My DVD story...

Got my G5 back in February... everything is factory + 1 gig ram. From the start I was able to burn CDs just fine. With DVDs, I was successful maybe every third attempt. Everything seems fine until verification, and I get an error message (0x80020063) telling me that verification could not be completed, that my media was unreliable and that I should try again. I've tried both 8x and 4x burn options with no difference in results. Usually, on the third attempt, verification was still not successful, but somehow my computer will still read the disk if I re-insert it after it has spit it out. I even removed and inserted the disk several times, and still get a read. This is a backup, however, so I'm totally afraid to rely on this disk for future reference.
So, is it a media problem (Imation DVD+R 16x) or a drive problem? Should I buy another brand of disks? I sure hate wasting the time and media to get one maybe successful burn out of 3 attempts.
Thanks in advance for your help.
Susan

Hi Susan,
I can relate. The really scary part is finding out you have corrupt discs dating 12-months back and you never even knew they were corrupt. IMHO, based on my experience, DVD back-ups are only good as a short term solution. Everyone has different back up needs (we are photographers) but for me I settled on the following:
Import Images
Copy to 2nd Drive
Sort/Rename
Copy to RAID5
Burn DVDs BTW: I have taken to using the Disk Utility to create a disc image, copy the files to that and burn that. Level 2 tells me that is a completely different burning engine but so far (knock on wood) a 100% success rate. The catch: it is a Mac volume, a PC won't read it.
Check everything and delete the "copy to 2nd Drive" files. Two copies now remain: one on a FW external drive and one on a SATA RAID 5, two different towers.
All work is done with the files on the RAID 5. Once all work is done, no more orders, the folder is then backed up to a removable hard drive. Hard drives are cheaper, faster, & more reliable than DVDs. At first, the enclosure might set you back (I use a Weibe tech) but internal drives are cheaper per GB so you will make that up! Did I mention it was faster too!
Finally, delete the original import, drag the RAID 5 files to a "Delete" folder that I purge when I need the space.
Whew. Moral of the story... I don't trust DVDs... I have had too many show up with no info.
Mike

Similar Messages

  • My story is working in dvd studio pro but how do I get the track to play with and without the story?

    Hi there,
    I've targetted my first button to play all and I've targetted my second button to play all: story 1. The play all option is still playing the same as the play all:story 1 option.
    Can someone please help me figure out what I'm missing here. It should be straightforward but something isn't working.
    Many thanks
    Oonagh

    Not sure if I explained my problem well at the start.
    I have a 1 track dvd and I want two play options. 1 is the play all option, the other is an interactive option where the track will stop at certain points in the dvd. I have created 2 stories for each task. However, I can't alter 1 story without it altering the other story. Therefore for the play all option, when I want to take out the property whereby it stops at certain points in the interactive play option, it takes it out of both stories. If I target the play all button to just the track without any story, it still is linked to the interactive story.
    The way I've made the story markers interactive is by putting the playback option to infinite.
    I thought I had solved the problem by  deleting the interactive story markers  in the play all story  but now when it plays through, it's not seamless where I removed these chapters and seems to jump a bit at these points.
    If anyone can shed some light it would be much appreciated

  • Audio Glitch in Apple DVD player when at the end of a story

    Hi Could anyone shine a light on why when I build and open up my dvd project in Apple dvd player there is an audio glitch. But on the original mpeg there is no audio glitch there. I have chapter markered my project in fcp. I have ten storys and one chapter in each story.
    when played on a dvd player the glitches are not heard
    Any help on this matter would be great.
    sam

    in Apple dvd player there is an audio glitch. But on the original mpeg there is no audio glitch there.
    when played on a dvd player the glitches are not heard
    Have you played the DVD with more than one player without hearing glitches? What, exactly is the glitch? A click? In any case what you report suggests that there is a problem with Apple's DVD Player.
    Do you hear the glitch when you play the DVD (the physical disk) with Apple's DVD Player?
    I seem to be having a similar problem, but I haven't burned a disk and used a DVD player to play it. See this thread: http://discussions.apple.com/thread.jspa?threadID=1863240&tstart=0
    DVDSP shows my soundtrack file to be longer than what it actually is. Is that the case in your situation?

  • Mac OS X Install DVD erased my HD: a nightmare story

    Stay tuned as I will update this thread, but I figured I better post it ASAP in case anyone else gets the bright idea to install 10.5 over target disk mode.
    *Short story for now:*
    G5 running 10.4. Disc drive broken, won't read DVDs, and keyboard won't function (except for return key) when booted with option into the boot select screen for some reason. Only install solution seems to be to install with the disc in a laptop, installing onto the G5 HD as target disk mode. I chose Archive and Install to be safe.
    The installer seems to get all the way through, then fails with the error (paraphrased):
    *INSTALL FAILED*
    *Mac OS X could not be installed on your computer.*
    <warning icon>
    *The installer was unable to import your user directory from the previous system. You will need to create a new user account in Setup Assistant. Your original account is stored in "/Previous System/" folder.*
    *Click "restart" to try installing again.*
    The G5 won't boot (question mark folder), turns out the only thing on the drive now is as folder called BaseSystem.pkg.217aY51ZZ which contains 41 language related .plan files and an empty Receipts folder. Oh, and a PDF of an old DiskWarrior report, for some reason.
    Here's the *ls -la* list of the drive:
    total 4392
    drwxrwxr-t@ 23 darwin staff 850 Apr 20 05:12 .
    drwxrwxrwt@ 6 root admin 204 Apr 20 15:57 ..
    -rw-rw-rw-@ 1 darwin staff 15364 Apr 20 15:55 .DS_Store
    drw-------@ 8 darwin staff 272 Nov 23 19:12 .Spotlight-V100
    d-wx-wx-wt 3 darwin staff 102 Apr 20 15:54 .Trashes
    -rw-r--r-- 1 darwin staff 0 Nov 16 20:27 .com.apple.timemachine.supported
    drwx------ 5 darwin staff 170 Apr 20 15:53 .fseventsd
    -rw-------@ 1 darwin staff 589824 May 22 2004 .hotfiles.btree
    -rw-rw---- 1 darwin staff 16 Mar 9 2009 .vbt5
    drwxr-xr-x@ 2 darwin staff 68 Mar 5 2004 .vol
    drwxr-xr-x 44 darwin staff 1496 Apr 19 21:26 BaseSystem.pkg.217aY51ZZ
    -rw-r--r--@ 1 darwin staff 382976 Apr 19 19:52 Desktop DB
    -rw-r--r--@ 1 darwin staff 1227970 Nov 2 19:51 Desktop DF
    drwxrwxr-x@ 2 darwin staff 68 Sep 26 2003 Desktop Folder
    -rw-r--r-- 1 darwin staff 22674 Nov 23 18:27 Macintosh HD Report.pdf
    drwxr-xr-x@ 5 darwin staff 170 Dec 8 2003 Network
    drwx---rwx@ 3 darwin staff 102 Oct 20 2004 Network Trash Folder
    drwxr-xr-x@ 2 darwin staff 68 May 24 2004 TheVolumeSettingsFolder
    drwxrwxrwt@ 5 darwin staff 170 Apr 19 19:52 Volumes
    drwxr-xr-x@ 4 darwin staff 136 May 22 2004 automount
    drwxrwxr-t@ 3 darwin staff 102 Dec 22 2005 cores
    FML, as they say. Thanks Apple.

    A user burned DVD+R DL version of any version of Mac OS X is asking for trouble without a backup. Technical reasons alone can cause problems. Apple uses commercial grade optical discs when selling optical discs to the general public. These are hard to come by, and have properties consumer grade discs don't have, such as DVD+R DL discs that are able to be read on original Apple DVD-R only drives. Secondly when you make a copy, it rarely if ever is as good as the original because optical drives face the same type of sector errors that hard drives do. Third, if the drive you say is broken is the one that originally made the copy, likely it was already getting broke at the time the copy was made, meaning the copy you made was already subject to impurities of being on a broken or dirty drive. You should have tested the copy on a backed up system regardless, before trusting it to your system after the drive was definitively broke. Now for target disc mode installs, you have other variables you should be aware of:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=6031855
    We are of course assuming you have license to make that copy. If you aren't, none of the advise should be taken here, because terms of use forbid us discussing illegal activities on the right hand side of this page.

  • DVD Studio Pro - Story for "Play All"?

    I want to make a DVD with four videos on it. The user goes to the menu and selects either Video 1, Video 2, Video 3 or Video 4. When each video is finished, the user is returned to the menu.
    I also want a "play all" button, so that the user can watch all four videos from start to finish.
    This is what I did, and it didn't work:
    I made a single track, and put all four videos on it. There was a chapter marker on the timeline at the start of each video.
    I made a story that contained all four chapter markers. So the "play all" button worked just fine.
    I also made buttons for each individual video. I targeted each button for its respective video. But when you select Video 1, it still plays all four videos. When you select Video 2, it plays 2, 3 and 4. And so on.
    How do I tell it to play a single chapter, and not all the videos on the track?

    Set the "End Jump" for each chapter story to return you to the Main Menu.
    x

  • Using "One Step DVD from Movie" on my IMac 10.8.6 using Verbatim DVD-R ("Life Series") 4.7 GB 16X 120, I get a wide angle version of my two minute story rather than the 3X4 standard aspect ratio that I normally get and want.  Help!

    While using "One Step DVD from Movie"  using DVD-R Verbatim ("Life Series" 4.7  16 X  120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio.  The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio?  Advice will be greatly appreciated.

    Try this basic troubleshooting fix :
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iDVD folder. 
    Click to view full size
    3 -  reboot.
    4 - launch IDVD and try again.
    Personally I would not the the one step method but create the iDVD project  from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • No audio in burnt DVDs (another horror story)

    Many have a similar problem but no one has quite the same:
    - in iMovie project, audio sounds great
    - in iDVD project, audio sounds great too
    - exports to my iPod just fine (with audio)
    - no audio when it reaches my DVD, however
    EXCEPTIONS:
    - audio is OK when playing with my iMac, iBook or any Wintel box;
    - any audio is OK if recorded in the main DVD menu;
    - all previous DVDs have OK audio, until last Saturday
    In other words, no audio when playing with a regular DVD player.
    I can see 2 potential causes:
    1. Computers can read a wider variety of audio formats than regular DVd players (strange, however, because the DVd playewr can read all DVDs burned before Saturday);
    2. Preferences/settings are not OK in iMovie or in iDVD.

    strange, however, because the DVd playewr can read all DVDs burned before Saturday);
    I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility.
    David Pogue also recommends Verbatim on page 356 of his latest book:
    iMovie HD & iDVD 6: The Missing Manual
    Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."

  • How to connect my Macbook Pro to play dvds on my TV

    What cables and which output ports are best to play DVDs on my Macbook pro and displaying the movies on my TV? I was thinking the video output would be either "mini display" or "firewire" and the audio would be the headphone audio out port, but I'm guessing and I would rather not buy a lot of cables I don't need.

    Actually, mini displayport is digital only so you can only output to digital standards like DVI or HDMI. If you have an old CRT w/ RCA inputs (the red, yellow, white inputs) then you won't be able to connect your MBP (at least not w/o an expensive convertor). There is a DVI to video adaptor but that is b/c DVI can transmit both digital and analog; your MBP, however, is not capable of sending an analog signal through there.
    Long story short, if you have a new TV w/ digital inputs, then there are a lot of options, but realistically none if you don't have digital inputs.
    You can buy this combination for HDMI:
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
    http://store.apple.com/us/product/TR842LL/A?mco=NDY5NzgwMw
    You can also buy a mini displayport to hdmi adapter and hdmi to hdmi cable from amazon (or other electronics stores).
    If your TV accepts DVI, you can get this combination:
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
    & a DVI to DVI cable not sold at the Apple store.

  • DVD drive won't read disks at boot

    I have a Paviliton DV6-2113sa running Win7 HP  64bit. 
    I removed Acronis True Image and when I rebooted I got a BSOD at the point when the coloured balls should merge into one.
    I thought OK, put the system repair disk into the DVD drive and boot up, but the drive is failing to read any recovery dosks. I think the drive has packed up as I haven't used it for some time.
    Can I use any replacement drive in this model or must I get the same one again?
    The drive light flickers as though it is reading data but it doesn't 'spool up' to speed and I don't get the 'press any key to load from DVD'.
    The BSODs are a seperate issue which I think running a system repair will fix but I can't as the drive won't read data.
    Is it possible to put the repair disk files onto a 4gb USB stick and if so, how do I do it?
    Thanks.

    Hi Peeps
    I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
    Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
    But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
    Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
    Macbook 2Ghz, 512Mb, 60Gb, Superdrive   Mac OS X (10.4.7)  

  • Grey screen won't allow me to install Leopard from install DVD

    I'm trying to do a fresh installation of Leopard on my Mac Pro. I have used the Leopard install DVD previously to install to this machine when Leopard was first released and I had no problem then. Now, the machine boots and I can hear it reading from the DVD. On screen is the apple sign and the rotating symbol underneath it. After a while I hear the hard disks power down and then up again and shortly after that, the screen fills with a dark screen from top to bottom and a message says that I need to restart the machine by holding down the power button. It never gets past that point. I can boot with no problem to the current installation on hard disk, but can't do a new installation.
    I've tried this with all peripherals detached. I've even tried taking out all the hard disks just ot see what happens, and I get the same problem. I've verified/repaired the hard disks and also run a repair on the security rights. No success.
    I have also tried the original Tiger install disk that came with the machine and that does the same thing, so I'm beginning to assume that this is some sort of hardware issue. I've checked the console logs, and the last thing that seems to be there is a message saying:
    14/04/2009 09:55:41 [0x0-0x1e01e].com.apple.systempreferences[230] Could not interpret boot device as either network or disk
    The hardware diagnostics tests report no problems.
    Anyone got any ideas?
    Thanks

    [I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
    [Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
    [Mac OS X Kernel Panic FAQ|http://www.index-site.com/kernelpanic.html]
    [Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
    [X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
    [Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
    [Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
    [12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
    [Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0]

  • Sound problems with film made in iMovie when burned to DVD in iDVD

    PLEASE HELP!!!
    I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
    So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
    Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
    Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
    So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
    I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
    I have searched and searched for help on this but am unable to find any.
    Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
    If anyone can help it would be much appreciated.
    Many thanks in advance.

    Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
    The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
    Not much else I can do though I suppose.

  • Why would the Firewire Port and/or External DVD-RW suddenly not work?

    Hi, it's me again. I swear, I must be destined to just use Windows machines...
    Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
    Ok, so that is the back story to my problem, which happens to be this:
    I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
    So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
    I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
    I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
    But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
    I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

    Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
    but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
    I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
    I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
    For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
    Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

  • DVD problem with missing loops, instruments

    (trying to get a helpful subject there for those searching for answers)
    the fact that the loops are greyed out and instruments missing in new garagebands is well known. so is the solution of installing from DVD. i cant seem to get that to work for my high school music class.
    back story is that every student has a macbook (yes i know.. amazing). thing is, most students give their macs to the IT department to get their machines 'set up' and the IT department collects their DVDs. i borrowed a bunch of those DVDs from the IT department and inserted the DVD when asked but its just not working..
    any ideas? do i need to get the EXACT DVDs that came with the machine? i doubt that.
    also - why doesnt any of the download options work? does anyone from apple know thats broken?
    lastly - what about instruments? i can get the students some loops by dragging loops of my machine into garageband (using target disk mode), but how do i get instruments? i dont drag them into the loop browser, so where might they get put? should i put them in /Application Support/?
    as we're talking about 37 students (this semster - last semester we had an ugly fix) i thought i'd ask before i did something.
    thanks a bunch..

    http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops

  • Need to boot broken Mac-Mini using retail Snow Leopard 10.6 DVD

    Hi,
    In Summary:
    ==========
    I have Mac Mini (late 2009) which does not boot anymore and I need to install Snow Leopard using retail DVD (version 10.6). The OS/installer from the DVD does not seem to boot either. I always very much appreciate the efforts of true geeks. So please, any casual beginner, please do not demoralize with something like "cannot be done" etc.
    The complete story:
    ==================
    The start of the problem:
    1. All of a sudden, one fine day, on start up, my Mac Mini strated to shut itself down without no apparent reason to me. When trying to boot, it would show a progress bar for about 5 minutes - I am assuming that was disk-consistency check being performed. My best guess is that right after the use of Carbon-Copy Cloner (but I am not 100% sure) it all strated to happen.
    2. Performed Mac's Disk-Util check and [Verify Volume] used to display "invalid directory item count, should be 31 instead of 29". Surface scan said disk hardware is 100% fine. Volume Repair never worked, since OS X was installed on the primary disk. I lost the DVDs that came with this Mac Mini, so the option to boot from that DVD and launch Disk Util etc. was not possible.
    TechTool Pro - No Help:
    3. Started googling and had to choose between [TechTool Pro] and [Disk Warrior], opted for TechTool Pro. Tried its bootable DVD only to learn that TechTool Pro cannot fix it. Again, it's surface scan suggested disk hardware is 100% fine. Sent the details to TechTool Pro support team, they couldn't help either after a couple of e-mails+data exchange. (How do I claim my lost money with TechTool Pro - suggestions appreciated as well).
    Googling / Mac Forums:
    4. Started looking into forums, learnt that someone had successfully repaired this problem using Ubuntu 11.04 install DVD (i.e., without installing the Ubuntu, but just using its 'try from DVD' feature). I had that handy, but forgot to disable HFS+ journaling before attempting to fix the problem. Anyway, attempting volume repair that way couldn't fix the problem as well. However this step took away my ability to boot from Mac.
    5. However using Ubuntu's bootable disk, I could access Mac-HDDs contents - and was able to successfully back-up *all* my important data.
    6. Googled and learnt that just attempting to boot using Ubuntu DVD can take away ability to boot using Mac bootable media - possibly due to EFI internals. Suspecting EFI is now corrupt, I tried other 'hacks' like:
      6.1 eEFIt Boot Disk - which does not work at all,
      6.2 Empire EFI w/ Chameleon - not sure how to proceed with options presented - trying either does not work,
      6.3 Super GRUB2 - boots fine, but attempting to boot from Mac-HDD fails after a couple of seconds,
      6.4 Boot-132 - boots fine, prompt asks for input, but then I cannot eject/replace the DVD due to Mac-Mini (lack of) design,
      6.5 Ubuntu 11.04 / 11.10 - still boots fine - just that I cannot go into Mac-OS-X from here,
      6.6 TechTool Pro bootable DVD - which used to boot fine earlier stopped to boot.
    As you can see, none worked successfully. So I didn't yet try other popular rescue media - as I suspect that is not the direction I need to go into.
    >> Looks like most of my problems are due to the fact that I have Mac-Mini which does not allow eject/replace of DVD from command prompt / out side of Mac-OS-X.
    7. Tried emptying EFI partition, playing with EFI/Mac-OS partitions boot flags, Zapping the PRAM, nothing still allows me to boot either from Mac-HDD or any Mac-Bootable-DVD.
    Current State:
    8. Now while boot time, Mac displays a gray screen for a few seconds, and then a blinking prompt on black background. That's it!
    Snow Leopard 10.6 Retail Install DVD:
    9. Went to Mac store and bought this DVD only to witness that I can't boot from it as well. (This is a huge shocker, how is Apple able to sell these DVDs if these don't work on genuine MacMini itself. After all we are able to boot from and install Windows/Linux on a variety of Machines).
    I am hoping for a very small step/fix that I am missing, since I can still see and access all Mac-HDD contents after booting from Ubuntu bootable DVD. However I am prepared for a good amount of exercise as well - assuming someone posts a valid/verified fix.
    Things available right now:
    ==========================
    A. Genuine Mac-Mini (Late 2009) who lost it's ability to boot either from its HDD or Mac-bootable DVDs (TechTools Pro, Mac OS X retail DVD)
    B. Mac OS X 10.6 Retail DVD
    C. NOT AVAILABLE - DVD that came with this Mac-Mini
    D. Variety of rescue DVDs, listed in section 6 above
    E. Another machine/PC with Ubuntu 11.04 - giving me ability to access internet
    Thanks for reading.
    Zita

    I had a similar discussion recently with another user.
    Your Mac mini (late 2009) originally came with Mac OS X 10.6.2 build 10A432 or build 10C2234 see http://support.apple.com/kb/HT1159 it would have come with an original install disc specific to your model of Mac which you could use to run Disk Utility from or to do a complete reinstall.
    The retail boxed copy of Mac OS X 10.6 (Snow Leopard) was originally intended for older Macs which had previously come with Mac OS X 10.5 or 10.4. It would have on it a version of Mac OS X 10.6 or 10.6.1 which would be able to boot these older Macs, but had no need to boot newer Macs which were released after the launch of Mac OS X 10.6 since all those newer Macs already shipped with their own discs.
    So it is normal that the retail boxed Snow Leopard installer does not work on your model Mac mini. You should be using the one that shipped with your Mac mini instead. I am guessing you have lost it.
    Assuming you have lost the Mac mini original disc, I can suggest the following options to try and workaround this.
    If you have another Mac, an older Mac, one that will be bootable using the retail Snow Leopard install disc you have, you could do either of the following.
    Connect an empty external GUID partitioned hard disk to this other Mac
    Boot from the retail Snow Leopard installer
    Install on to the external disk
    Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
    You can now disconnect the external drive and connect it to your Mac mini and boot from it by holding down the Option key when you turn the Mac mini on
    or a similar process if you want to wipe the Mac mini and reinstall directly on to it
    Boot the Mac mini in FireWire Target Disk Mode (see http://support.apple.com/kb/ht1661 )
    Connect the Mac mini as an external hard disk to the other older Mac
    Boot from the retail Snow Leopard installer
    Install on to the external disk
    Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
    You can now disconnect the Mac mini and boot from it as normal
    Note: While the Mac mini is connected in FireWire Target Disk mode to the second Mac, you could backup (if you don't already have a backup) any files you need to retrieve.
    If you don't have a suitable second Mac you may have to either borrow someone else's, or get the help of an Apple Store if one is in your area.

  • My Many Irritations (story) and a New Solved Problem (video playback)

    This topic is just going to ramble through the many things that have irritated me about my iPod since the purchase only three weeks ago. Don't get me wrong, though, I still love the thing. For the most serious problems, check out Numbers 3 and 11.
    Lets see... where to begin...
    I originally had no interest in the iPod, but some time after the unveiling of the fifth generation's new capabilities a friend of mine started talking about it quite a lot. And so, some time in early November, my hype for the video iPod had grown greatly. I downloaded Videora iPod converter and started converting music videos like crazy.
    By the time December rolled in I had successfully converted almost all of my 150 or so music videos and imported them into iTunes. With Christmas coming up I was wondering if I should just ask for it as a gift, but impatience set in and I bought it on the fifth of December, and have greatly enjoyed it since.
    Sounds peachy, but there's a fair bit that I left out.
    Number 1. I love viewing movie trailers on Apple's website. But with the recent update to the quicktime software, it was required to get the updated version. With that came iTunes, a program that was at the time unwanted and an irratation.
    Number 2. Videora iPod Converter has it's fair share of bugs. While I successfully converted many a video with it, I found it would 100% of the time fail to convert files of the .wmv format (Windows Media). As well, I would later find a more serious problem.
    Number 3. On the first day of using the iPod I had a serious error. I had been watching videos just fine all day, and the iPod was working perfectly. I then chose a video to play and inexplicably the iPod froze. These are the symptoms: black screen, backlight on, no responce from controls.
    Tired, as it was the end of the day, I was unwilling to go to the computer room and attempt to find a solution online. And so, I gambled that the backlight would drain the battery and hoped that upon a recharge, everything would be fine. As the backlight was illuminating my bedroom, I put the iPod in it's sleeve to dim it a bit and went to sleep.
    As you can imagine, this was kind of scary. I was afraid that I had bricked my iPod on it's first day.
    In the morning, the battery had died and I was able to recharge it by syncing it with my computer. After charging, I tried a few videos and then tried the offending video. Again it froze, but this time I was confident that the backlight would drain the battery and it would be fine.
    I then looked at the folder wherin I had saved the converted video. Among all my other videos was the offending one. I played it in Quicktime 7, and everything was fine until I realized the length of the video was double what it should be. After what should be the end of the music video came two minutes of a white screen. The file size was also abnormally large, compared to the other videos.
    It turns out that Videora iPod Converter can sometimes produce corrupt files, and these corrupt files will not be detected by iTunes as corrupt. Such files can be trasferred to iTunes and to your iPod without any error or problem, but will lock up your iPod when played. Now, when converting batches of videos with Videora, I scan the file-sizes to see if any are abnormally large; after all, using the same settings on a batch of similar in length videos should produce files of similar size.
    It occurs to me now that the method for resetting the iPod might have worked as an alternative to draining the battery.
    Number 4. I should mention that the battery life on this thing was (for me) unexpectedly low when playing videos. I'm not saying that mine is defective or anything, but I just found that the battery runs down pretty quick when playing videos; quicker than I had thought it might. Not a big problem, though.
    Number 5. In a search to find something to convert my .wmv videos to an iPod compatible format I found the ImToo converter. It works quite well, but the trial version is limited to videos of five minutes or less in length. I'm considering paying for the full version, but if someone knows of another reliable .wmv converter, I'd be glad to try that. For now, ImToo is good enough as most music videos are less than five minutes long, but I do have some other videos in the .wmv format that I would like to transcode.
    Number 6. In mid December I went out of town for three days. Of course, I brought along my new favorite portable media player. Not surprisingly, the battery soon ran low and I was without my computer to recharge it. So I went out to a store and bought Apple's official USB Power Adapter. I thought it was kind of expensive, especially considering that they used to be BUNDLED with the older iPod models, but I was happy to find I would now be able to charge my iPod. Wrong. Something that was not made obvious to me by the package description (if it is even mentioned there) is that the darn thing needs the USB cable that came with the iPod. It does not come with one, and so if all you have is a wall socket, the USB Power Adapter, and an iPod, you're screwed. Unless it's the iPod shuffle, which apparantly is the only thing that works with the USB Power Adapter out of the box. As far as portability goes, I feel this hurts. I would have liked to keep my USB cable attached to my computer. After all, it is a pain to get to the back of my computer and keep plugging it in or unplugging it.
    Number 7. I'm rather irritated with certain aspects of the iPod's interface considering music videos and regular song files. I spent a good amount of time adding artist and album tags to all of my music videos. These tags make sorting the videos in iTunes much easier.
    First, the iPod's interface does not allow for the search of videos through album tags, but does through artist tags.
    Second, going to Music>Albums> gives a long, cluttered list of Albums because of all of my music videos and one-hit songs that belong to only one album each.
    I suppose there is a workaround.
    Number 8. I recently bought another accessory for my iPod. The LOGiiX Amplified Fold-Up Speakers. A very attractive and portable set of speakers for the iPod. It comes with a little stand that holds the iPod in place, and works off of either 4 AAA Batteries or AC Power. Yet again, this is a product that DOES NOT come with the power adapter. Now, I think I MAY have one somewhere in my house... perhaps the power adapter that CAME WITH my SONY MD that is being replaced with the iPod will work....
    Oh, and that little clip-on stand I mentioned? I expect it to be lost soon because when I fold up my portable speakers there is no way to clip the stand onto the outside of the speakers.
    Now, as far as portability goes, I have to carry with me (at the most) seven things: the iPod, the headphones, the USB connector, the USB power adapter, the fold-up speakers, the little stand, and an AC power adapter.
    Number 9. Minor irritation in my control of the clickwheel. After this long, I still accidentally select the wrong thing, and often take a fair time to get the highlight where I want. Meh, this one I'll figure out eventually.
    Number 10. There was something irritating about entirely forgetting my login for my Apple ID and having to create this brand new one for today.
    Number 11. Just today, I have come across a problem with the video not playing. I watched one video just fine, went to the Videos>Movies> tab and, as mentioned above, accidentally highlighted a video I did not wish to play and hit the Select button. Normally when this happens I wait until the video has loaded - when the screen goes black and the white Play symbol appears in the top left. But this time, I immediately hit the Menu button to go back to the Movies tab. The video's loading was interrupted and I went back to the Movies tab.
    Now, when I select and play ANY video, after a noticable but short wait the screen goes black, another noticably longer wait and the play symbol appears, and then a black screen for a few seconds and the iPod skips ahead to the next video, which behaves in the exact same way.
    I have powered down the iPod using the method of holding the pause button, but the problem persits.
    My music videos can be played as songs by finding them under the Music tab, but no videos play as videos.
    I am not at my home computer, and so running iPod updater or just trying to sync is not an option right now.
    I will soon try to reset the iPod using the method described on Apple's support website.
    EDIT Okay, the reset did the trick. Videos are playing fine now. I still want to share my iPod story, so I'll leave this here, but have changed it from being a question. Below are the instructions I followed for the reset.
    RESETTING THE IPOD
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.

    Nice Rant session:
    "It turns out that Videora iPod Converter can sometimes produce corrupt files, and these corrupt files will not be detected by iTunes as corrupt. Such files can be trasferred to iTunes and to your iPod without any error or problem, but will lock up your iPod when played. Now, when converting batches of videos with Videora, I scan the file-sizes to see if any are abnormally large; after all, using the same settings on a batch of similar in length videos should produce files of similar size."
    What did you expect for freeware? Nice effort but because it's free everyone thinks it's a gem. It's not. This web site has been flooded with questions that should be directed at the authors website. Video conversion and editing is not for the beginner. Sounds to me that you have a bunch of badly converted videos that are causing a lot of problems. Videora problems:
    Known Bugs
    Audio/Video sync
    Problem - Output files can be out-of-sync. While no set pattern has been established, it seems to be more frequent with input files of 23.976 fps, non-DVD rips, and WMV/MPG filetypes.
    Workaround solutions - Try the custom option '-async 1'. If the disconnect gradually increases over time, setting 29.97 fps sometimes gets rid of the problem regardless of the input fps. You can also use AviSynth to assume the FPS and have the audio sync to that. If it's a sudden disconnect, check your VOB Cell settings in DVD Decrypter settings per this thread. Otherwise, test with an AviSynth script per the DaProphecy's method in the FAQ. For non-DVD files, PSPVideo 9 may be a good short-term solution until the converter stabilizes some more or try something like AviDemux.
    Audio track not getting picked up
    Problem - The IFO stream rip is fine, but the converted file has no sound. The debug info showed to audio track getting picked up. The most obvious case with this is the Madagascar DVD.
    Workaround solution ideas - Test with an AviSynth script per the DaProphecy's method in the FAQ (untested). Use a different DVD ripper.
    Program doesn't start (.NET issue?)
    Problem - Converter errors upon starting with an extended dump.
    Solution ideas - Update .NET framework (in all languages you're using!) to most recent solution. Clean out registry. Neither of these have worked for some.
    Progress meter incorrect
    Problem - During transcodes, the progress meter can be incorrect; thus, transcoding continues after the meter hits 100% and time remaining is zero. People have been seeing this more often with VOB files and/or the H.264 codec.
    Workaround - Figure out the length of your movie in seconds and compare that to the 'Processed' field. A 2-hour movie will not finish until Processed hits 7200 seconds.
    Artifacts (bad video quality) in darker scenes
    Problem - Scenes with darker background colors tend to have more artifacts (blocked video). It's much more obvious on the iPod, so this may be an Apple firmware problem.
    Workaround ideas - Use a VBR setting (FQ->VBR, two-pass A->VBR) to improve video quality. The custom option '-mbd 2' might help.
    Desktop icon
    Problem - When installing, the desktop icon does not appear/stick when using lower color setups.
    Workarounds - Select a 32-bit color scheme in your desktop settings, or change the icon in the shortcut.
    Profile changes don't always stick
    Problem - If you make a change to a profile, click apply, and immediately trancdoe with that profile, the transcode might not use the new settings.
    Workarounds - Once you click apply, swtich to another profile and back again to make sure the change is still there. If that doesn't work, create a new profile.
    Can only install/use with admin rights
    Problem - There have been reports of non-admin users not being able to use the converter.
    Workarounds - Separate installs or give all users admin rights.
    Who in their right mind would use a program that has these many critical bugs to convert files for the IPOD. People who are cheap, kids with no money and people who are just plain gullably.
    A little research and downloading a trial from this site would have solved your video problems early on;
    http://www.divmm.com/
    The 5th Gen IPOD was designed to support video content that was purchased on the ITunes web site. For everything else, you are on your own.

Maybe you are looking for