My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible.  Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Similar Messages

  • HT1923 I have a Vista Operating system with 2 users.  Somehow I got two different play lists each with one user.  One is too big for the storage and has a vast amount of duplicates.  Can I delete the one that is twice as large and then access the other li

    I have a Vista operating system with 2 users.  Somehow I got two diffent libraries for the users.  How can I delete the one and then access the correct library on the other users profile?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • HT201401 My iPhone3GS has started crashing. I'll be mid-phone call, or using an app, when the screen will go dark. I have to restart it. Then it shows low battery sign (even though it was 100%). Within 1 minute of charging, iphone starts. Pl. resolve.

    My iPhone3GS has started crashing. I'll be mid-phone call, or using an app, when the screen will go dark. I'll have to do a restart. It dumps to the warning screen that there's no power and needs to be plugged in.
    Once I connect the phone to a power source, in a couple of minutes it's ready to roll again, and displaying a "full battery" icon.
    The phone is almost always fully charged when this happens, and I don't get a crash when the phone is plugged into a power source.
    Took my iphone to apple store, they informed that battery is very good and there is no need for replacement. Might be there is a problem with iphone motherboard. But they can't repair it as my 3GS crossed warranty.
    Where should I go to repair this. Within 2 years...this 32GB 3GS is almost garbage for me with no support from apple. I am ready to send it to apple for repairs and pay the repair charges.
    I tried everything... deep reset ... factory settings .... nothing is working... Apple staff pl. take care of your customers ...

    This is a User to User Forum... You are Not Addressing Apple here...
    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

    My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

    Hi Hannah,
    Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
    To set a tab stop on the go, click in the ruler.
    If you can't see the ruler, Menu > View > Show Rulers.
    To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
    Also, have a look at Menu > Pages > Preferences > Rulers.
    Regards,
    Ian.

  • Can i change the cursor icon when hover over an active link by another one ?

    Can i change the cursor icon when hover over an active link by another one ?

    i have multiple links,so is there a way to have the custom cusrsor work on all links in a page and not just one?......you can see here i have 3 links..but only the top one changes to the crosshair cursor when rolled over  http://prntscr.com/5oxkj6
    actually it seems its not working on multiple instances of the same button.
    nvm found out why,lol...it was because i ndidnt have an actual link associated with the other instances of the button....all good now:)

  • The size of my exported FCP movie is too big for DVD studio pro

    Hey,
    I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into DVD Studio Pro it makes it 4.8gb in size which just makes it too big for it to burn. I have tried changing the compression to no avail and just now decided to clean up the timeline so everything is on one track with nothing overlapping. (The problem was it was a 2 camera shoot so the first camera i had on the bottom track constant with the second camera on the top track when i needed it but still with the first camera underneath.) Do you think this could be the solution to my problem? If you guys could help me out it would be most appreciated!

    some things don't make sense here. please clarify.
    Standard DV is roughly 5 minutes per gig, so that means that you have just about 2 hours of video, ok, got that. Now it's the two track thing that gets me.
    Are you saying you have 4 hours of footage, the same thing from two cameras, and you're trying to set up a multi-angle DVD?
    If it's just that you used two video tracks to edit, then NO, it is not your problem. It's still only 2 hours, the video will be mixed down to one track upon export from FCP to quicktime.
    My suggestion is, instead of bringing a quicktime file directly into DVDSP, use compressor. I believe they have a preset in compressor 2 for a standard 120 minute DVD. IF you're project is truly less than 120 minutes, than that should be fine. If not, then you may have to manually make your own setting and lower the bitrate.
    So the workflow is:
    -open sequence in fcp
    -file>export>quicktime movie... (you can uncheck "make movie self-contained" if you want it to export faster and you plan on keeping your original capture footage around)
    -export your movie to a directory of your choice with a name of your choice.
    -open compressor (in applications)
    -drag the quicktime file you created into compressors main window, this will set it up. Now specify the export setting (120 minute HQ all files either 16x9 or 4x3 dep. on project) and specify a location for the files to be created. I strongly suggest that you use the HQ (High quality) settings in compressor. It's much slower to process, but much better quality.
    -with a 2 hour movie it should take a really REALLY long time to compress, so I'de say do it over night.
    -when compressor is done, you should have 2 or three files. a .m2v file a .aif file, and a .ac3 file. The .aif is your PCM audio, much better quality than the .ac3, which is dolby 2 channel. However, the .ac3 is a much smaller file with a lower bit rate, so if the .aif makes the DVD file size too big, you can switch it out for the .ac3
    -Finally, open up your DVDSP project, drag the .m2v, .aif, and .ac3 into DVDSP and use the .m2v for the video track and either the .aif or .ac3 as the audio (as mentioned above)
    -the good news is, your DVD media is already rendered, so when you go to build your DVD it will go much, much faster!
    By the way, I recommend you go to file>advanced>build do not do a burn and build.
    I find it best to build the VIDEO_TS folder on a hard drive and then use a program like toast to create a DVD (using toasts from VIDEO_TS option). This method also allows you to go back into DVDSP, make tweaks, and reuse your VIDEO_TS folder, not having to rebuild the whole thing each time.
    Remember, 120 minutes on a single layer DVD is going to render fairly low quality no matter what.
    If you have a newer mac and a dual layer drive, you may want to cough up a few bucks and get a dual layer DVD-R, then you have over 8 gigs of space to work with, perfect for HQ 2 hour footage.

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iPad standard window is bit too big for the screen.

    My iPad screen unexpectedly got slightly too big for the display window. The size is bit too big. For example, the keyboard when it pops up does not fully display all tkey sans. Another example is the time/power remaining bar slips out of sight.  Did I accidentally change something?  Is this an issue with version of iOS that I am using (4.3.3)? (Note I'm not talking about resizing by using your fingers.)

    John,
    I am having the same problem.  The enlargement is not the same as the 3 finger tap or the 2 finger zoom.  The screen opens and then bumps to a slightly larger screen just enough to make it too big to see the outer edges.  You can put 3 fingers on the screen and move the screen to see the edges but you cannot get it to shrink to the correct size.  This is the second time this has happened to me.  I am also having some other issues.  Sometimes while in an app the app will close and I will be diverted to the home screen.  And sometimes when playing "with Friends games" the letters on the letterboard (not the key pad) disappear, will not move or are giant.  I plan on taking it back to the Apple store this week but I hate the idea of having to start over.

  • Desktop is too big for the display

    Some how this morning while on my Mac a display setting or something was changed. If your on the desktop, with all windows closed, the background, icons, dock.....everything is too big for the display. If you move the cursor all the way to left it will 'slide' the desktop in that direction. Move it all the way to the right edge of the display and it 'slides' the desktop to the right until you reach the edge. Also the same for the up or down directions.
    At first I thought it had something to do with the multi-touch track pad, but I don't think so. I have checked all the display settings I can think of and have tried re-sizing the desktop to all other settings in an attempt to fix the problem. Additionally I have restarted/shutdown the computer totally to see if it would fix the issue. No success. Please help.
    Thx,
    Audioboy

    I had the same problem, but the zoom was already off. So I went under "options" and unchecked "use scroll wheel with modifier keys to zoom," and that took care of it.
    Thought that might help some others who find this thread.

  • The font for my yahoo log in is very very small anbd my email fonts are far too big and the words overlap, please help to correct this problem

    The font for sign into my yahoo mail is so small that I am unable to make out my ID and password and when I do get into my mailbox, the fonts are far too big and the words overlap. Tried going into tools /options to make changes but not successful, please help.thanks

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • "[Filename]" is too big for the trash. Would you like to delete it permanently?

    Recently, when I delete files, I am getting a message stating, ""[Filename]" is too big for the trash. Would you like to delete it permanently?". This recently started showing up for no reason and in the past I have deleted files significantly bigger and not recieved this message. Any ideas why this is showing up and how I can stop it from happening?
    For reference, I have a 768GB SSD with approximately 470GB of space available so space is not the issue.

    nbar, it seems that this trash issue is a reoccuring issue and that it is resetting itself. I followed the article that provided a link to, but after following the steps and finding success, it started doing it again.
    If anyone has any idea on what might be causing this issue, it would be greatly appreciated...not a life or death situation...just really annoying.

  • Why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

    why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

    Resize it.

  • I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

    I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

    eehenry wrote:
    It is a problem with a secondary provider, "mag cloud" .
    Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
    It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

  • How i can pass the value into 1 line

    Hi expert,
    how do i pass all the value for sales document flow item in one line?
    i'm using this function
    CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
        EXPORTING
          aufbereitung  = '2'
          belegtyp      = i_del-vbtyp
          comwa         = l_comwa
          nachfolger    = ' '
          vorgaenger    = 'X'
          v_stufen      = '50'
        TABLES
          vbfa_tab      = lt_vbfa
        EXCEPTIONS
          no_vbfa       = 1
          no_vbuk_found = 2
          OTHERS        = 3.
    so now lt_vbfa already got data line by line....
    line 1 : contract : 00010 : 1000000 : 19,000.00
    line 2 : order     : 00010 : 2000000 : 10000.00
    line 3 : delivery : 00010 : 3000000 : 10000.00
    how i can pass the value into 1 line?
    for example :
    contract  | line     | amount     | Order     | line     | amount    | delivery   | line     | amount     |
    1000000 | 00010| 19,000.00 | 2000000 |00010 | 10000.00 | 3000000 | 00010 | 10000.00 |
    Edited by: anuar jusoh on Aug 17, 2009 4:02 AM

    Hi,
    What is requirement for passing the data in a single line ? Do you finally need to append the same in the internal table and pass it in the module ?
    You can create an internal table of type 1000 character and can loop the existing internal table. Then you can append the Work area in a single line and can finally append it to the table.
    DATA : ITAB type standard table of char1000.
    Loop at <existing table>.
    concatenate table work area wa_char100 into Itab_char_1000.
    endloop.
    APPEND itab_char_1000 into itab.
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for

  • How to setToolTipText for a file in jfilechooser?

    I want to set tooltip text for a file in jfilechooser for getting its detail to user without selecting a file as it is in windows explorer(e.g for file size,date modified). Since jfilechooser does not give directly reference to a file without clickin

  • After allowing yahoo games popups the browser still blocks them how do i permit the game window ?

    I have tried not blocking pop-ups and permitting exceptions for games.yahoo.com and for www. yahoo.com . yet sometimes i can not play a game windows is blocked from opening the game window. and i am told to adjust my Browser settings to allow pop ups

  • How do i get my original information onto my new itouch?

    I just got a new itouch 4 because my old itouch 4 had a cracked screen. i was setting it up when it said "set up as new ipod" or "set up as an ipod that you originaly had". i selected the "originaly had" one because i wanted my ipod to think that it

  • Cl_alv_table_create= create_dynamic_table

    Hi, When I use this method it is dumping CALL METHOD cl_alv_table_create=>create_dynamic_table     EXPORTING       it_fieldcatalog = it_fieldcat     IMPORTING       ep_table        = <new_table>. The error What I am getting is "LOAD_PROGRAM_NOT_FOUND

  • Sorting playlist issue

    Hard to explain but I'll give it a go: I import all my old CDs into intunes and I number them 1-540 etc. I put the CD in the comments field. I sort the comments field everything is great. Then I make a master playlist with all songs in it. I then cli