My channel level meters are responding slow any ideas?

In logic my channel meters use to respond quick and perfectly with the input. Now the meters are lagging and responding super slow or just acting frozen in the off position.
This is terrible and I have no idea what happened.
It has work seemless for 2 years.
The only I did was install an update for the novation nocturn and it recaned my plugins. I cleared my logiclogin.plist but it hasn't help.
Any ideas to make the channel meters work?
thanks

Are all sites slow to load, or only some? If only some, give an example.

Similar Messages

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps are responding. Any ideas?

My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas? If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,, Thanks!

For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
For other Disk repair remedies see
http://support.apple.com/kb/TS1417
Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

My ipod 5th gen had an error message so I started again but now the controls are really slow - any ideas?

My ipod 5th gen gave a error message to restore which i have done twice. Now the unit controls especially play/pause/stop seem really slow, as is it trying to get to the movies. Any ideas please.

Connect the iOS device to your computer and try to make a backup. Yo shld be able to make a backup if you previously syncing to this computer.
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

TS1702 I have 8 apps that when I tried to update, are now stuck on "installing" in the box that says update. every time I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ide

I have 8 apps that, when I tried to update, are now stuck on "installing" in the box that says update. every time I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ideas?

Reset your iPad by holding the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears. Then update your apps one at a time. Do not start the next app until the current one downloads and finishes installing.

Whilst working on iMovie my screen has frozen. Cannot use any menus or dock icons. Tried turning off but asks am I sure. If I press shut down button it doesn't respond. Any ideas?

Cannot use any menus or dock icons. Tried turning off computer but message appeared asking 'am I sure'. If I press shut down button it doesn't respond. Any ideas? I was dropping multiple clips into my movie/project when it happened. It has been frozen for over an hour now. I can't hear the driving doing any work.

Thanks a lot. I had previously held the power button down and up popped the 'are you sure' message whhich provided a shut down button to press but it didn't work. Thanks for you help. I'll have a look in iMovie now to see if I've got any corrupted files. Thanks a lot
Kind regards
Derek White

My mac OSX lion is now very slow, any idea why?

my mac OSX lion is now very slow, any idea why?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

My camera is frozen, shutter won't respond. Any idea?

Camera on my iPhone is frozen, the shutter won't respond. Any idea?

iPhone 4, iOS 5.0.1
I've been an iOS app developer since 2008 and a mac developer before that. It's not a memory issue, nor a crash (no crash files).
It's doesn't matter how many apps are running. could be 25 apps or just the camera. Rebooting, hard resets and iOS restores have not fixed the issue. Nor has turning on and off location services.
If I am on WiFi the camrea shutter will not open. Close the app (as in really closing the app), go into settings and switch off WiFi and all is good.
I was just suggesting that may be something you want to try as it's my particular problem.

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My iPod says "cannot be synced. The required file cannot be found. Always when half way through a sync. It also shows apple logo when I try to access photos and I think the issues are linked. Any ideas?

My iPod says "cannot be synced. The required file cannot be found" it also defaults to apple logo when I try to access photos. I think the issues are linked. Any ides?

So you have tried removing/trashing your iPod's photo cache? See here for more information on where to find this file.
iTunes: Understanding the iPod Photo Cache folder
B-rock

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Adobe Acrobat Standard 9.5 Install Error: "Error applying transforms please ensure specified transform paths are valid". Any ideas on how to fix this?

I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?

Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

HT1277 Somehow entries in my address book are doubling. Any ideas?

Somehow entries in my address book are doubling. Any ideas?

do the emails show in your sent items?

HT4528 I was in a pub in Scotland & used their wi-fi. An update offer that looked legit came up & I did it. Took several minutes, everything seems to be working OK except all my contacts are gone. Any ideas?

I was in a pub in Scotland & used their wi-fi. An update offer that looked legit popped up & I ran it. Took several minutes, rebooted & all seemed fine except all my contacts are gone. Any ideas?

Thanks,
I'll give those drivers a try the next time I install Windows 8. However I still don't understand how they would be any different to what is included in Boot Camp Assistant that came with Mountain Lion. Can you or anyone else confirm that they are different?
Can you also confirm that you have the Bluetooth radios in Device Manager and that you can discover Bluetooth devices under Windows.
Last question - do you run more than 1 partition in Windows?

Hi All, My iMovie opens and few secs later gets stuck! Not Responding! Any idea?

Hi All,
My iMovie opens and few secs later gets stuck! Not Responding!
Any idea? All up to date, OS X, MacBookAir...

Check memory and disk space (use Activity Monitor), and please report back. Also try closing all other apps.
What version of iMovie and OS X?

My channel level meters are responding slow any ideas?

Similar Messages

Maybe you are looking for