My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Similar Messages

  • HT1688 i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??

    i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??

    Then the SIM may have failed. Try removing and re-inserting it. If that doesn't fix it, you will have to get the SIM replaced by your carrier.

  • I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

    What I recommend you try doing first is to turn iMessage off then back on.  If that doesn't work, make sure that your Apple ID and password are correct.  If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
    Hope this helps!

  • HT5538 Hubby's phone has switched itself off and won't switch back on. It has been charged but nothing works.

    Hubby's phone has switched itself off and won't switch back on. As far as we know it's fully charged, can't check as got a blank screen but does buzz when charger is plugged in. Has been left on charge for quite some time. As you will gather, I am sending this on his behalf.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • My iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

    my iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • My iMac20 powers off by itself and won't switch back on

    I'm sorry this is a bit of a saga but I'm at the end of my tether with so will be really grateful if anyone has any experience of this issue and can give me some help?
    The problem started in May when, after an hour or so of use, my iMac 20 suddenly started to turn itself off and wouldn't turn back on again until the following day. This happened around half a dozen times so I took the machine to the local Apple store and was told that it was probably the thermal trip and if I removed the power cord and left it disconnected for a while, it would power up again more quickly. That evening when it cut out, I followed the advice I was given and removed the power cord from the back of the machine but it made no difference and the machine would not restart until the following morning. Back to the Apple store I went and this time they took the machine in to the workshop; a day or two later I was told that they had cleaned out the fans and tweaked some software and had run it successfully on the bench for several hours with no problem. After paying £49, I collected the machine, took it home, ran it for an hour or so and off it went again and as before, refused to turn on. Back again to the Apple store; "Had I reloaded the operating system?" Well no, because I hadn't been told that I needed to. And anyway why would I... surely the thermal cut-out was a hardware issue? The response was that the problem was definitely software-based and nothing to do with overheating or a faulty power supply unit (which was/is my favourite candidate for villain of the piece). So off home I went, backed up my stuff and ran Disc One successfully and started running Disc Two. After about 20 minutes into Disc Two the machine did its usual trick and powered off, and I went looking for a bottle of wine.
    Back to the Apple store. The guy controlling the 'guest list' for the Genius Bar said that if I wanted to return the machine to the workshop that day it would be considered a new incident and there would be a further charge for any repair work. However, if I made a fresh appointment (for a couple of days later) then the work would be done as part of the previous 'repair'. Somebody at Apple really needs to look at the way the stores deal with dissatisfied customers.
    So, Saturday the 11th of July arrives and I head back to the Genius Bar for my free appointment. I explained to a very helpful guy that this is my fifth visit and I would like to get to the bottom of the problem. He referred to the tech person who dealt with the original workshop repair and she came out to explain that the issue is caused by 'something' lurking in my Library folder and that if I wipe my hard drive and re-install the OS from scratch but without the Library folder, the problem should be solved.
    I spent Sunday wiping the hard drive, running the OS discs and then reinstating my iTunes, photos etc and waiting for the machine to turn itself off - but it didn't! I left my external hard drive returning all my files and documents overnight and when I woke up on Monday, everything was still up and running... bliss!
    Then, this afternoon, after downing loading a music file in flac format, I found that it wouldn't go into iTunes without the help of Fluke software. I downloaded the Fluke stuff and then as I dragged the flac file into iTunes - boof! The machine went off and won't switch back on again.
    So finally... has anyone seen any similar behaviour with their iMac and was it caused by software or hardware? And if it is software that's causing the problem, why can't I switch the machine on again immediately?
    ,

    Amsys plc, the company Apple uses for off-site repairs returned my iMac20 today and the accompanying advice note states that the fault was resolved by replacing the power supply unit. I am really grateful to Apple for finally getting to the bottom of the problem, particularly as the repair was done free of charge, although I had already paid £49 for a useless workshop investigation at the Kingston store. The service given by Amsys was exemplary... the collection and return of the machine was carried out at the times promised and whenever I contacted the company by phone, each person I spoke to seemed to have knowledge of the repair without having to refer to the case notes (and none of the 'press 1 for service, 2 for sales...' rubbish).
    So once again BDAqua, many thanks for suggesting I call Apple... it's just a shame that the staff of the Kingston store refused to accept what was obvious to me.

  • Video clips won't play back after capture

    I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

    It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
    Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
    I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
    I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

  • How do I switch from headphones back to regular volume if I use my headphones I have trouble with regular communication the phone rings but I cannot hear the speaker

    HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate

    Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting

  • My iphone4 seems to have switched off even tho there was 30% battery charge left.  It won't switch back on.  I've only had it on charge for about 10mins so far.  Any ideas?

    My iphone4 suddenly went blank even tho it had showed about 30% battery left.  I won't switch back on.  I've only had it on charge for about 15 mins so far.  Any ideas?

    Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

  • I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pa

    I uninstalled Norton 360 under windows xp and now I'm getting this problem that firefox will no longer load pages. IE and Outlook still work and I can access the internet with them, I can ping any website I like successfully but Firefox won't load any pages ... N
    == This happened ==
    Every time Firefox opened
    == I uninstalled Norton 360 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727; Media Center PC 4.0; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; InfoPath.2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    I found a fix for this, not only firefox but several other networking programs were broken as well (Outlook and IE were ok for some reason) so I reasoned that the Norton uninstall was incomplete somehow - I had done it from the add/remove programs in the control panel. Sure enough that's not enough to release Norton's tentacles in your system, there's an uninstall tool on their website (a whole set of them actually) that managed to carve it out completely and after a restart everything was back to normal. My machines will definitely be Norton-free from now on ... N

  • My mini ipod won't switch on or charge

    My mini ipod won't switch on or charge. I have tried charging it several ways - via the pc, plug and incar charger but no luck. The pc does not recognise the ipod. I have tried toggling the hold switch. The usb ports on the pc are ok.
    The last thing that I did with the ipod was detached from the pc when it had the message to do not disconnect.
    Can anyone help
    thanks
    Anne-Marie

    See these.
    iPod shows a folder icon with exclamation point when you turn it on.
    iPod won't turn on.
    iPod battery doesn't charge.
    Your Windows PC doesn't recognize the iPod is connected.
    iPod only shows an Apple logo and doesn't start up.
    Putting iPod into disk mode.
    Restoring using disk mode is often the key.

  • Iphone won't switch back on - can anyone help?

    Hi, have an iphone 3G - was working fine, but forze earlier today and I ended up switching it off and now it won't switch back on again.  I've tried home and power buttons - the silver apple logo comes up, then nothing, goes to blank screen again Have also tried to get onto iTunes to see if device is found - no luck.  It's not being found when I plug in to charge - screen just blank.
    can anybody help?

    An iPhone has to have the battery charged to some degree for a Reset to work. If after charging the iPhone a bit, try the Reset. If the Reset does not work, then you could try the mentioned Recovery Mode Restore. But even for a Restore to work, an iPhone needs to have the battery charged some first. If the Recovery Mode Restore does not work you could try a DFU Mode Restore.

  • My iPhone 4 keeps shutting down and won't switch back on unless I plug it into charger. It's then coming hop iOS 6 and connect to iTunes?

    My iPhone 4 keeps shutting down and won't switch back on unless I plug it into charger. It's then coming hop iOS 6 and connect to iTunes?

    Yes I've connected it to iTunes.. Reset the phone completely and synced phone again. It's also turned off twice today and when it comes back on its saying searching in the top left corner were your signal and network carrier should be?

  • HT201412 My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??

    My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??

    Sounds like a dead battery.  Try plugging it into a charger.

  • Before starting fire fox I can use the mouse to highlight my desk top icons. After ffox is loaded the mouse will point to the icons but will no longer high light them. When I click it just opens the icon.

    # Question
    before starting fire fox I can use the mouse to highlight my desk top icons. After ffox is loaded the mouse will point to the icons but will no longer high light them. When I click it just opens the icon.

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

Maybe you are looking for