My display has quit working. Does anyone have a solution for this problem?
I have had my Verizon Jetpack MiFi 5510L for a couple of months now. It has worked fine until a few days ago the display on it started looking strange and now has finally gone blank. Does anyone have a solution for the problem?
You can do both, whatever is more convenient to you. As long as VZW gets its hands on the old device you will be good to go. Replacements under the warranrty require the user to turn in the old device to VZW. If your old device is not returned then you will be charged a fee for an entirely new device. Purchasing a tracking number for a shipment of this kind would be a good idea if you choose to send it in. Otherwise dropping it off at a store is the safest route you can take.
I would suggest contacting VZW phone support on this one and running through your options. The VZW phone rep can coordinate a delivery to your local VZW store if they do not already have one in stock. You can also turn in the old device in person to rule out any non-returned device fees.
Similar Messages
-
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0 -
after downloading IOS 7 my Iphone 4S started working slowly,and then i wasnt able to connect to WI-FI, i was looking for nswer to this problem all over the internet and found some steps on apple website, which didnt help me, even after erasing all content WI-FI still wouldnt turn on.Please help, and as soon as possible i need WI-FI to downlload comet finder app to see comet ISON...
This is almost always a hardware failure that requires replacing the phone.
Not clear what you mean by "some steps on apple website", but try everything in this support article:
iOS: Wi-Fi settings grayed out or dim -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?
What Firefox version is currently installed on the computer?
You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks
Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have. -
Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?
I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them? -
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?
By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?
-
I have an iPhone 4S wi iOS 5.1 installed and I can't view the option to enqble iTunes Match under the Music menu. I have subscribed to the service and it works fine on my iPad. Does anyone have a solution to this? Can anyone enlighten me as to what's going on?
Thanks in advance!Yes, that's exactly where I was looking, and that option to turn iTunes Match on/off was non-existent, however, I don't know what happened, it just appeared and is working fine.
Thanks! -
After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone
BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared
-
I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip CouridisiPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece. -
Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?
One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008 -
Hi!
Did anyone happen that AppStore simply disappear?
Have anyone a solution for this problem?
thanks! bbjHi.
Do you mean that App Store has disappeared from the Dock? If so it'll still be in Applications. Select it in Applications, when it opens in the Dock move it one or more places, it will then stay there to access next time you want it.
If you don't mean the above, see if you have accidentally moved the application to the Trash.
Good luck,
Adrian -
My iPhone shut down and will not come back on. Can anyone give me an answer on how to correct this problem?
Connect to a wall outlet so you have solid power, then do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Maybe you are looking for
-
How to switch off save option for endusers in Portal
Hi, how to remove save, cancel option when end user runs the workbook in Portal and make some small changes like using page items or increasing rows and columns I already made 2 changes 1) I removed the option in Oracle Enterprise Manager under disco
-
Hello, I need some general guidelines about setting up Solutions inside of Solution Manager. I have gone through and created logical components for just about everything that we have installed in our landscape. At present, I created 4 "solutions": 1.
-
How to update a webdynpro context node from flex ?
Hi I have an table in webdynpro and a datagrid in flex, both getting the value from the same context node. My requirement is to make the table fields editable and when I make changes in the datagrid, it should get reflected back in the webdynpro tabl
-
How to make a form dynamic so that it displays different logos at runtime
I am working on some assignment wherein I would like to make a form dynamic so that in it's designated image holder it displays different logos/pictures at run time? First of all is there such a possibility?? I am still very new to this forum and als
-
How to set the column width in the PDF exports of interactive reports ?
Hello, I have a huge problem with the PDF export for the Interactive reports. I'm using APEX 3.2. I have to produce a PDF report in landscape format that show 21 columns. My problem is that the columns have a ridiculous short width and that the text