My computer cannot install windows 7 using boot comp

hi
my computer macbook pro cannot install windows 7 using bootcomp

You really have not given any details.
Windows is easy to install, if you read and follow the instructions.

Similar Messages

I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
Re: can i install windows for pc on my mac or do i need the windows for mac?

There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

HT4818 What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp

Go into your system preferences and click the startup disk icon then select your Mac HD.

HT201612 I was trying to install windows using boot amp but now I can't boot my MaOckbook pro again

I was trying to install windows using boot amp but now I can't boot my MacBook pro again

Go to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again.

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

What DVDs are this ?
If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
Boot Camp 3.0, Mac OS X 10.6 FAQ
Frequently asked questions about Lion and Boot Camp 4.0
Stefan

Installed Windows using boot camp but lost my mac disc mid setup!

I am on a Macbook Pro running Snow Leopard and used Boot Camp 3.0.4 to try and get Windows 7 on it. I partitioned the hard drive and successfully installed Windows 7 on my comp using my Windows 7 CD. However, being the overeager moron that I am, I did so without ensuring that I have a Snow Leopard CD. So now I am stuck in Windows. Anybody got any solutions for a dumb man?

you are not stuck.
the default OS is set to the Windows volume
hold down x on startup
or hold down option key after the chime sound and wait for the startup selector
when you get to OS X then go to Startup Disk control in system preferences

Why can't I start Mac after installing Windows using boot camp???

I'm new to Mac.... Have installed Windows 7 through Bootcamp... Well, I tried to at least!! I can now only get into Windows every time I start the mac up.... What have I done wrong - and how do I fix it!?!

Flying kiwis wrote:
Thanks Vinmar.... I can't see anything down on the bottom fit of my screen, apart from the time, date, connectivity, speaker volume etc. am I looking in the wrong place??
The restart in Mac OS X icon (a grey diamond) will only appear after you've installed the Boot Camp drivers. If you installed the drivers, try clicking on the sideways triangle to show any hidden system tray icons. You can also use the boot camp control panel to restart in Mac OS X.
For how many partitions you have, you should be able to see those in the Disk Utility application in Mac OS X or the Disk Management app in Windows. Be careful not to delete any of them. If you want to remove a partition, I'd use the Boot Camp Utility to do that. Nore as well that OS X 10.7 and above add a hidden recovery partition to your drive that you won't see in Disk Utility but will see in the Windows app.
Hope this helps.
Cheers,
Vinmar

Problem to install Windows using Boot Camp 3.0.4 in Macbook Air (2008)

Hi Folks!
Please I need help.
I have a original Macbook Air of 2008 (http://support.apple.com/kb/SP8?viewlocale=pt_BR) with the Mac OS Snow Leopard 10.6.8 and I want to install the Windows 7 Professional x64 as a secondary partition using the BootCamp 3.0.4. After steps necessary for create a new partition with the BootCamp, I rebooted the machine with the "Windows 7 Professional installation DVD" in DVD device, but then the setup Windows installation does not appears, showing the initialization white screen of the Mac OS with the apple image, a symbol of emptiness and a folder with a "?" symbol within alternating infinitely and do not finish.
I tried with the Windows Ultimate Vista x86, but occurs the same.
Please, what can I do to install the Windows in my Macbook Air?
Thanks a lot!
Regards,
Jonas Presse

No, I did not get a solve. Actually, my problem worsened. I tried it again, but this time the computer wouldn´t detect my alu keyboard, hence I couldn´t select a drive to tell the bloody thing where to boot from. That is weird, because at the time I opened this thread it did work. I actually had to borrow a wired keyboard so I could hit alt and get it to work.
At the moment I am not so keen on trying it again......

Cannot install windows on my MBPR

I use MACBOOK PRO (RETINA, 15-INCH, LATE 2013), OS X Mavericks (10.9)
I tried to install windows using Boot Camp Assistant. First, i tried to install windows 8.1 but it failed. I tried installing it again but it said that my mbrp only support windows 7 (which is absurd because my roommate uses earlier mbp and he can install windows 8.1). Then, i gave installing windows 8.1 and tried installing windows 7 and it failed again saying something about software update. I checked that i have already updated OS X to the latest update and tried installing windows 7 but it failed again. Any solution? Thank you.

It said "Can't install the software because it is not currently available from the Software Update server".

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

Cannot install Windows 8.1 via Boot Camp on MBPr 13" Early 2013; tried almost everything.

Hi guys,
yesterday, I decided to install Windows 8.1 on my Mac using Boot Camp. I tried to install it, but the first attempt ended into booting to the screen, where it says "Cannot find any bootable device" or something like that. So I googled it up and then tried the EFI Boot. The EFI Boot booted into the Windows installation properly, but I cannot choose the partition I want to install it on. I tried partitioning it in Disk Utility using Tuxera to NTFS, I tried formatting it in the installation itself, always restarted between the processes, I tried to delete the partition and create a new one in the installation, but no luck. I am still stuck on the error "Cannot install Windows on MBR partition. Please, choose a GPT partition". I have a 256GB SSD disk. I browsed the problems and solutions for 3 hours, but no luck. None of the solution helps. The only solution that would work I guess is if I don’t boot into EFI, but into the BIOS installation. But when I do that, I get the "Cannot find any bootable device", so a dead end here. I also tried the tips where they say to remove the USB stick when the Windows installation starts, but didn’t help either.
I am installing using a bootable USB drive, I do not have a Superdrive and cannot even lend it or something like that.
I am really desperate, can anyone please help me?
Thanks in advance,
DavidKop_

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

Cannot Install Windows 7 with AHCI mode

Hello,
Having just submitted a support ticket to MSI, I was curious to see if anyone else has experienced a similar issue or may be able to suggest a possible resolution.
I recently purchased a MSI Z87-G41 PC Mate for an htpc build.
I've ran into an issue of not being able to install Windows 7 Ultimate 64 bit onto my ANY SATA 3 hard drive with SATA mode - AHCI enabled in bios.
Main parts for the build are:
Motherboard: MSI Z87-G41 PC Mate
CPU: Intel Core i3-4130 3.4 3 FCLGA 1150
RAM: G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
PSU: Corsair Builder Series CX 600
OS HD: Crucial M500 SSD
During Windows install and selecting the SSD in which to install windows onto..
Windows will prompt with: “Windows cannot be installed to Disk x Partition x. (Show details)
Afterwards, I’ll select ‘Load driver’ and select the “Intel Rapid Storage Technology Driver for 8x series,” provided by MSI drivers download page. Confirmed as a valid driver for the SATA AHCI controller.
"Select the driver to be installed" lists: “Intel(r) 8 Series/C220 Chipset Family SATA AHCI Controller” Looks good, then progress...
Followed by clicking on next- “Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information.”
I've tried installing Windows 7 Ultimate 64 bit via USB drive and OEM disc to no avail.
Performed a test using the same install procedure with my primary desktop computer which uses a MSI z68A-GD65 (G3) motherboard (AHCI enabled.) I was able to install windows to my Crucial M500 SSD without issue.
Confirmed the issue occurs while testing with different hard drives. I have yet to be able to install windows with AHCI enabled on this motherboard.
HDDs tested include:
WD Black WD5002AALX 500GB
Seagate ST3100524AS 1TB
Once I change SATA mode from AHCI to IDE, I was able to install windows without the need of pre-loading the Intel 8 Series SATA/AHCI driver.
Afterwards having installed windows, I decided to test by switching SATA mode back to AHCI. Doing so will cause the machine to bsod upon booting to windows. Later, I performed the registry edit to change IDE to AHCI mode within windows. Followed by again enabling AHCI in bios.
I was able to boot while in AHCI mode temporarily a couple of times until this method stopped working. Any attempt past the bios post, windows will not boot.
I've also tested the manual and XMP profile RAM settings as suggested by the sticky'd thread here https://forum-en.msi.com/index.php?topic=178019.0
I would like to possibly resolve the issue in regards to utilizing AHCI mode for optimal performance for my hard drives and hot swap capability.
When I have more time, I suppose I can run a RAM test; but so far I simply believe it may just be a SATA controller or driver conflict with the motherboard.
tl;dr Cannot install Windows 7 onto any hard drive with AHCI enabled. Works fine with IDE mode.

** Update as of 6/3/2014 ** Issue resolved.
Received my replacement motherboard from RMA. Replacement is working without any issues with SATA mode set to AHCI.
Tested by running Windows 7 and Windows 8 install - both detected my SATA SSD and other HDDs as applicable drives to install Windows onto. Pre-loading the SATA controller drivers was not necessary. Windows boots up immediately without any delay now. Benchmarks are showing valid stats for SATA3 devices.
Also to note, the replacement motherboard came with bios version 1.5, compared the one I sent back which came with 1.6. In case if that had anything to do with it. Not going to risk updating the bios at this point.
Video of issue:
Benchmarks from the old motherboard on the Crucial M500 SSD taken with Crystal DiskMark
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 264.792 MB/s
Sequential Write : 143.991 MB/s
Random Read 512KB : 250.614 MB/s
Random Write 512KB : 142.545 MB/s
Random Read 4KB (QD=1) : 24.176 MB/s [ 5902.3 IOPS]
Random Write 4KB (QD=1) : 82.152 MB/s [ 20056.5 IOPS]
Random Read 4KB (QD=32) : 210.018 MB/s [ 51274.0 IOPS]
Random Write 4KB (QD=32) : 134.663 MB/s [ 32876.6 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:25:19
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to IDE
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 181.472 MB/s
Sequential Write : 141.275 MB/s
Random Read 512KB : 177.430 MB/s
Random Write 512KB : 141.393 MB/s
Random Read 4KB (QD=1) : 21.646 MB/s [ 5284.6 IOPS]
Random Write 4KB (QD=1) : 68.922 MB/s [ 16826.7 IOPS]
Random Read 4KB (QD=32) : 25.411 MB/s [ 6203.9 IOPS]
Random Write 4KB (QD=32) : 108.275 MB/s [ 26434.3 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:41:42
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750) **Replacement from RMA**
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 469.045 MB/s
Sequential Write : 138.655 MB/s
Random Read 512KB : 419.083 MB/s
Random Write 512KB : 135.032 MB/s
Random Read 4KB (QD=1) : 26.454 MB/s [ 6458.5 IOPS]
Random Write 4KB (QD=1) : 89.189 MB/s [ 21774.7 IOPS]
Random Read 4KB (QD=32) : 252.818 MB/s [ 61723.0 IOPS]
Random Write 4KB (QD=32) : 129.909 MB/s [ 31716.1 IOPS]
Test : 100 MB [C: 37.1% (41.5/111.8 GB)] (x5)
Date : 2013/03/10 10:02:50
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)

Cannot install Windows 8 Consumer Preview on MacBook Air 11" (Late 2010)

Hi, I'm trying to install Windows 8 Consumer Preview on my MacBook Air 11" (Late 2010 model) via Boot Camp assistant. I've hacked the Info.plist of the Boot Camp Assistant to allow it to create a bootable USB installer drive. After successfully creating the USB, the laptop proceeds to reboot itself but it never loads up the Windows installer. However, if I restart it while holding Option, and selecting EFI boot, the installer loads up. However, once it loads, I cannot install Windows 8 Consumer Preview to the Boot Camp partition because of this error: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks. Windows cannot be installed to this hard disk space. WIndows must be installed to a partition formatted as NTFS. Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
Can anyone guide me through steps that would hopefully resolve this problem? Thank you in advance

@minxinglee
even i am getting same errors I hope you found out solution by now ! plz... can u share it ! i need it urgently
Thanks in advance

Cannot install windows 8 on Pavilion Elite M9600T (KX745AV-ABA) with Vista 64 BIT

I cannot install windows 8 on my computer. I contacted Microsoft and he worked on it for three hours and said I had a graphics card driver problem.I am using a Nvidia GeForce 9800GT which came with the computer. When I try to update to the latest driver (306.97) Which is on the Microsoft update site and also on the Nvidia site The screen says no signal and goes to sleep. I have been working with a Nvidia rep for a week now and he says it is not their driver that is causing the problem and that I should contact HP. I don't know what else to do. I removed the working Nvidia driver (SP41066) also and Tried to install windows 8 and recieved the same message "Windows installation was not successful" and returned me to Vista 64 Bit. I don't know what else to do. Can someone please help or am I just out of luck. Thank you,
Gene
This question was solved.
View Solution.

You're welcome mrchips108
By the way up for one more go. I was finally able to find someone with a possible solution for you. the user yashoshah on the tomshardware forums had the problem:
"Windows installation was not successful. Your previous version of windows will be restored. Please do not switch off your computer during this time"
SOURCE: Windows installation not successful
He fixed it by removing the HDMI cable and connecting to the monitor through DVI. After it was installed he went back to using HDMI.
How is your video card connected to the monitor: what cable and what interface is on the monitor and what interface are you using on the video card? Perhaps the Microsoft rep you spoke to was partly correct about the video card being the problem. It might be that the driver built into Windows 8 has a problem with certain configurations.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

My computer cannot install windows 7 using boot comp

Similar Messages

Maybe you are looking for