapointed state over an otherwise improving company (I love the new line of routers linksys!)
-
I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.
Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376
Maybe you are looking for
-
Reading one character at a time
Hello How can i read one character at a time from standard input (System.in) ? I have tried to use ir=new InputStreamReader(System.in) ir.read(). But this method blocks until it gets a return key pressed before going forward Any other solution?
-
This seems to have appeared with the 10.7.4 update (from Combo), but it can be shear coincidence. I'm facing a problem with mySQL, and I'm not sure what's involved as some other issues are cropping and I don't know what's the basic issue that's trigg
-
All, How to trace back gorund user?
-
How to start Rescue and Recovery?
How do you start Rescue and Recovery? I used to just press the Lenovo Care button and it came up. But now... there is a Startup Interrupt Menu. When the computer already booted, it won't allow me to start the thing up. All it says is that changing it
-
CUVA with Windows 7 64 bits or MAC
Hi, can i use CUVA with Windows 7 64bits or MAC ?, wich version? thanks in advance Cesar