My eMac has USB 1.1 only am I screwed?

Hello,
I just received my ipod Touch and my eMac only has a USB1.1 port. Am I screwed? Is my new iTouch useless now?
I tried to connect it to iTunes 8 and got this message.
Itunes could not connect to the ipod because an unkown error occured OX E8000001

Well the answer is YES! It can work with USB 1.1. For some reason the iTouch just needed to try to connect a few times before it finally did.

Similar Messages

Is there a way to live capture in FCP X? I use a SONY NX 70U. It only has usb 2, HDMI and the weirdo sony protocol.

Is there a way to live capture in FCP X? I use a SONY NX 70U. It only has usb 2, HDMI and the weirdo sony protocol. If not with THIS camera as I have described, is it possible with any other cameras?
Thanks.

Is there a way to live capture in FCP X? I use a SONY NX 70U. It only has usb 2, HDMI and the weirdo sony protocol. If not with THIS camera as I have described, is it possible with any other cameras?
Thanks.

HT1459 Myipod touch has frozen! Will only show a USB cord pointing to "itunes" CD symbol. Computer says my device has malfunctioned. Tried to reset, but didnt help

My ipod touch has frozen! Will only show a USB cord pointing to "itunes" CD symbol. When I try to plug it in, my computer says that it cannot recognize my device due to malfunction. Tried to reset the ipod twice, but didnt change anything.

- Try another cable as yu siad
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

[Solved] USB 3 (uPD720200) only detects devices at boot time.

Hello. I have an HP Probook 4530s laptop with an onboard USB 3 port. A device that is plugged into it before boot shows up in lsusb and can be used normally, but hotplugging a device will not work.
Relevant outputs after booting with a drive plugged in, unplugging and plugging it back in:
$ lspci | grep "USB 3.0"
26:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
$ lsusb | grep "3.0"
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
$ lsusb | grep "LaCie"
(a distinct lack of drive)
$ dmesg | egrep "xhci|usb 3"
[ 0.735878] xhci_hcd 0000:26:00.0: xHCI Host Controller
[ 0.735887] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 2
[ 0.736076] xhci_hcd 0000:26:00.0: irq 19, io mem 0xd4500000
[ 0.736149] xhci_hcd 0000:26:00.0: irq 46 for MSI/MSI-X
[ 0.736156] xhci_hcd 0000:26:00.0: irq 47 for MSI/MSI-X
[ 0.736162] xhci_hcd 0000:26:00.0: irq 48 for MSI/MSI-X
[ 0.736460] xHCI xhci_add_endpoint called for root hub
[ 0.736462] xHCI xhci_check_bandwidth called for root hub
[ 0.736574] xhci_hcd 0000:26:00.0: xHCI Host Controller
[ 0.736578] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
[ 0.739804] xHCI xhci_add_endpoint called for root hub
[ 0.739806] xHCI xhci_check_bandwidth called for root hub
[ 1.443390] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.459034] usb 3-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 484.575852] usb 3-1: USB disconnect, device number 2
Any ideas?
Last edited by codl (2012-12-06 16:30:09)

I have the exact same usb controller and it seems to be very buggy in linux. The output of lsusb sometimes shows 2 usb 3.0 hubs, sometimes 1 usb 3.0 hub and often no usb 3.0 at all. Also it shows a lot of usb 1.1 controllers, but my mainboard only has usb 3.0 and 2.0. Hotplugging usb 3.0 devices works, but they only run at usb 3.0 speeds and booting with plugged devices often makes them dissapear.
I recently searched for the issue and found out flashing the usb controller firmware could possibly help.
http://askubuntu.com/questions/161862/n … untu-12-04
However you have to download the driver from a third-party website and boot a dos operating system to do the firmware flash, which held me off from doing it.
Last edited by teateawhy (2012-12-06 13:08:02)

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

No you can not.
You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus. Here is my issue. On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus.
Here is my issue.
On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus was it charged the phone as well. All worked great.
Now with the 6 Plus, neither of things work. The message on the radio (Kenwood) says I Pod error. The message on my phone say's "this device is supported".
I have called on this before and was told you are aware and that the issue will be addressed in a future update. There have been several updates on IOS 8 and the issue remains.

I have a Kenwood KDC-X695. When I purchased this stereo and had it installed, I had an ATT iPhone 4.
It worked with the stereo, but had a few issues. I had purchased a few audio books that I would listen to while driving. When I plugged it in it would immediately begin to play the book from the beginning or if I had been listening to music, it would start playing the song that was at the top of the song list.
The stereo came equipped with Firmware version 3.05. I upgraded to the iPhone 5 a year later. I had that phone for approximately 2 years. The song or book issue remained the same.
I just recently upgraded to the iPhone 6 and the Bluetooth function still works, however the USB port on the stereo that the phone plugs into to allow files on the phone to play through the stereo no longer works.
I contacted the service provider (Verizon) and after speaking to several different technical support technicians, they provided me the phone numbers for Kenwood and Apple because they were unable to help me.
I spoke with Kenwood technical support the following day and after a few fumbling miscues from the technical advisor, it was suggested that I upgrade the firmware, even though the Kenwood literature warns against this if the Bluetooth portion is working, because if there is a problem with the upgrade, it can render the Bluetooth useless and non-functional. The advisor did suggest the latest firmware on the second or third attempt, after I pointed out what I was able to glean from my initial search.
Later that day, I went back to the Kenwood site (from their homepage) and by using their selection tools, discovered that this particular model was only ever intended to be used with the iPhone 4S (the technical advisor was not aware of this, even though I mentioned this during my phone call earlier in the day). According to the Firmware selection tool, my iPhone 5 should not have worked with it.
I performed the Firmware upgrade, and it took 13 minutes. This was less than the 15 minutes that was forecast in the Kenwood literature. The Bluetooth still works but the USB cable connection still causes the unsupported device message that I received prior to the upgrade. I am incredibly annoyed and disappointed.
By upgrading to the iPhone 6, I have three choices; (1) only use the Bluetooth for phone calls without the ability to play other files from my iPhone 6 (2) forced obsolescence of my stereo, requires buying a new stereo (3) return my iPhone 6 and go back to my iPhone 5.
I do not believe that I should have to be a software/Firmware/hardware engineer, vetting every single device that I own; prior to upgrading a cell phone.
I am incredibly annoyed with Apple at the moment.
I have a separate Bluetooth headset that worked with both my iPhone 4 and iPhone 5 that the iPhone 6 simply does not recognize. That is another story for another time.
Currently, I am incredibly underwhelmed with Apple.

IPod USB 2.0 only ( with dock to USB/FW Cable ) question

Hi
I at last want to buy me an iPod but ...
Since the iPods are USB 2.0 now & my Mac has USB 1.x & FW 400 , you understand for using the iPod as an external & preferred bootable HD I need a FW connection to the Mac ( for data transfer ) & if i read correct this splitter cable only uses the FW for loading the iPods Battery. If so this means i still need to connect via USB for music / data transfer & the bootable HD option ain't there .
I really want to clear this out cause if this info as i just provided it , this will make the iPod less interresting to me & iPod mini doesn't support a camera / mic connection which also makes that less interesting.
At the end if above info is correct i rather wait to buy an iPod together with a new Mac ( do new Mac's with usb 2.0 support bootinf from a usb 2.0 HD ??? )
Please answer this asap cause i need to tell the person what gift i want & god i want to tell him " Just get me that iPod " ( it's in the right pricerange )
thx

Hello....I just purchased a brand new iPod 20gb color photo last night and I have a couple questions myself, relating to this topic.....
I have a first generation scroll wheel iPod that this is replacing but I still have all the accessories from the first generation iPod....do you know for certain if the charger from way back then will work with the brand new iPod....I know the actual firewire cable is different because of the dock connector but if I purchase one of the new firewire cable w/ dock connector can I use it with the old charger (brick)

USB 3 (uPD720202) only detects devices at boot time.

i have a HP Microserver with installed this PCI-E Card
http://www.amazon.it/gp/product/B0077VC … UTF8&psc=1
the output of
lspci | grep "USB 3.0"
02:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
my problem is similar to this https://bbs.archlinux.org/viewtopic.php?pid=1203515
you know how I can fix?
thanks at all
p.s sorry for by very bad english ((

I have the exact same usb controller and it seems to be very buggy in linux. The output of lsusb sometimes shows 2 usb 3.0 hubs, sometimes 1 usb 3.0 hub and often no usb 3.0 at all. Also it shows a lot of usb 1.1 controllers, but my mainboard only has usb 3.0 and 2.0. Hotplugging usb 3.0 devices works, but they only run at usb 3.0 speeds and booting with plugged devices often makes them dissapear.
I recently searched for the issue and found out flashing the usb controller firmware could possibly help.
http://askubuntu.com/questions/161862/n … untu-12-04
However you have to download the driver from a third-party website and boot a dos operating system to do the firmware flash, which held me off from doing it.
Last edited by teateawhy (2012-12-06 13:08:02)

Does 645E Max/Ulta has USB 2.0 ?

Hi, I just bought a 645E Max / Ultra MS-6547 Ver 2 MoBo.
It came with the Led D-Bracket. The reseller told me that it has USB 2.0 onboard. But the manual only mentions USB and is not specifiv on USB 1.1 or USB 2.0. Does this MoBo actually has USB 2.0 onboard? Thanks, Velti

On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M
and 2.88Mbytes.
- 2 serial ports (COM A + COM B).
- 1 parallel port supports SPP/EPP/ECP mode.
- 6 USB ports (USB 2.0 Controller by SiS®962L SB)
- 1 IrDA connector for SIR
- 1 audio/game port

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

I am trying to purchase an app and update my apps all are free but it won't accept my security code, all itkeeps saying is that my payment method has been declined, I only have one card so can't try another

I am trying to purchase an app and update my apps all are free but it won't accept my card, all it keeps saying is that my payment method has been declined, I only have one card so can't try another. Now I can't use some of my apps because they are waiting to be updated. Somebody please help!!

Hello Sriggers,
Welcome to the Apple Support Communities!
I understand that you are attempting to update some applications on your iPhone but the payment method was declined. In this situation, I would recommend reading over the information in the attached article to help resolve the situation.
Pay an unpaid balance in the iTunes Store - Apple Support
Best,
Joe

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

My iPad camera photos will wirelessly sync with my iMac and iCLoud photo stream, but the videos do not, is USB connection the only way to transfer videos or is there also a wireless method?

My iPad camera photos will wirelessly sync with my iMac and iCLoud photo stream, but the videos do not, is USB connection the only way to transfer videos or is there also a wireless method?

Videos are not included with the Photo Stream. Photo Stream is for photos only.
There is not a wireless method for importing videos from the iPad's Camera Roll.

TS2529 Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Hi,
The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
Neither of these two account can be deleted. (even if not being used)
If you then press the + icon to add you will get the choices you posted.
To iMessage you need to "register" and Apple ID with the iMessages service.
As Diane then points out you can link this to your iPhone number.
This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
You can then chose on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
I have my Mac version set to start from my Apple ID and the iPhone from it's number.
At this moment the Mac version cannot send SMS text messages to an iPhone.
This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
(Basically you add a phone number with country code +1 as a Buddy to your List)
Mocked up number (It not really an auto responder although you do get sent back and Error message about it not being valid)
8:37 pm Sunday; July 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

My eMac has USB 1.1 only am I screwed?

Similar Messages

Maybe you are looking for