My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Hi, I am using and Iphone 4 with OS 4.2.1, I recently started facing issues with my iphones earpeice. It acts as if the earphones are still connected. I have tried plugging in and out the earphones several times as per several posts confirming a fix for the issue, however i am still facing the problem. Please suggest..!!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

Similar Messages

My ipad reacts slow on touchscreen. I have to really puss an icon to select it, and then tap it several times. Scrolling is impossible. And there is a voice with names all the actions I do / the buttons I touch. I have done a hard reset and itunesrecovery

My ipad 2 does not react well to the touchscreen. I have to push the icons really firm (kind of selecting it) and then tapp them several times before something happens. And a voice tells me what buttons I touch. I have don the hard reset and a recovery through itunes. But the problems stays. Has anyone had the same set of problems? DirkiedH

You have VoiceOver turned on. To turn off:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Triple click the Home button should allow you to go to Settings>General>Accessibility and turn it off. Scroll with three fingers if necessary.

TS1538 I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions

. I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions?

Hello Alexdad,
We've an article that can help get your iPod Nano working with your computer.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen

Media Encoder saying "The Adobe Product that installed Media Encoder has not activated"

I'm using Captivate 6 and one of the applications installed alongside this is Adobe Media Encoder. I've recently moved to a new Laptop. I de-activated Cap6 on the old one and sucessfully reactivated it on the new one. However, when I try to run Media Encoder on the new laptop I get a dialog box stating that "The Adobe Product that installed Media Encoder has not been activated". Does anyone know how I can resolve this?
Mike

nominder,
Start by making sure your products are updated to the latest versions. Launch Premiere Pro and choose Help>Updates. Do all the updates (if any) and restart the computer.
As far as AME is concerned, you were one click shy of your desired goal - hitting the start button on AME. AME works in the background so you can keep working in another Adobe application. So the workflow is thus.
within Premiere Pro - file>export media
choose correct settings for your output type and click ok
AME launches and ques up the render - click start...
Hope this helps,
Dennis

Hello, My old email address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the pa

Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!

This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG

The update to osx 10.8.2 has not taken effect, showed it downloading but did not restart and why is the update still available?

the update to osx 10.8.2 has not taken effect? it showed it downloading the update in the app browser but did not restart of its own accord or take me to the grey screen it describes. after restarting myself it still says the upgrade is still available? and iphoto does not work as it needs 10.8.2 to work!
what am i not doing right? this could well be me being thick. so any help would be much appreciated.

Welcome to the Apple Support Communities
Download OS X 10.8.2 > http://support.apple.com/kb/DL1581 Finally, install that and go to  > Software Update to install 10.8.2 Supplemental

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed.

I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings general about the network tab says unavailable. how can i fix this

I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings>general>about the network tab says unavailable. how can i fix this

Can you make and receive calls and texts? If you can, I wouldn't worry about it. If you can't, you may need to call Verizon. However, try this first. The 4S has a Vodafone SIM card in it for foreign travel. Try taking the SIM out and doing the *228 again. Once it activates properly, you should be able to put the SIM back for safe keeping. It's not used in the U.S.

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!

Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out?

The Adobe product that installed Media Encoder has not activated

My Adobe Media Encoder CS4 was working perfectly.
I even exported a video one morning and that same afternoon it refused and gave me the following message:
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
I reinstalled a couple of times, but nothing changed.
I uninstalled and installed CS5, it launched once then gave me the same message all over again.
I even tried to install it on another computer and it's giving me the same result.
I have been working on this video more a month, and I can't even export it.
Can anyone help ? I have a deadline to meet
Thanks a lot

Hi, I've just been having the same problem but on my mac!
I have been trying to use XDCAM EX converted Mov files on my new MacBookPro with CS6. I have just completed the installation of ProRes Quictime codecs, but when I went back to try to re-open my Adobe Media Encoder, (that I was using without problem around an hour ago), I now get the same message that The-Jade was getting
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
Any ideas?
Thanks,
JAK

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

Can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

can't open i tunes on my computer. I get the message "This version of i Tunes has not been correctly localized for this language..."

I'm on a PC and have uninstalled an re-installed Itunes.That sorts out Windows but knocks out the network adaptors which means i can't get onto the web! So its either no iTunes or no web it seems. I've fully updated Windows andam now scratching my head. Any ideas are welcome. Thank you

After restoring Windows I tries to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.' how do I do this?

After restoring Windows I tried to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.
What do I do? I don't want to lose my entire liberary!

Hi there computerfailure,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W.

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
I hope there is a fix for this, cause it *****!!!!

My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Similar Messages

Maybe you are looking for