My edit page in in elements 9 has suddenly stopped working. How can I get it to the workspace?

My edit page in in elements 9 has suddenly stopped working after over a year. How can I get  the workspace to open?

You can try Restoring it in iTunes. If that doesn't work you will need to get it serviced.

Similar Messages

  • HT1212 my home button has also stopped working how can i get device in recovery mode.

    i was wonding if there is a way to get a iphone 4s into recovery mode with a non functioning home button?

    Unfortunately the only way to put the iPhone in recovery mode is by using the home button. If it is broken you won't be able to do this, I'd suggest to get the iPhone replaced by Apple.

  • My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

    I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

    Did you tried uninstalling and then installing it again?
    Ankush

  • PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

    PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

    Thanks for the quick response ...
    I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
    I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
    Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

  • My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
    iOS: Not responding or does not turn on - Apple Support

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • ICal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

    iCal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • My reset/sleep button on my iPhone 4 has just stopped working, how can I fix this??

    My reset/sleep button on my iPhone 4 has just stopped working , how can I fix this??

    Hi Hamish1P,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed is not working. I would recommend that you read this article, it may be able to help the issue.
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Mario

  • Bluetooth on my iMac has suddenly stopped working! no icon and not in the preferences anymore? tried turning off etc. can anyone help?

    Bluetooth on my iMac has suddenly stopped working, no icon top right and unavailable in preferences! Tried turning off etc
    Help!! Thanks

    Please carefuly read and methodically follow the instructions in Apple's Troubleshooting wireless mouse and keyboard issues located by clicking  http://support.apple.com/kb/ts3048

  • HT1338 built in camera has stopped working, how can I update or reinstall the drivers

    Built in camera has stopped working, how can I reinstall the respective drivers?

    Here are my best suggestions for your camera problem, Stephen:
    •  If you have not already done so, shut down Mac, restart,
        and try again.  If the camera still does not work, continue.
    • Try ALL relevant suggestions from Apple's Troubleshooting
       article: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       If you need to use the "reset" suggestion, use the correct reset for your Mac.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update.  For your Mac OS,
       the current version is at http://support.apple.com/kb/DL1640
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
    • If nothing else resolves your problem, yours is likely a hardware issue.
       Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • My change to small screen facility has suddenly stopped working. Can anyone help as I use this a lot.

    the change to small screen icon in top right hand corner of screen has stopped working. Can anyone help.

    When you use the maximize/restore button, the window is restored to its last size. Some websites use a script to enlarge the window to its maximum size so when you switch from maximized to restored you hardly notice any change. You may have to manually resize the window by dragging the lower right corner. Does that help, or is the button just completely not working??

  • HT4061 My iPhone5 suddenly stop working, what can I do to resolve the issue?

    I don't know what to do my Iphone 5 just suddenly stop working, wont turn or anything.

    Hi The Great One 365,
    If your having an issue where your iPhone 5 won't turn on at all, I would take a look at the Power/Battery troubleshooting in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    - Brenden

  • AirPrint has stopped working - how can I get it to work?

    Yesterday morning my HP110a stopped working with airprint. iPad and iPhone 4 with iOS 4.3, having worked fine before, suddenly cannot find the printer on the network.
    Using Safari, I can access the printer's webpage from the iPad and iPhone, my MacBook Pro finds the printer with Bonjour, and prints to it no problem, ePrinting works fine - but AirPrint doggedly refuses to work - 'No Printers Found' being the constant message.
    I have been through all the troubleshooting points - checked network, checked all software / firmware is up to date, even updated iOS to 4.3.1 to no avail.
    The need to print from the iPad is urgent - as the MacBook pro isn't in the house much. It worked so well till yesterday. Help.

    Just to clarify, it only works when the phone is plugged in and charging. What happens when you try to activate it? Is there any error message?

  • Photoshop elements 12 editor stopped working.how can this be fixed.i have windows 8.1 OS.

    photoshop

    Could be the installer failed to set the correct permissions on the two folders in your user profile where the prefs are written. If you log in on the PC using a different user account, does ID work?

  • My iPhone 5s's camera and flashlight suddenly stopped working.How can i fix this?

    I've tried resetting the phone, its settings, turning off the phone, the voiceover thing, and nothing works at all.

    Hello there, wicky1096.
    The following Knowledge Base article offers up some practical troubleshooting steps to try when an application is not working as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    If the issue persists, you may then want to do the following:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for