My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!
my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.
Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
Similar Messages
-
Since I have arrived in south Africa I cannot send or recieve messages ,I was in the uk and Europe and had no problem ,I have tried to reset to no avail any ideas
What model iPod
Identifying iPod models
http://support.apple.com/kb/HT1353What iOS version (Settings>General>About>Version)
What computer OS and version? I suspect a Mac with OSX 10,5,8
Whart version of iTunes?
A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
iTunes 10.6.3
To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later -
Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?
You want to see a green light on the Time Capsule.
Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light. -
iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.
Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
Thanks a billion once again! -
have tried network reset but my network is not showing cnnot access internet.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
All right, here's what's going on. I have been trying ot run a very graphics intense game on my Macbook Pro with Retina Display through bootcamp on windows 7. When I start the game up, it runs beautifully.... for about ten minutes. Five minutes in, the fans start to whirl loudly. By ten minutes in, performance begins to degrade noticibly and the game starts to stutter. I live with the stuttering until it becomes completely unreasonable and I shut down the game. When I come back to my computer several hours later, the process repeats.
Here is what I believe is happening. When I start the game, the CPU immediately begins to heat up, as CPUs do. Ten minutes in, the CPU has heated up past the safety limit and begins throttling itself back so as to protect itself. Over the course of the next little while, it continues to throttle itself until it finally doesn't have enough power to properly run the game at any reasonable speed, at which point, I get frustrated and quit. My concern is this. I understand that mobile rigs aren't necessarilly the most game friendly, however, this computer should be more than capable enough to handle some light gaming. (Mind you, I'm only playing ten minutes in when the game starts to lag.) Is this something I need to bring into Apple? Is this normal?
Thanks for your help!
MalaxtomDid you download and install the Apple drivers onto the Win7 system when setting up BootCamp? Without them, Windows will have no way of getting the fans to do their stuff when things get hot.
-
hi
im a newby to this but i really need help fixing my macbook air a1369 2010 model display screen, i have replaced all new but its just dead a black screen with no power getting to it at all even the backlit led is dead so the inverter isnt getting power to it either. everything works perfectly through another monitor hoocked into the thunderbolt port, its just theres no power going into the built in display.
i would really appreciate some pointers as to whether theres any fuses that i could change or any pointers on getting the display to work at all. thank you for taking the time to read this and hope you can help a newby get back up & running.Confused, if you just had screen replaced was it working when you picked it up? I'd call whoever fixed it and report it ASAP.
-
I have just tried to install the full version of Anthill to my iPod touch Gen 4. I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004". I already had Anthill Free installed so deleted it in case it was interferring with the new download. I can install other free apps but now can't even install Anthill Free. I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next. I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same. Any help would be sincerely appreciated. Thanks.
- Maybe here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
- Try redownloading the app directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
hello my ipod touch 4th generation will not cut on or charge. i have tried the holding the home and lock button and still won'ty work. i don't know what to do. can you help me please
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
I have misplaced my ipod 4th gen. It has no battery or find my ipod isn't on I'm not 100% it doesn't have wifi but I don't think it does. If anyone can help I will be very great full. Thank you.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem! My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar. When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over! I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good. I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work! The iPod, the laptop and iTunes ARE all fully updated! I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing! I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol. I hope somebody knows a fix or solution! Thank You!
Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
IPod 4th gen in recovery mode and will not restore
My iPod 4th Gen has gone in to recovery mode and it used to say plug in to iTunes, so I do and the computer says it has detected that an iPod needs to be restored so I try and restore it, it starts but when it says restoring iPod the iPod disconnects from the laptop and an error comes up saying the restore can not be completed error 40. I have tried it on two other computers including an apple mac book and still no luck. I've tried searching the Internet for answers but nothing has helped my iPod wont even turn on anymore. I am currently in Afghan and i brought the iPod to use out here i had it 2 weeks and it hasn't worked since and I can not call Apple. PLEASE HELP!!!
Did you try everything here:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
IPod 4th gen grayscale will not detect usb connection.
Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
Does anyone have an answer to this riddle?A bad USB hub will cause the problem ... are you using it ??
-
The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit
Maybe you are looking for
-
Erroneous link between R/3 Schedule Lines and CRM Schedule Line
Hi everybody, I am analyzing the best approach to fix a duplicate schedule line issue in CRM. The documents are modified from R/3 by means of an IDOC (ORDERS05). First of all, let me explain the process. 1.- Document is first created in CRM 2.- Docum
-
Error in the SAP query for Assets?
Hi, I am trying to make 2 queries related to the assets but it is not selecting the data may I know why and where I am doing wrong. I have joined the tables ANLA, ANLC, ANLP and ANLB. Fields that have been selected are as follows: Asset Subnumber ANL
-
After I unpluged my charger from the iphone it shut down and it opened up again and now it just turned on to saying to connect it to iTunes and it says I need to have it Restored. And I'm doing that but a mssg poped up saying: I need to do a Recovery
-
Dear SAP Gurus, 1. For both the Spot Billing & Spot collection, we are facing problem(error: RFC not called successfully or device not connected even if the device is connected) while downloading and uploading the data so we are having to upload the
-
3905 End-Point Maximum Reach Number error message
Dears, I am Hisham Fawzy, I have an issue about that 3905 End-point, it can't be able to transfer internally & externally and this message appear when pressing Transfer button " Maximum Reach Number". I believe that firmware issue but i need to confi