My embedded Jotforms are not displaying on iOS devices

Just checking to see if anyone else has run into this issue. My embedded Jotforms display fine on desktop and Android devices, not any iOS devises.
Perhaps I missed a step somewhere?
Rentaleez - New Listing Form

I tried to check users forum and can see that multiple users have complained about this issue , have you tried to contact them ? If not then I would suggest you to contact them directly.
Thanks,
Sanjit

Similar Messages

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Games are not syncing across iOS devices

My games are not syncing across my iOS devices. Both my iPhone and iPad are running the same software and are linked to the same account. However my games don't seem to sync. Which is annoying if I'm playing a game on one device I have to start over on another. For example temple run does not sync. Anyone have any suggestions. I'm also having the same problem with infinity blade 2.

Game syncs only work for games that support iCloud. The game developer has to enable that feature. There are several games such as Jetpack Joyride and League of Evil 2 that support iCloud syncing of games. Unfortunately, other games like Temple Run don't do that since the dev never implemented that feature.

Appointments emailed from iCloud calendar in Outlook are not received on IOS device using exchange calendar.

I email tons of appointment invitations from my iCloud calendar in Outlook. Appointments synch to IOS devices and are on icloud.com. People receive invitations in Outlook and on IOS devices. My husband runs IOS devices with exchange calendars. He never receives the appointment invitations. All of the appointment invitations are on his iCloud.com account. Can he synch to both exchange and iCloud? WIll this allow him to see the invitations I send that are hung up in iCloud?

Could be a corrupt item, this usually fixes it if that is the case
Backup device then in Outlook
highlight calendar
goto file import/export
choose export to file
choose Persoanl folder pst, next
make sure calendar is highlighted and choose subfolders if you have them, next
save to desktop with a name you can remember, Finish
Click ok on screen popup
Go to view, arange by events
delete all entries.
close outlook and any word files, open outlook back up after 15 seconds.
Then
goto file import/export
import from another program or file, next
choose Persoanl folder pst, next
find the file and import
Choose highlight calendar and Finish
Change view back to what you want and try again.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Changes made on a mac (iCloud drive) are not reflected on IOS device?

I have installed Yosemite and have flicked on 'iCloud Drive' - I am not able to see the changes that were made on a mac being reflected on the IOS IPAD device. I can however see these reflected changes on my iPhone?

As far as I understood there is no such an app like "file manager" for the icloud drive. So its impossible to access your files from your iOS8 device..!!! Amazing ah!!! Therefore you CAN'T read .pdf files!!!. ibook doesnt work for that job. Another surprise in the post-Jobs Apple!!
Apple sometimes hurts much!!
<Edited by Host>

My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

Notification widgets are not displayed - iOS 8

Hi community,
i have a problem regarding the new widget feature in notification center.
Although activated, Wunderlist and Apple's own reminders app (I hope it's called like that, as it has a different name in Germany) are not displayed. It is not like this happened right from the start but since I deleted one of my list in reminders, I'm not able to display a new one in notification center.
With Wunderlist it's a similar behavior. When I first activated it, it has been displayed. The problem was that I had just installed the app and didn't even log in. Therefore I opened Wunderlist via notification center, but wasn't able to log in. Subsequently I shut it down, no change. So I deleted the app, downloaded it again and logged in. Since then, Wunderlist is gone from notification center (although activating again).
Any suggestions?
Thank you in advance!
Tim from Germany

hello
I am using iphone 5 having ios 8 .. my notification center widgets are appearing but are not updated automatically ..
If you have any solution then please share ,,, I did restoring my device and installed fresh ios
so is it a network issue, ios issue or application issue?

Scientific fluorescence figures are not displayed correctly on iPad

I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
I am really disappointed. So, is there any solution?
Many thanks.
On MacBook Pro
On iPad 1

I am woundering if anyone can suggest any solution? Thank you.

ICamera photos are not displayed in iPhoto

HI!
I have a big problem: Whan I make photos with the included camera in my iPad,
these photos are not displayed in the iPhoto app supplied with my iPad. I can't find
them.
I'm using IOS 5.0.1.
Any help? PLEASE!!!

After you snap the photo with the iPad, and that picture shrinks down to the corner, you should ba able to tap that little picture - and it should open in the Camera Roll in the Photos app.
I'm not sure what to suggest other than the basic, first try, troubleshooting steps.
Quit the camera app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Video chapters are not displayed anymore

Since a lot of weeks and many ios updates the video chapters are not displayed anymore. The thumbnails disappered and the chapetr names are gone.
Before ios 5 both did work.
Is there a solution?
Thanks Hans

Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It remains the same with the video app in iOS 5.1.1, no chapter names.
Give Apple feedback and request chapter titles;
http://www.apple.com/feedback/ipad.html
Search for a 3rd party iOS video app that perhaps provides this functionality.

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Chinese characters are not displayed in the Firefox bookmarks

Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY

Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
      it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
      g_tabname_header TYPE slis_tabname,
      g_tabname_item   TYPE slis_tabname,
      gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01   = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item   = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
*   I_PROGRAM_NAME               =
    i_internal_tabname           = g_tabname_header
    i_structure_name             = 'ZVEND_HEADER'
    i_client_never_display       = 'X'
*   I_INCLNAME                   =
*   I_BYPASSING_BUFFER           =
*   I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = fieldcatalog
EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
*   I_PROGRAM_NAME               =
    i_internal_tabname           = g_tabname_item
    i_structure_name             = 'ZVEND_ITEMS'
    i_client_never_display       = 'X'
*   I_INCLNAME                   =
*   I_BYPASSING_BUFFER           =
*   I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = fieldcatalog
EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "build_fieldcatalog

Hi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    EXPORTING
     i_callback_program             = w_repid
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
     is_layout                      = wa_layout
     it_fieldcat                    = i_fieldcat
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
   IT_SORT                        = I_SORT
IT_FILTER                      =
IS_SEL_HIDE                    =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
     it_events                      = i_event
IT_EVENT_EXIT                  =
      i_tabname_header               = 'i_ekpo' <----
Pass here header table name
      i_tabname_item                 = 'i_eket'    <----
pass here item table name
I_STRUCTURE_NAME_HEADER        =
I_STRUCTURE_NAME_ITEM          =
      is_keyinfo                     = wa_keyinfo
IS_PRINT                       =
IS_REPREP_ID                   =
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                =
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      t_outtab_header                = i_ekpo   -<<----
Pass here header internal table
      t_outtab_item                  = i_eket     <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun

My embedded Jotforms are not displaying on iOS devices

Similar Messages

Maybe you are looking for