My daughter locked her Ipad so I restored it and now am trying to activate it. It ask for a apple id/pw but the one she thought it was is not working. Any suggestions?
My daughter locked her Ipad so I restored it and now am trying to activate it. It ask for a apple id/pw but the one she thought it was is not working. Any suggestions?
Activation Lock
http://support.apple.com/kb/PH13695
Similar Messages
-
Hi, I am looking for assistance on how to reset the passcode on my ipad. It is asking for a passcode & then I enter what I thought it was and it doesn't accept & disables the ipad for 15 mins. Any guidance would be greatly appreciated ast the call centre is currently closed. Thanks Peter
If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the
Back Up option. If you have just backed up the device, it is not necessary
to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore or have forgotten your restrictions passcode, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
The return button on my macbook is not working, any suggestions?
the return button on my macbook is not working, any suggestions?
By the way, if you are still interested, I found a solution. It's a bit crazy, but basically I have insulated the parts of the keyboard connector corresponding to the power button using some thin tape and then used a very thin wire going from the logicboard (where the test pads for startup are located) to my eject key, this way the original power button does not respond anymore and the eject key can be used as the power button, just like in the new Airs
I can provide photos if you want. -
I bought an iPhone 3GS from eBay all was fine until I had an hardware fault I sorted that out on mp pc and now it won't activate I've been using a 3 SIM card since I have had it and it just won't activate.as far as I'm aware I bought the phone as new so no jailbreak can any1 help
Your ebay purchased phone was hacked/jailbroken. You cannot get help here for jailbroken phones. Sorry.
-
unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?
Urban baul for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help? i get this same error
hummingbird.jeff wrote:
Hi Agan:
Yes indeed ddanielsun is encountering the same problem that led me to initiate this thread ... If you try to install any of the available 10.9.x from 10.6.8 the installer exits with an error "10.9 required for this update" ... seems strange that 10.9 is so very hard to find ! ! !
jeff
Clearly you can not update 10.9 if you do not have 10.9
It is very easy to find, it is in the App Store as the picture I posted earlier displays. Follow the same instructions. If you can't then use THIS LINK which will take you there.
The current version of 10.9 is 10.9.5 and that is what you will get. -
My external speakers are not working, any suggestions?
My external speakers are not working, any suggestions?
try different audio or USB cables.
try the speakers with a different computer.
go to the speaker manufacturer's website and see if there's some troubleshooting info or a new driver that you need.
check System Preferences > Sound > Output
see if the speakers show up in the sound output device list
make sure the mute box is unchecked.
Check Applications > Utilities > Audio Midi Setup
see if your speakers are selected in the column on the left
make sure the mute box is unchecked -
I am starting to affiliate market and need a donotfollow plug in or add on and the one available on your site will not work with version 4 of Firefox. Is there another place I can go or do you have another add on that will perform the same function as the do not follow you have on your site for the previous versions of Firefox? Any help would be greatly appreciated.
OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....
-
Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance
Connect the iPod to irs syncing computer and restore via iTunes/ Place the iPod in Recovery mode if necessary to allow the restore.
-
My daughter dropped her sister Ipod gen 4 32Gb and now the screen only comes up with a white screen. What should I do?
If you have an Apple Store near you, take it there and have them check it. If you don't, I would send it in for service.
-
my mac book pro 17 inch , 2008 year , display went dark after rebooting from origianl disc, and the steps in "everthing Mac" book did not work, any ideas?
The router might be bad or incompatible, but let's be optimistic.
On System Preferences, go to Network/Advanced/PPP. Only two items should be checked: Connect Automatically When Needed and Disconnect when switching user accounts. Uncheck everything else. Now, click Okay on the end of the page. The next time you're online, you shouldn't be disconnected.
If you still get disconnected like before, we might be dealing with a router issue - which can get rather complicated. -
Mail is asking for all my mail account passwords. They should all be in my keychain. Any suggestions? (I have over 50)
Hi ...
50 ??
Open Keychain Access located in /Applications/Utilities
From the Keychain Access menu bar top of your screen click Keychain Access > Keychain First Aid
Click Verify > Start. if necessary click Repair.
You may need to enter your admin password to proceed.
And, from the Mail menu bar click Mail > Preferences > Accounts > Account Information
Go through each mail account to make sure the password is typed in on the right. -
i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....
If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon. -
I bought a new keyboard for my iMac (10.5) but the f1,f2,f3, etc. buttons don't work. Rather, f14 is the adjustment for brightness. How do I change it back to normal?
Certain older Macs can't use later version Apple keyboards.
Various aluminum models were compatible with later model
G5 PowerMac and iMac, while the older could only use older
model keyboards. Third party USB keyboards from a variety
of makers other than Apple may work OK.
Be sure the Mac OS X is updated to the last Combo and
then see if there is any other software update is available.
Not sure now (years have gone by) if there was a firmware
update applicable to the older Macs so they could use later
metal keyboards. I'd found several white USB polycarbonate
Apple keyboards to work with most of the last PPC Macs;
and bought spares as available, metal / newer didn't work
with mine. Several white plastic ones can work w/ intelmac.
There were keyboard model numbers (Apple) noted to work
with aluminum PowerMac G5, while others that look other-
wise identical (except number on keyboard) did not work...
Too new, and they weren't supported. Worked w/Intel-Mac.
Good luck & happy computing! -
Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Can anyone please advice how to resolve this problem. Thanks
Best regards
iPad 2, iOS 6.0.1You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it
Maybe you are looking for
-
Compatibility issue with Nikon's D700 and Aperture downloading RAW files.
Need a little help with this one - purchased a NIKON D700 (today) and tried to download RAW files into Aperture - got a bad message - unsupported image format - (shows on a reddish background) I worked on the problem for about 4 hours, both with the
-
Time Machine not detecting changes in certain folders
I recently noticed that TM does not update its backup from certain folders any more. I have a deep sub folder inside ~/Documents, and when I create new folders or files in it, they do not appear in the TM backup. The backup contains, however, lots of
-
Discontinuationmof article in IS retail
Hi Sap gurus Could you please let me how to discintinue a set article from use in IS Retail? I am not able to discontinue a set article even after doing the following actions. I have deleted the concerned set article inforecord Ensured that no set ar
-
I installed the CRS clusterware (11.1.0.6) on RHEL, but I noticed the $ORA_CRS_HOME/install/root111.sh script is missing from the installation. This script is used when upgrading to 11.1.0.7. Any reason why it's missing? Thanks, mike
-
How do I open/import Mainstage 2 concert and patch files?
MS 3 seems not to recognize anything from MS 2...