My computer can not detect a camera on my iphone 4S

When I connect my phone to my computer, it says it can not detect a camera and I can't download my pictures/videos. How can I fix this?

gdgmacguy asked for the OS your computer is running, why exactly did you think anyone wanted to know the version of iTunes on the computer?
Seems like there may be a user issue here. Try replacing the user, see if that resolves the problem.

Similar Messages

Why JMF can not detect web cam in my net beans IDE?

Hi All,
I am newbie to JMF.
Install JMF in my window 7 system.
JMF can not detact webcam in netbeans IDE 6.8.
But JMStudio is detact available my camera.
CaptureDeviceManager.getDeviceList(null) is return null value.
how to over come this issue...

You probably didn't add JMF.jar to your project library folder.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

After I updated to iOS 5, my computer does not detect my iPhone 4. Not only that, all my backed up data was erased. =/ I cannot even sync my iPhone if it is not detected. What can I do?

After I updated to iOS 5, my computer does not detect my iPhone 4. Not only that, all my backed up data was erased. =/ I cannot even sync my iPhone if it is not detected. What can I do? The USB ports are working. It is fully charged. I have restarted the phone and computer various times. But nothing works.

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

My Computer Doesn't Detect My Camera

My computer doesn't detect my camera! Can someone help? (If you haven't noticed, I created this account just to ask this question! Help is greatly appreciated!)
I recently had to do a system restore on my computer. After I restored, I tried to upload photos from my Powershot A4000 IS camera to my computer (I had done it before successfully) only to find that the Autoplay window didn't pop up (like it usually did) and the Hardware Fail sound played. I then tried to start my CameraWindow software manually, but it said my camera wasn't connected. I have several Usb ports on my computer, and I tried all of them. Nothing happened! I'm sure that I'm not missing any essential Canon software and my camera isn't damaged; I barely use it, and the Powershot A4000 support page claimed that I didn't need any extra drivers for my edition of Windows! Help!
P.S. My OS is Windows Vista SP2.

Stupid_Computer,
There are some additional questions I would like to ask that will help me determine what is wrong.
1. Have you tried connecting your camera to a different computer?
2. Do other computers fail to recognize the camera?
3. Do you have any other devices connected to the computer, like a printer, scanner, webcam, external hard drive, etc?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Zen Touch... just installed it, but my computer can't detect

I'm sure I've put it in the right place (heh, I'm not exactly a computer genius to put it lightly) but my computer can't detect it.
Please, pleeease help me... I've only just got it and really want to use it.
Thanks

Did you plug the player into the computer before installing the software that came on the CD? If so that might be the problem...

HP desktop computer can not play Blu-ray DVDs. Who is responsible for this?

In 2010, I blought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. All these years, I've been successfully playing regular DVDs and CDs. Until now, I have not attempted to play a Blu-ray DVD.
I recently rented the "Divergent" Blu-ray DVD (as well as the "Divergent" regular DVD) from my local library. When I tried to play the Blu-ray DVD, the HP MediaSmart software and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
I then downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html    This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work. When I got rid of the Codec Pack using System Restore, HP MediaSmart and Windows Media Player became unable to detect the Blu-ray in the Blu-ray drive. After another System Restore, HP MediaSmart and Windows Media Player were once again able to detect the Blu-ray (but were still unable to play the Blu-ray).
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing. I then got rid of Cyberlink PowerDVD 14 with a System Restore.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not detect the Blu-ray. I then got rid of TotalMedia Theatre with a System Restore. After that, I was not able to play ANYTHING, including CDs and regular DVDs. CDs and regular DVDs were not being detected by playing software. After another System Restore, I was once again able to play CDs and regular DVDs. However, I do not want to risk trying to play the Blu-ray again.
So, what's going on here? HP advertised this computer as having a Blu-ray DVD player. Wasn't HP responsible for providing software that could play Blu-ray DVDs? And why is the Blu-ray DVD, sometimes detected, and sometimes not detected, by playing software? Is there some kind of hardware issue?
Who is responsible for the fact that my computer can not play Blu-ray DVDs? HP, for bad playing software and/or bad hardware? Or is there something in the Windows 7 operating system that prevents the playing of Blu-ray DVDs? Is Microsoft responsible?
Thanks for any information.

Talon820 wrote:
In 2010, I blought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. All these years, I've been successfully playing regular DVDs and CDs. Until now, I have not attempted to play a Blu-ray DVD.
I recently rented the "Divergent" Blu-ray DVD (as well as the "Divergent" regular DVD) from my local library. When I tried to play the Blu-ray DVD, the HP MediaSmart software and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
I then downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html    This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work. When I got rid of the Codec Pack using System Restore, HP MediaSmart and Windows Media Player became unable to detect the Blu-ray in the Blu-ray drive. After another System Restore, HP MediaSmart and Windows Media Player were once again able to detect the Blu-ray (but were still unable to play the Blu-ray).
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing. I then got rid of Cyberlink PowerDVD 14 with a System Restore.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not detect the Blu-ray. I then got rid of TotalMedia Theatre with a System Restore. After that, I was not able to play ANYTHING, including CDs and regular DVDs. CDs and regular DVDs were not being detected by playing software. After another System Restore, I was once again able to play CDs and regular DVDs. However, I do not want to risk trying to play the Blu-ray again.
So, what's going on here? HP advertised this computer as having a Blu-ray DVD player. Wasn't HP responsible for providing software that could play Blu-ray DVDs? And why is the Blu-ray DVD, sometimes detected, and sometimes not detected, by playing software? Is there some kind of hardware issue?
Who is responsible for the fact that my computer can not play Blu-ray DVDs? HP, for bad playing software and/or bad hardware? Or is there something in the Windows 7 operating system that prevents the playing of Blu-ray DVDs? Is Microsoft responsible?
Thanks for any information.
You're not going to get any help from HP or Microsoft on a 4 year old computer.   Maybe your optical drive is no longer able to play Bluray discs. Windows 7 Media Center with Bluray playback was not included in all versions of Windows 7. Each computer with Bluray has an individual license; yours may have expired after not using it for 4 years. Best advice - don't flog a dead horse. Just get regular DVDs.

Computer can't detect airport

Hi, I'm trying to install an old airport express on someone else's computer but the computer can't detect the born

The modem will connect to the first device that it sees, so this tells us that the modem has associated with, and will remember your computer.
When you connect the AirPort to the modem, the modem still looks for your computer, but cannot find it, so it refuses to issue an IP address to the AirPort since it has not associated with the AirPort.
So, you need to make the modem "forget" your computer. You do that by pushing the reset button on the modem....if present...and then powering off the modem completely for at least 30 minutes. Longer is better. Pull the power supply from the back of the modem or unplug from the wall.
Power off the AirPort Express as well
After the power down period, power up the modem and let it run for 10-15 minutes by itself.
Then, power up the AirPort Express and let it run for 5-10 minutes.
If the Apple Store configured the AirPort correctly, you will have an Internet connection now. If not, then we have to go back to square one and completely reset the AirPort and modem again.

My i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens. What should I do?

my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
What should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

My computer can't detect iPhone and the iPhone is malfunctioned

i have iPhone 3G ver 3.1.3
after i install a software (i forget the name), the iPhone is malfunctioned.
my computer can't detect the iPhone.
i try to reject it over and over.
but my computer still can't detect it.
and on iPhone screen, there is a picture of USB and iTunes.
i try to restart the iPhone but nothing's change.
please help me
what should i do

exoso wrote:
i've tried all of your suggestion and all is well.
but still my iPhone can't be detected by my computer
the problem is, my Windows can't detect the iPhone.
there's always a pop-up ballon that says "USB Device Not Recognized"
and my iPhone shows a picture that i have to connect USB to iTunes.
i tried to restart the iPhone too, but i still can't use my iPhone.
I'm very depressed right now.
Were are you able to *Verify iPhone Driver/Service Installation*, as mentioned in the article I linked above?
Try restarting the Apple Mobile Device Service, as shown here: http://support.apple.com/kb/ts1567.
Also, what security software is running on the PC? If you haven't already, try to update, reconfigure, or uninstall it while testing. This article: http://support.apple.com/kb/TS3125 provides additional tips that will help rule out security software issues.
-Jason

"computer can not initiate a multi-person video chat" ?

2 of us have MacBook Pros, third guy has new MacBook.
Our MacBook's have OS X 10.5.8,
The new MacBook has OS 10.6.1.
Me and the other person can iChat with 3 other ppl,
but when we added the new guy as a buddy, neither one of us could get him to come up.
He said When the call came in, two (2) video screens popped up and if he hit accept on
either one, it would decline on our end. (this happened no matter which MacBook Pro initiated the convo)
We then had the MacBook try to initiate the 3 way and it came up with an error that said
"computer can not initiate a multi-person video chat"
I've never even heard of that.
Is this a glitch, or a setting that needs to be changed?
Seems weird that the older models do it fine, but the new one is not configured right, but maybe we're missing something.
thx

Hi,
Welcome to the  Discussions
You are saying that, no matter who Hosts, when they invite the 10.6.1 Buddy he gets two Invite windows ?
This sounds like he is connected to the Internet twice.
On Sending the Visible Invite iChat does not check the validity of the Return Message.
You can be logged in twice for Text Chatting so it is not an uncommon state to exist.
However in most cases this is either two apps or two computers.
When iChat gets past the Visible Invite stage as only one reply get returned for the Acceptance it moves into sending a SIP invite separately on a different port and part of this Process is to confirm where the Visible Invite went to is where the SIP return data is coming from.
If there are two connections to the Internet at his end (and there are several causes) you will get an Error 7 showing when the Video chat is ended by all parties.
Error 7 = Remote IP Invalid
The Message you are getting may point to another problem and that is he is not on an Internet connection fast enough to join a 3 or 4 way Video chat.
He needs to have at least 384 kbps as an Upload and not capping the iChat Bandwidth below the 500kbps mark. (iChat Preferences > Video Section > Bandwidth Limit drop down)
9:17 PM Friday; January 29, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

Guys I really need your advice please...
I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
Thanks in advance.
ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

My computer can not detect a camera on my iphone 4S

Similar Messages

Maybe you are looking for