My computer will not load the device drive for my ipone 5. I have uninstalled, reinstalled itunes
my computer will not load the device driver for my ipone 5. I have uninstalled, reinstalled itunes; i have restarted phone; disabled startup devices for windows 7; restarted my computer; Please help- very frustrated
Device not recognized
http://support.apple.com/kb/TS1538
Note: You should only sync to one computer
Similar Messages
-
after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?
Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical. -
hello my computer will not load the photoshop program as it has Inefficient disc space how can i fix this please?
Regards
GeoffHi The Lad,
If you have "INSUFFICIENT" disk space, then you can try and change the install location while performing the installation of the desired product. I am not sure when the error message would pop up saying that the disk space is "INEFFICIENT". Could you please share a screen shot of the error message along with the system information.
Cheers,
Kartikay Sharma -
I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Equium - Windows can't load the device driver for USB dongle
I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am! -
8.1 will not load the dvd driver error 39
The dvd played with no problem in 8, worked fine. I loaded 8.1 now it will not load the driver, says error 39. I uninstalled and reinstalled still the same. I got a external working DVD, plugged it in and the same code, same problem. windows
8.1 does not load the DVD driver.
what is the fix I understand it 8 does not play dvd movies, video this does not even recognize the player for music CD
jack walshPlease repost your inquiry in the
Windows 8.1 Community Forum. Thank you!
Carey Frisch -
How can i load the device driver for my ipod nano 7th generation
When I plug in my ipod nano 7th generation (for the first time), I am getting a message about "unknown device" and "driver not installed properly". Can I manually load the device driver some other way?
Hi there Jen292,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. -
Udev not loading the right driver for usbtmc device
I have a usb beam profiler and I'm trying to get it to work on arch linux. It works using NI-VISA, so I should be able to communicate with it using usbtmc. However, when I plug it in, it does not show up in /dev.
I think the problem is that udev is not loading the tmc interface driver when I plug it in.
Here's a snippet of the output from lsusb -v:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
I believe that bInterface* should look something like:
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 3 Test and Measurement
bInterfaceProtocol 1 TMC
iInterface 5 TMC488
Is there a way to force udev to load the right interface? Or is the problem that I'm missing something from my kernel?Could you post the entire output of lsusb -v for the device?
Bus 001 Device 013: ID 1313:8019 ThorLabs
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1313 ThorLabs
idProduct 0x8019
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
What device node name are you expecting?
Not sure, but probably /dev/usbtmc0
Is there a chance that it is being instantiated as a HID device? Does /dev/usbhid0 appear?
Nope, don't have a /dev/usbhid0
What does the journal say when the device has been attached?
I'm not sure what you mean, but dmesg says:
[ 6095.219400] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
and udevadm monitor says:
KERNEL[6098.321484] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[6098.321887] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV [6098.324333] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV [6098.325356] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb) -
When I connect my IPad to the computer my computer will not recognize the device as being plugged in
I'm trying to connect my IPad to both of my computers. Each time I plug it into the USB port I get nothing. The computer doesn't recognize that a device is plugged in. I have tried re-installing ITunes, as recommended, but I still can't get the computers to pick up my IPad. What is happening?
Device not recognized
http://support.apple.com/kb/TS1538
Note: You should only sync to one computer -
Hi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
KulbirfromhuntingdonHi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
Kulbirfromhuntingdon -
Windows Vista will not recognize the dvd drive in my Mac Pro
After running windows updates, Windows Vista can no longer find the drivers for the dvd drive. Any suggestions?
Thank goodness for restore points. That was all I needed to do (system repair, do you want to restore to last check point) to be up and running.
I found my problem documented as an issue with Samsung SATA + Windows 7, and my X58. Curious, as moving a working system from one motherboard to another would always end up with Samsung SATA DVD not working, but LG is fine... so looks like time to buy another SATA DVD.
This from /technet.microsoft.com exactly describes the issue:
*CD/DVDRW from TSSTCorp (Samsung) drive, after install W7 without any problem not recognized...* | Modified on 9/9/2009 4:48 PM by lmarcelo
CD/DVD/rw do not respond on the Windows 7 Professional RC 32 bit, I have an Intel G35 desktop board, and 2.3 Ghz. CPU Intel Dual-Core 2, with sata optical drive. (From Samsung) Works fine in the raw clean install, but after the second reboot in the device manager appears with a yellow triangle, so I can't read nor write any CD or DVD.
I did this several times, (Format and install), even with a new CD drive, but it's always the same. Using a 160 Gb. WD hard disk, and alternated with a 400 Gb Samsung Sata HD make no difference at all.
Problem: Can't do anything with CD-DVD drive. (Messagge in the Device System General tab Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)).
By the way, this configuration was working fine in XP Pro. SP3. Any hint? clue? same problem? any one?
http://technet.microsoft.com/en-us/library/dd349347%28WS.10%29.aspx -
My computer will not detect the CD/DVD Drive
My computer will not detect the CD/DVD Drive. I am running Windows 7, Home Premium on a HP dv4-1430us
Hi,
Please try the following fix first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Ipod touch will not turn on and computer does not recognize the device
I tried resetting my ipod touch, but there is still no response. I have had it plugged into the computer for a couple of days. I don't know if it is charging or what because the screen won't turn on and the computer does not recognize the device. I have downloaded the latest version of iTunes, as well as restarting my computer several times. Does anyone know what to do? I would try restoring it, but like I said my computer doesn't recognize it and itunes doesn't either. Thanks!
I just had a similar problem and tried all of the reboot techniques with no success. I knew it had to be a connection issue inside the iPod, and grasping at straws, I sprayed a little WD-40. I dried it off and let it sit overnight. Today at lunch I plugged it in to my wall charger and it began charging.
***FYI I know they don't recommend spraying WD-40 on your iPod, but it was a last resort for me. I was at the point of paying to send it in for repairs or throwing it away. I wouldn't try this unless you are ready to throw yours away too. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
TS1702 downloaded app using computer will not load on to phone just says waiting
downloaded app using computer will not load on to phone just says waiting
Hello there Hotley808,
I would recommend deleting the app, and then redownloading it from the iOS App store.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Apps on iOS
Open the App Store on your device.
Make sure you are signed in with the same Apple ID used for the original purchase.
Tap Updates from the bottom navigation bar.
Tap Purchased on the resulting screen.
Locate the app in your Purchased tab.
Tap the download button.
All the very best,
Sterling
Maybe you are looking for
-
Where can I get a net framework 4.x.x MSU?
The goal is to slipstream net framework 4.5.1 or whatever so I can slipstream the rest of the updates that depend on it and simplify this archaic deployment with half an hour of post-installation customizations. Help?
-
Vertical XML Data Component?
Anyone know of a component that I can use to display XML data in vertical columns, side by side for comparison without reworking the XML - something like a spreadsheet layout or any comparison tool you'd see on the web. thanks, Mark
-
HP3015dn and Reader 10: PDF won't print
I installed an HP3015dn. It prints MSWord documents in simplex and automatically in duplex. It will not print PDF files. System: Windows 7, 32-bit. Driver: P3010 Series PCL 6. The HP Universal PS driver also works for Word documents. I upgraded A
-
I would like to configure an IDSM-2 in inline mode, I am having trouble about the deployment, I have a couple of questions; 1. If you configure 2 VLANs (existing) as VLAN pairs does this mean the exist connection between the 2 VLANs is broken? ie the
-
Imported AIFF is super speeded up!
I'm making a podcast. I recorded my voice with a Griffin iTalk microphone on my iPod. It saves files as wav. I dragged the file into a GB new track, and when I play it, it's like 4 seconds compressed into one! It sounds like a tape on high speed. I t