My Custom repositories are not visible under content tab of ACC

Hi,
My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
initialRepositories+=/myCustomRepository.PLEASE HELP ME.

Kindly make sure,
initialRepositories+=/com/training/club/tools/myCustomRepository
I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
-RMisihra

Similar Messages

Work items are not visible under UWL in portal ?

Hi,
We are upgrading from SRM 5.0 to SRM 7.0.
We have observed one issue here. Workitems are not visible in UWL in portal.
But workitems are available in SAP inbox. i.e SBWP.
Completed items we can see in UWL.
Could you please let me know any idea on this.
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

Hi Venkatesh,
Can you please share the solution? Which base URL was wrong and where did you correct that?
Your help is really appreciated.
I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
Thanks,
Bhavik

Folder Structure Not Visible under Content Administration

Hi all,
We have EP 6.0 SP13.The Folder structure(Both Business objects and Portal Content) under Content Administration and Folder structure under System Administration is not visible.I have logged in as Administrator and the roles assigned were:
com.sap.pct.crm.crm_default_services
Administrator
ContentManager
eu_role
super_admin_role
When i'm trying to access the portal content,Loading...is dispalyed in Content Area for a while and a message 'error occured' is displayed in the status bar instead of 'Done'.
I'm also having a problem in Detailed Navigation.Nothing is visible under Detailed Navigation.
Any Inputs on the above issues would be of great Help.
Thanks and regards,
Vijaya Sai.V

Hi,
There could be only 2 problems when PCD objects are not being shown.
1) You don't have the permission to view it. But since you are an administrator, you don't have to worry about it.
2) The browser is unable to show the PCD objects.
Now lets look at the solution:
I had faced the same issues where when I tried to access the portal using IP address, PCD objects will not show. So the solution is to access the portal through its "name" rather than the IP address.
I guess you would have tried to access the portal by its name, then you had faced an error in browser and so you are trying to access the portal by IP address.
if this is true, make an entry in the hosts file in your local machine, mapping the IP address to the domain name.
If you dont know how to do it, please follow the following:
Goto the following folder in windows
C:\WINDOWS\system32\drivers\etc\
You will find a file named hosts. Open it in notepad and give the IP address & domain name of the portal in the format specified there. Save the file. Now if you access the portal using its domain name, you should be able to see the PCD. If you are still not getting it, restart the machine and try once more. It should work.
If you are using a Linux system, the file can be found under the \etc under the root folder.
Regards,
Vijai.
Message was edited by:
Vijai Mohan

Seminar Sessions are not visible under My Calendar for Seminar Hosts

Dear support Team,
I have created 2 Seminar sessions but I am not able to see the sessions under My Calendar, even if I am the host of the Seminar. Last week, it was possible to display the session... Do you know if it is due to the settings?
Thanks!
BR,
maria.

The following details will display while applying for leave below the calender images
You have selected the following leave requests:
Type of Leave : Flexi Leave
Date : 20.03.2008 To 20.03.2008
Duration : 7.8 hours
Note for approver:   Please may i have 1 day leave
Cancel button
once the manager approves the leave, employee can view the calender about the status. If approved the employee can click on the date to see the note which was written by the manager. Even manager also can view the note in MSS > Attendance > Team calender.
You have selected the following leave requests:
Type of Leave : Flexi Leave
Date : 20.03.2008 To 20.03.2008
Duration : 7.8 hours
Previous Notes :   Your leave is approved
                           Please may i have 1 day leave
Cancel button
But after approving the leave, the employees and the manager are not able to view the note ie., Previous Note
how can i make visible to both????

Close tab buttons are not visible on every tab, how should I fix this?

Hi there;
After updating to FF5 I have found that I no longer have a close button on all my open tabs. A close button becomes visible once I select a tab, but unselected tabs cannot be closed unless they are first selected. The end result is if I want to close a tab I first have to select it.
Simple version: I want to have a close button visible on ALL tabs at ALL times.
I have tried using the browser.tabs.closeButtons option, but no value 0,1,2, or 3 seems to be getting the job done (default was 1 when I first opened the file)
Any and all help would be appreciated!

If you have a lot of tabs opened then you only get a close button on the active tab (same as browser.tabs.closeButtons = 0)
See:
*http://kb.mozillazine.org/browser.tabs.tabClipWidth

Normal corrections "SDMJ" are not visible under tcode "DSWP"

Hi!
I have the following problem by working with ChaRM and normal corrections.
There are two types of normal corrections:
1) Normal Correction (type:SDMI)
2) Normal Correction (type: SDMJ)
Problem
Since a few days it is not possible to see all the SDMJ normal corrections within tcode
DSWP --> Change Management --> Drop Down "Not Completed".
Only the SDMI normal corrections are visible there.
Questions:
how can this issue be customized in order to see the normal corrections of type: SDMJ in tcode DSWP?
Thank you very much!
regards

We implement SAP Work Center

"View JNDI tree" link not visible under monitoring tab of myserver?

Hi,
The link "View JNDI tree" as mentioned in chapter 18 of administration guide is
not visibile on my installation of 6.1 beta.
Is there some configuration setting that i need to do to make this link visible.
I am having problems with installation and running of my resource adapter. I wanted
to check whether the JNDI name is registered properly and there i ran into this
problem of no link available.
Regards
Manish

They moved this into a popup menu that you get to using a right click
in the tree view in the left frame. There are lots and lots of new
admin goodies available by right clicking on nodes of the tree. It
took me a while to discover this myself. :)
Ben
On 20 Jun 2001 10:29:12 -0800, Manish Verma <[email protected]> wrote:
>
The link "View JNDI tree" as mentioned in chapter 18 of
administration guide is not visibile on my installation of 6.1 beta.

PO conditions are not visible in conditions tab in ME23N

Hi friends,
I am facing an issue where the PO conditions tab is showing up as blank. All other tabs are displayed and GR/IR documents are posted correct. On conditions tab analysis of pricing is seen, conditions records are displayed however no conditions displayed on this tab. Also when I try creating a PO using ME21N conditions appear as ****** and I get the error internal number range missing. Can you suggest what can possibly the issue and how to resolve it?
Thanks in advance!
- Nutan

Hi,
This might be due to authorisations in display prices for PO objects.
PLease ask Basis to check if Activity "09 - Diaplay Prices" is maintained for below objects in the role assigned to user ID
M_BEST_BSA <OBJ> Document Type in Purchase Order
M_BEST_EKG <OBJ> Purchasing Group in Purchase Order
M_BEST_EKO <OBJ> Purchasing Organization in Purchase Order
M_BEST_WRK <OBJ> Plant in Purchase Order
Regards,
Rakesh

Previous purchases not visible under Purchase tab

None of the purchased software shows up under my Purchased tab in AppStore!
How is that possible?
How can I get back my purchased items and redownload some of them?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
Mac App Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4928

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Books on iPad not shown under iPad tab in iTunes

For some reason existing ebooks on my iPad mini are not visible under the "Books" sidebar entry inside iTunes, under the "On This iPad" tab. I can add books to iBooks on the iPad by dragging them to the iPad icon inside iTunes, and the books transfer OK; they simply are not shown in the list in iTunes. I have another iPad which works fine, i.e. books on the iPad shows up in the list; same with an iPhone which works correctly. Alldevices have synch switched off so I manually add books (and music; music list works fine on all of them so it is only books having the problem).
This is frustrating since it means I cannot remove books from the iPad using iTunes. Deleting all the books on the iPad (by doing it inside the iBooks app on it), deleting the iBooks app itself, rebooting, and then re-adding books does not help. Also, the iPad in questio was recently reset using an iCloud backup which did not change the situation.
So any ideas why my iTunes insists there are no books on this particular iPad, even though iTunes happily transfers them?

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Custom work centers are not visible in the production tenant UI after solution is deployed

Hi Experts,
We have deployed the solution into the production tenant. The solution is deployed successfully. But the custom business option(BAC) element which we have created is not part of proejct scoping.
We have created a new change project in production and added the custom business option to the project.
Under this custom business option we have fine tuning activity which is having all the custom configurable code lists.
All these configurable code list are not visible as views. these are already assigned to WCF of one of our custom BO under asssinged objects.
These configurable code lists are displaying like below.
Because of this i am not able to close this fine tuning activity and i am not able merge the change project into Main project.
Once after merging the change project into main project, I came to know the all the custom work centers will be visible. I am correct here?
Can anybody know how to resolve this issue. Please let us know..!
Thanks,
Mani

Hi Mani,
this issue sometimes occurs. Please create an incident as soon as possible. Sometimes the BCSets / BCViews need to be regenerated in the backend. Support can correct this. Mention that you did this using the SAP Cloud Applications Studio.
In general please ask such question here: SAP Cloud Applications Studio
Cheers,
Jens

In PC I have changed the default app location from default to other and copied the previous content to new location and changed the Default location in preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick

In Business Rule child elements of Unbounded element are not visible.

Hi All,
Jdev version 11.1.1.7.0
I am facing one issue in Business Rule...
Scenario: I am creating Approval Service (BPEL) with Human Work flow and Bunises Rule.
I am assingning participant in HW by using Rule based(Connecting HW and BR).
Problem here is:
Shema has "unbounded" element.
<element name="ExpenseItem" maxOccurs="unbounded">
 <complexType>
 <sequence>
 <element name="ItemID" type="string"/>
 <element name="ItemName" type="string"/>
 <element name="ItemPrpjectID" type="string"/>
 <element name="ItemStatus" type="string"/>
 </sequence>
 </complexType>
 </element>
Whenever I create Busines rules to configure rules.
While configuring rules child elements of ExpenseItem are not visible. But those are neccesary to configure rules.
If you can help to me resolve would help.
Is it a bedault behaviour of BR? If so how can i acheive this?
Thanks,
Santosh

Solution found:
Click on RuleSet which you have created.
Expand Rule inside it.
Enable Advanced mode and Tree mode and click OK.
Select Root as Task and click on insert pattren and create pattren which is based on unbounded element (here its meant as fact)
Once you create pattren , will be able access elements under unbounded element for Business rule configuration.

The date update from TFS online are not visible on Project pro

Hi everyone,
I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh. The update are not visible on project pro.
I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
Someone to help me??
Thanks for advance.
rexcs

Hi rexcs，
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My Custom repositories are not visible under content tab of ACC

Similar Messages

Maybe you are looking for