My dock/genie effect is NOT working on my MacPro1

I'm running 10.4.11 and all of a sudden today the dock and the genie effect stopped working! Why? The application icons down in the dock stopped animating and when I click on 'Auto hide and show dock' the dock doesn't come up... I have to click my mouse then it 'pops' up... I've done the trashing of com.apple.dock.plist and still doesn't work. Could it be the mouse (Logitech MX Laser)... What's the deal!?

Hi,
Please try Run now from the following link:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
or:
http://support.microsoft.com/kb/314060/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Effects Panel not working correctly

I have Windows 7 64 bit, Home Premium and using PSE9. When I open PSE in Full Edit and go to the Effects Panel, the Filters work just fine, but the Layer Styles will not open (or show anything) and the Photo Effects will not open ( or show anything). I did rename the MediaDatabase.db3 file as MediaDatabase.old, following instructions given in a PSE9 class I am taking....but have done nothing else with that file, and then is now a new MediaDatabase.db3 file under the "old" listing....so two files there.
I have no idea what to do to correct this....and I did close everything and close PSE and also my PC...let them rest a while, and then restarted the PC and reopened PSE9, and still the Layer Styles and Photo effects did not work. I hope someone can understand my problem and help....in simple "baby steps". Thanks

Should I delete the file named mediaDatabase.old? I am a senior
"dummie" and just want to be sure what you are telling me.
I did delete the editor's pref files....I understand that one.
Thanks for your help.

HT4085 My sound effects is not working

My sound effects is not working can help me ?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Make sure sound is not muted.
http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Imovie 10.0.1- Ken Burns effect do not work

imovie 10.0.1- Ken Burns effect do not work

Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
More details here:
http://help.apple.com/imovie/mac/10.0/#movc6e02f503
http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
Matt

FCP HD SOME EFFECTS NO NOT WORK

I HAVE SEVERAL LOCATIONS IN MY CURRENT PROJECT THAT HAVE EFFECTS INSTALLED AND THEY DO NOT OCCUR DURING PLAY BACK AND THEY ARE RENDERED. I HAVE TRIED TI 'JOIN THRU EDIT', THEN RECUT AND INSTALL THE EFFECT. THIS SEEMS TOOCCURE WHEN THERE IS A RED DIAMOND ON EITHER SIDE OF THE CUT.

Welcome the the forum Durward,
Please don't use ALL CAPS, it comes across as shouting.
What effects are not working?
What are your render settings?
What media format...DV, HDV, Grahics...etc.
Just need more info...
Kevan
EDIT - Have you tried trashing preferences, and repairing disk permissions?

Ipod Touch 1st Gen - Home button not working

Ipod Touch 1st Gen - Home button not working. Warranty over. I want to replace it with a new one. Grateful if anybody helps me to locate apple's authorized service centers in New Delhi. Also please let me know how much would it cost. Thanks in advance.

See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data.

Creative Console effects do not work

$Creative Console effects do not work@ Hi,
I have an Audigy SE with latest drivers, windows 7 64, and I'm using headphones
When accessing the Creative Console Launcher, the volume control, eax, everything has no effect on my sound, and it is clearly labeled 'headphones' at the top.
If I go to the Audio Control Panel, it has EAX functions that DO work, though, there are no bass adjusting functions etc.
Clearly, the EAX etc works, though it and the other features do not work in the Console Launcher, so I hope there is a way to fix this~
I even tried installing <a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-0-07-3-2009-AudigySE-Value-LS/td-p/53329]daniel's[/url] driver, still the same issue.
Thanks

bump please I would like my pc to have to nice sound...

My ipod nano (4th gen) is currently not working any ideas?

My ipod nano (4th gen) is currently not working mainly because its stuck on the apple symbol, i have reset it countless times and have restored it but it will not go away any ideas?

is Ipod 4, not Iphone =o)

Dock Genie effect not working

Does anyone know how i get my dock to do the genie effect or the scale effect. It was working the other day but i think it stopped once i moved some of the icons around. i know its a lame thing to stress about but now my dock just seems so dull. Thanks.

A warm welcome to the forums JK!
Please start a New topic here so we don't confuse issues and who we are responding to!...
http://discussions.apple.com/post!default.jspa?forumID=751

Sound effects is not working

My sound effect some taime workin and some tiam is not working i reset and all chek my Sond but i dont know why ????

Hi Kamranhor,
Thanks for visiting Apple Support Communities.
If you're not hearing sound from your iPad, the steps in this article can help:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Even though the article references the iPhone, the steps can help an iPad, too:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPad is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPad is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPad.
If restarting doesn't fix the issue, ensure that your iPad is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPad software, please contact Apple Support.
Best,
Jeremy

Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
-Kingofbytes

Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
Her 30GB = v1.2.1
My 80GB = 1.0.2
Mine is newer by about 6 months. Both are the latest software according to the screen.
Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

2nd gen ipod will not work or neither of 2 computers will recognize it

My Daughters nano 2nd gen just stopped working, it will not do anything, "froze" up solid as she says.
I have gone through the "5Rs" but nothing will make the ipod show any life and nothing seems able to make the computer see the ipod. I can't do the "restore" option because the computer needs to acknowledge the ipod to complete that step.
I have 2 computers and neither computer recognizes the ipod at all. i have read all the troubleshooting tips, all the tips in the discussions any other suggestions, we are 4 hours away from an "Apple Store"
I am really new to this iPod world, and it appears there is nothing to friendly about it when it comes to this,

I am also having a similar problem when i try to connect my ipod it comes up with the error message "the software required for communicating with the ipod is not installed correctly. please reinstall itunes to install the ipods software."
i ran itunes diagnostics and it said that itunes helper is not running.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
EMACHINES E4028
iTunes 7.7.1.11
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.1.5
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 65B56A93FAD8B1F6
Current user is an administrator.
The current local date and time is 2008-08-17 17:42:38.
iTunes is not running in safe mode.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.1.11 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.1.29.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
I have uninstalled and reinstalled itunes many times doing the full uninstall as outlined on the support page. I have also tried installing an older version of itunes but this did not work either. I checked msconfig and ituneshelper.exe is selected to load at startup but when i check task manager it is not there.
Is there any way to fix this problem. I have been trying for two whole days to sort this. I have tried the ipod on other computers and it works fine so i am certain there is nothing wrong with the ipod.

Ipod touch 5th gen tilt function not working

Hi
I recently got a replacement (from apple) for my Ipod Touch 5th Gen 64gb due to the home button being broken. It is running the latest software which I believe is IOS 8.1.1
Note - other than the broken button I had absolutely no issues with my old Ipod.
When I received the Ipod only 3 days ago I did the normal process of restoring from back up etc but have noticed that the tilt function is not working.
I have tried all the obvious solution - first being checking portrait orientation isn't locked, then resetting the Ipod via holding down lock and home button and finally I have done a factory reset and still have had no luck with this issue. Is there an easy fix to this or am I going to have to go back to the Apple store?
Thanks

If you successfully restored (went through all steps without error) to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

My dock/genie effect is NOT working on my MacPro1

Similar Messages

Maybe you are looking for