My coverage is within 1 inch either way of Loosing 3g and 4g and phone locks up.

I have just gotten off the phone with their Corporate folks as they were not to impressed with me for filing a complaint with the FCC because of my coverage or should I say lack there of. From what she told me after all the legal mubo jumbo was that the coverage map which was not so well done is only a maybe for coverage as their are 3 little fine print exclusions on the WEB.
I conveyed to her that if you tell me I have 4g and 3g and I move my phone on my nightstand 1 inch either way I loose the 4g. If I move it the other way I lose 3g and the phone locks up till I go into airplane mode and and back out. According to her I am on the fringe of the signals and they are sharing their signal with anouther carrier. In other words tough roller skates. And then to have the audasity to charge me an extra $30.00 to change out the old home phone connect for the newer one that you can get an extended antenea for. Get rid of theold inventory and charge for the upgrade or switch and bait. I urge everyone to file with the FCC individually and hold Verizon to task, I told her I would continue to persue this with the FCC till my area was fixed.
I have a Rezound that is stock. Plus for some reason when I tried to log back into this site I have to unlock my Account as it had been locked for some reason. Wonder who would have done such a thing to me especially after a phone call from Verizon Corporate. ( HUMMMM )

Hummmmm

Similar Messages

My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desktop.

My external HD stopped showing up on my desktop, but shows up in my Disk Utility..
I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't.
Either way, it wont eject or mount, and still doesn't show up on desktop.
There are no ticking noises coming from the hard drive, and it lights up still, and i have tried replacing the cords, and restarting/shutting down the computer, and have tried it on a mac desktop also - same problem.
Any help would be great!!!

and have tried it on a mac desktop also - same problem.
Try this on one of the Macs ...
Open a Finder window. From the menu bar click Finder > Preferrences
Select the General tab then select: Show External Disks

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for...

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for some time. I have and it wasnt fun. I'm glad that you were able to get yours unlike some of us.

I am still wondering why iTunes tries to confuse me every time I try to make changes in my preferences, telling me that I "don't have enough permissions", although I am the administrator.
That's clearly a fault. Whether it's an iTunes problem or a Windows problem I can't say at this time. If you search the Using iTunes for Windows forum for "permissions", you should find threads that can help you sort out this problem.
Then, changes to the format are not obvious, and I get no notice that I am burning music files as data.
If you click on a playlist and look at the lower-right of the iTunes window, it says right there what format it will use to burn the playlist.

HT1349 I just purchased an Iphone and love it except I'm surprised and annoyed that there is no way to create a group within contacts. I coach a youth basketball team and routinely want to fire off a mass email or text to the same group. Am I missing som

I just purchased an Iphone and love it except I'm surprised and annoyed that there is no way to create a group within contacts. I coach a youth basketball team and routinely want to fire off a mass email or text to the same group. Am I missing something?

When I click on my contacts icon on my phone there is a Groups choice in the upper left hand corner. Make sure you are in All Contacts and not a specific person.

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

Contacts not syncing either way

I just noticed that my contacts are syncing -- either way.
I added a new contact to phone yesterday and have synced phone twice. New contact doesn't appear on my Mac.
So I changed one of the contacts on my Mac and synced again. The change didn't appear in the phone.
Are there any fixes for this? Thanks/

Hi,
same problem here: iPhone does not sync contacts any more, either way. I've searched Discussions, reinstalled iTunes after having deleted prefs and cache, reinitialised iSync history, restaured iPhone to factory setting, unlocked again with Ziphone 3.0, checked New phone in iTunes, nothing nothing nothing: no contacts were transferred from my Mac to the iPhone. I've tried to back up and erase my Addressbook: useless. I've tried adding a single contact. not synced. I've checked, and I don't have any particular custom filed on my Addressbook. I've noticed that on iTunes the contacts groups that I have on my AB, are not seen and checkable on the INFO tab, sync contacts section. It's like iTunes and AddressBook are not "communicating".
I can't believe such a vital function cannot work! and I have no clue what do to, since I refuse to reinstall Leopard for such an issue, too much of an hassle!
Please, help!
brunus

Design Pattern: Is the Universe Object a Singleton or Static or either way.

Hi All,
1. I've read this thread: static versus singleton
http://forum.java.sun.com/thread.jsp?forum=425&thread=401035&tstart=105&trange=15
2. Now, specifically if you were to model the Universe Object, what would you choose? a Singleton
or a Static Class or either way depending on your design point of view?
(either way depending on your design point of view imply there is more than one solution to a problem.)
Basically, I'm looking for is the justification of one (singleton) or the other (static) or doesn't matter
in addition to the pure technical pros and cons (or avantage/disavantage) of singleton versus Static (see pt. 1)

<dubwai>
What's 'the Universe Object'?
</dubwai>
Sorry, for not being clear. My assumption is that every body would undertand the word 'Universe' immediately. So with this clarification. I hope you will have more input. Thanks.
public class Universe //Singleton
     private static Universe instance = new Universe();
     private Universe()
     public static Universe getInstance()
       return instance;
     public void do()
public class Universe //Static Class like Math class for example
     public static void do()
     ...all other methods are static
<os>
Personally, I'd make the universe a singleton.
The universe is an 'object', not a class, and if alternate universes are proved to exist you can create new instances,
and not treat it as a singleton any more, without much rewriting (a static implementation would need a total rewrite).
</0s>
1. Keywords: Personally and alternate universes are proved to exist.
Yes, this is the kind of reasoning I'm looking for. By that I mean when we design a class, our reasonning should not depends
on the 'pure' technical concepts of what Singleton class or Static class can do but rather depending on the reality
of the world. And then from that understanding we would choose a Singleton or Static class. This is what I meant by 'Either way, it doesn't matter' which depend on one's view about of existence of the universe whether it's unique or not. In your case (Os), you prefer Singleton because of the possibility of alternate universes.
2. Now, let's admit, there is only one Universe, would you still prefer Singleton class over Static class? for all the techincal reasons that you said
"As a singleton,..."
"It would also probably be useful to treat the universe as a generic Object..."
OR just because a Singleton would be 'safer' to cover the possibility of design extension in that can cover all cases (alternate as well)

[vmware] Best way to share files between host and client

Good afternoon!
I have successfully installed VMware server on my machine and set up a virtual machine, powering Windows XP for study issues (emulation via wine does not do the trick for me). The virtual machine runs fast and stable but does not meet my requirements unless I have two issues faced:
First:
How to access a USB pendrive monunted by the host system properly within the client?
Second:
What is the best way to share file system space between host and client? Should I set up a Samba share which is accessible for both host and client or is it save to grant my VM access to my physical hard disc as a whole (using it as a partition)?
Thanks for answers in advance, I have still quite a lot to learn, when it comes to VMs.
Regards,
~cg

Do not setup your VMware to be able to access your physical disk as a whole. This would have you mounting the filesystem twice, corrupting it in the process.
You /can/ setup VMware with Sharing Folders that lets you share your filesystem (either / or just /home or something else) and that is what I would recommend.
As for accessing the pen drive from both operating systems at once, I'd say use the same Sharing Folders method. I always share /mnt so that I can access my cdrom/USB/etc from the vmware OS.
The sharing folders is basically the same as a samba share, but uses vmware's own method (HGFS). Samba is more secure (if you are worried about your VMware OS breaking from it's shell and attacking your real filesystem, which is unlikely). You need the vmware tools installed to make use of it.

A way to "re-connect" bezier handles and other path editing techniques

I've searched and rummaged through tutorials for days but I haven't found a way to do a few things that I've come to think of as essential when it comes to path manipulation.
I'm using Illustrator CS4 (on Windows XP SP3) and I'm coming from a background of Inkscape. Within Inkscape, there are several handy tools that are missing from Illustrator that I haven't found workarounds for. Here's a list of these tools and a brief description for each of how they work within Inkscape:
]- "Shift + C" with anchor point selected: this will make the bezier handles of the point move independently of each other.
]- "Shift + S" with anchor point selected:
b this will "connect" the bezier handles
so that moving one side moves the other side relatively (and opposite to each other so that the bezier handles form a straight line).
(note: in Inkscape there is no way to make the bezier handles relative and not form a straight line, which is something I know would be useful)
]- "Shift + Y" with anchor point selected: this will make the bezier handles collinear (like shift + S) plus make the lengths of both handles the same.
(note: another possible feature would be to make the handle lengths relative, but not the same)
]- "Shift + Click + Drag" on a selected anchor point with the path selection tool: this creates one bezier handle in the direction you drag. This is very useful if you don't want to change the curve of the other side.
With these functions (preferably including the suggestions I've noted), path editing in Illustrator would be much easier.
On the topic of Inkscape's path editing abilities, there is also a way within the program to delete anchor points in two ways:
]The default way is to press "Del," which deletes the anchor points and makes the anchor points around the deleted points attempt to fill the area as close as possible to how it was with points.
]The second way is to press "Ctrl + Del," which deletes the points and does nothing to the surrounding points.
Inkscape's default deletion method is a huge time saver when you simply have a surplus of anchor points; you can the excess and the shape maintains itself (often the result is for the shape to smooth itself out).
I hope that these suggestions are described well enough to be understood. I also hope that, in understanding these potential techniques, you can see their potential usefulness within Illustrator.

Lee,
All those functions are present in Illustrator. I personally think their interface stinks in some ways, but they are there.
> "Shift + C" with anchor point selected: this will make the bezier handles of the point move independently of each other.
Convert AnchorPoint Tool. Press Alt to invoke it when the Pen tool is active. Otherwise, switch to it with Shift C. Use it to drag a smoothPoint's handle, and it will convert the point to a cornerPoint, letting you move the handle you click independently.
> "Shift + S" with anchor point selected: this will "connect" the bezier handles so that moving one side moves the other side relatively (and opposite to each other so that the bezier handles form a straight line).
Again, the Convert tool. Mousedown on an anchorPoint and drag. The point will become a smoothPoint and both handles will extend symmetrically.
There are also buttons to convert selected points between smooth and corner in the Control Panel when anchorPoints are selected.
> (note: in Inkscape there is no way to make the bezier handles relative and not form a straight line, which is something I know would be useful)
In my musings about Bezier drawing interfaces, I've often imagined a metaphor of "joints" rather than points. (That's really what they are: two adjacent Bezier curves with coincident endpoints.) Joints can be "hinged" or "locked"; "bent" or "straight". They can also be "dislocated". Joints can be locked bent or locked straight, and can be moved either way.
> "Shift + Y" with anchor point selected: this will make the bezier handles collinear (like shift + S) plus make the lengths of both handles the same. (note: another possible feature would be to make the handle lengths relative, but not the same)
See second item, above.
> With these functions (preferably including the suggestions I've noted), path editing in Illustrator would be much easier.
They are there; thier interface is just different.
> On the topic of Inkscape's path editing abilities, there is also a way within the program to delete anchor points in two ways:
> The default way is to press "Del," which deletes the anchor points and makes the anchor points around the deleted points attempt to fill the area as close as possible to how it was with points.
Not present in AI. (Not associated with a direct point manipulation tool, anyway. Commands like Simplify try to remove points while retaining the shape.)
> The second way is to press "Ctrl + Del," which deletes the points and does nothing to the surrounding points.
The Delete AnchorPoint Tool. Invoke it by pressing the minus key. Similarly, there is an Add AnchorPoint Tool, invoked by pressing the plus key. By default, the Pen Tool does that automatically to selected paths, but you can turn it off in prefs (unlike the infuriating auto join behavior, which affects UNSELECTED paths.)
> Inkscape's default deletion method is a huge time saver...I hope that...you can see their potential usefulness within Illustrator
Just about every user of programs like Illustrator, FreeHand, Draw, Canvas know very well the advantages of keyboard modifiers for such things, and all such programs provide them. (Although I do consider AI's treatment considerably more tedious than FreeHand's.)
You need to spend some time looking at the keyboard shortcuts described in the Help files, and carefully practicing them. You need to know how to invoke them while in the process of drawing paths with the Pen.
JET

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

My iPhone 4s screen is cracked and can't slide to unlock it. Several of the icons are not working as well. Is there a way to recover my photos if the phone has never had a back up or synced with another device?

My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?

kitts1979 wrote:
My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it. Several of the the icons on screen will not work either. Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?
No in order to backup to iTunes, you would need to unlock your phone.
In order to import pics to your computer you would need to unlock your phone.

Is there a way of Apple increasing my memory and processors?

Is there a way of Apple increasing my memory and processors so that my 2010 MacBook will run faster? I use 3D programs and filmmaking editing software, and my laptop, as awesome as it is, can't quite keep up with what I do. The programs I am using:
Blender (Open source 3D software)
Final Cut Express
iMovie '09 (usually editing off an external hard drive)
I make most of my films in HD too.
I heard that you can manually replace the RAM and stuff, but Im not too keen on it. Being me, I might brake something. But does anyone know of a safe and secure place to buy extra RAM and memory and processors for a 2010 MacBook.

The only way to upgrade processors is to buy a new Mac. In your case a MacBook Pro would be more appropriate for the tasks you're undertaking.
Your MacBook will only take a maximum of 4GB RAM.
In addition to etresoft's recommendation, Crucial Memory is reliable and equally good service. I think this is the RAM for your model, but to be on the safe side, use the "scan my system" option to getthe exact match.
http://www.crucial.com/store/listparts.aspx?model=MacBook%202.4GHz%20Intel%20Cor e%202%20Duo%20%2813-inch%20White%29&Cat=RAM
Message was edited by: noondaywitch

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

I'm going to be using a borrowed computer, so don't want to make permanent changes to that FF. Is there a way to sync the FF settings and keep them on a thumb drive for temporary use?

Is there a way to sync the FF settings and keep them on a thumb drive for temporary use? I know you can try to copy the "default" folder in .mozilla, but that usually ends up a mess. The home computer runs on Linux, don't know what the borrowed one will be.

There's Portable Firefox for Windows - http://portableapps.com/apps/internet/firefox_portable - and another for Macs - http://www.freesmug.org/portableapps/firefox/ - not for Linux, AFAIK.
Firefox Sync works thru a server, either Mozilla's sync server or a local sync server the user has running on their own LAN. There's no way to sync the data to a thumb drive unless it has a version of Firefox on that thumb drive.
You didn't mention which "settings" are involved, but you can export your Firefox bookmarks in HTML format to a thumb drive, and view that bookmarks.html file on any web browser on just about any operating system.
Bookmarks > Show All Bookmarks ''(or Organize Bookmarks for 3.6 and earlier versions)''-> Import & Backup - Export HTML...
For your other personal data in Firefox, there is no real solution outside of using Firefox.

My coverage is within 1 inch either way of Loosing 3g and 4g and phone locks up.

Similar Messages

Maybe you are looking for