My charging port on iPhone 4S is really dirty from previous owner. It's more than dust. It's affected the charging to where it won't charge anymore. How can I safely clean this out? Or will I have to go get it cleaned or something by apple? Thanks.

I bought my iPhone 4S from a friend and noticed right away that inside the charging port it's really dirty. It didn't affect anything so I didn't think much of it. Now though, it is not allowing my phone to charge at all. I've tried multiple chargers, adapters, and wall plug-ins and it doesn't change. It still won't charge. I'm not sure as to go about cleaning it. I don't want to scratch the part that connects to the charger. So how would I clean it, and would I need to just go to apple and let them deal with it?
Thanks.

Are you sure it is not corrosion/rust from moisture damage?

Similar Messages

  • HT2305 I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unloc

    I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.

    Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.

  • When I updated to OS 5.0 my old apple id which was not an e-mail address won't work anymore, how can I fix this?

    When I updated to OS 5.0 my old apple id which was not an e-mail address won't work anymore, how can I fix this?

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

  • My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

    My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

    i Had a simular issue years ago with my blackberry on ATT.  As it turned out, my SIM had some issues.  I would head over to your carrier and get a free sim replacement.   It could be a phone or SW issue, but the Sim is my first guess give my experience

  • In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password.  How can I turn this off, and still be safe?

    Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password.  Keychain wants it, Safari wants it, iCloud wants it..the list goes on.  Then in 10 minutes or so, they all want it again.  Passwords are being stored by Safari as usual, but new tabs or pages bring up the request.  How can I turn this off and still have protection?

    Tutorial: Resolving Keychain Issues
    If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
    First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
      1. Open Keychain Access (located in Applications/Utilities)
      2. Go to the "Keychain Access" menu and select "Preferences"
      3. Click the "First Aid" tab
      4. Make sure the "Synchronize login keychain password" box is checked
      5. Close the Preferences window
      6. Go to the "Keychain Access" menu and select "Keychain First Aid"
      7. Enter your username and password
      8. Click the "Repair" button
    The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
      1. Launch Keychain Access (located in Applications/Utilities)
      2. Click "Show Keychains" in the lower-left corner of the window.
      3. Select the problematic keychain from the left-hand pane.
      4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
      5. Check all options for deletion and press "OK"
      6. Create a new keychain by going to the "File" menu, then "New" and selecting
          "New Keychain"
      7. You can now make this keychain your default if you desire by selecting it, then
          going to the "File" menu and selecting "Make '(name of keychain)' Default"
    Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
    First, you want to enable the root user:
      1. OS X Mountain Lion: Enable and disable the root user
      2. OS X Lion: Enable and disable the root user
      3. Mac OS X 10.6: Enabling the root user
      4. Enabling and using the "root" user in Mac OS X
    After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
    Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
    Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
    Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
    Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
    The above comes from an article published on MacFixit.com.

  • The display on my nano does not rotate anymore-how can i fix this?

    My Nano 6th generation stopped rotating the display. How can I fix this?

    The display on the 6G Nano does not rotate automatically.  It has to be done manually.  Place 2 fingers on the display in a pinch-like manner and rotate them either clockwise or counterclockwise.
    B-rock

  • HT1296 itunes no longer sees my i phone 4s? the computer sees it as a device with memory, how can i fix/change this?

    Itunes no longer sees my iphone 4s as a device? What can i do?

    Just to clarify:
    Does Aperture not see the drive at all (that is, does Aperture also not see the drive in the import and export dialogue) or are only the Master Files disconnected?
    If Aperture does not recognize the drive at all, check the permission settings of the drive in the "Get Info" panel and make sure you have read/write access, also the "Ignore ownership on this volumn" checkmark, this should be set.
    If correcting the permissions does not help, make sure you have a backup, and then use "Disk Utility" to run a check and to repair the volumn, if necessary.
    If Aperture can see the drive on import and export, but only does not see the master image files, then try to reconnect your masters.
    Create a smart album or use a Search with the rule: "File status: offline", to select all images that need reconnecting to their masters.
    Right click on the first image of the selection.
    From the Pop-up window select "Locate referenced Files..."
    Now the "Reconnect All" button should appear.
    Click it.

  • I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

  • My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

    my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • HT1420 How can I see a list of which computers I have authorized?

    How can I see a list of which computers I have authorized? 

    List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

  • 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

    Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
    Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

    Exactly the same problem with me.
    Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
    What I did not try yet, was to move the Render files out of the malicious library to trash.

  • HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

    After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

    Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
    I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
    You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
    Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
    I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

  • My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. Help please

    My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. I tried plugging it into the wall, a computer, I even switched out the USB cables but it still wouldn't charge. Help me please

    Hello Isabellap,
    It sounds like your iPhone 4S is not charging when plugged in.  I found an article with some steps that might help with this.  I recommend reviewing the steps in the sections titled "Battery does not charge from the USB power adapter" and "Will not turn on, will not turn on unless connected to power, or unexpected power off" in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • HT204053 I want to be able to setup a generic corporate Apple ID to use with icloud and Find my Iphone, that will allow me to have more than 10 devices assigned to the ID. What do I do?

    I want to be able to setup a generic corporate Apple ID to use with iCloud and Find my iPhone, that will allow me to have more than 10 devices assigned to the ID. How do I go about creating this account?

    I'm not sure if I understand your question, but if you create a new iCloud account with a different ID your existing ID isn't effected by this.  It will continue to work as it does now, you will just have an additional Apple ID.  If you have an earthlink email address you can continue to use it as a separate account, and it can continue to be your default account if you set it to be (in Settings>Mail,Contacts,Calendars>Default Account).  If I'm misunderstanding your question, please explain further.

Maybe you are looking for