My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

my eprinter will not print in proper in  colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.

Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • Re: Not printing black ink after new ink cartridge installed (HP Officejet Pro (edited)

    Well 1 to 2 years later I have the exact same problem described by the posters with my OfficeJet 4020.  My black printing started to deteriorate as the cartridge went empty, put in the same HP cartridges I have been buying at Costco since I bought the printer there 2 years ago, first new black cartridge printed poorly then just started to come out blank as described above.  Put in second new cartridge  Also ran all the cleaning and alignment tests and functions. no improvement and no malfunction found. While doing this I used up the three color cartridges which printed okay, it was just the black. Even went out and bought a third new cartridge from Staples to make sure the Costco ones weren't just bad.  This HP replaced a Canon that lasted for ages and it's a problem already.  
    Did anyone ever find a solution to the HP black cartridge blank printing problem? 

    What is the model of your printer - there is not an Officejet 4020 that I can find.  Is your model an Officejet 4620?  If so I suggest you call HP support regardless of warranty as described in the post here.  If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer MX410 will not print but a few copies after new cartridge is installed.

    Somewhere I read that there is a solution to reset the printer.  However, I don't remember what or where it is.  My printer is almost a year old, is not connected to a computer but used just for copies. Therefore network and computer problems are not a factor.  Error message comes up after printing 9-10 copies.  A new cartridge does not solve the problem, nor does resetting.
    Any help would be appreciated.

    Hi Louisegberg,
    Please try turning the printer off, and unplugging it, for at least ten minutes.  If the error returns, please let us know which error code you are running into, and we'll be happy to further assist!
    If this is a time-sensitive matter, additional support options are available at Contact Us.

  • Not printing black ink after new ink cartridge installed (HP Officejet Pro L7555)

    I have an HP Officejet Pro L7555 on which I just replaced the black ink cartridge.  Now it won't print in black at all.  I have tried cleaning the printhead multiple times to no avail.  I only get printouts of boxes in all colors except black and nothing else written on the page at the end of each printhead cleaning cycle. 
    When I print the Self Test Diagnostic Page, it comes out in Magenta instead of black.  On this page, it shows that both printhead are in good condition.  The ink level on the black ink cartridge is shown to be full as would be expected for a newly installed cartridge. 
    I have replaced other cartridges on this printer before, and have not had this issue.  Could anyone please help?

    Thanks, garytech1.  I have seen the document.
    Solution 1. I have used and am using only genuine HP cartridges.  The one I recently replaced was black.  I have replaced the other colors before without problems.  
    Solution 2. I am using the correct type of paper. There are no streaks on the printouts.  Any printing I try from a document with black text comes out blank. The only two types of printouts I have obtained are:
      a. The Self Test Diagnostic Page, which comes out in magenta and it has no streaks.  It also lists the status of the printheads as being good.
      b. The printout that follows a printhead cleaning that has all color boxes except black. There are no streaks here either.
    Solution 3. I have checked the print settings (I have Windows XP SP3) and they are all correct.
    Solution 4. I have printed the PQ Diagnostic page and it is all blank except for some colored boxes.  There are no streaks in them.  No grey  boxes appear.
    Solution 5. There is nothing wrong with the images or documents I am trying to print.  
    Solution 6. I don't see why I should have to spend $70+ to replace the black/yellow printhead when:
      a. The yellow color comes out fine in the colored boxes
      b. All the diagnostics (the ones that are in the installed software as well as the ones I obtained from the HP website) all show the condition of both printheads to be good, and
      c. When all printing was working just fine before I replaced the cartridge.  Is there a physical way to clean the printheads since it appears from all of the above that it is the genuine HP ink that may have actually plugged it up?
    Thanks for your help!

  • After updating to Firefox 3.6.15, Firefox will not connect to the Internet, even after uninstalling and re-installing Firefox in my Windows XP environment.

    After downloading the Firefox 3.6.15 update, my problems began. Firefox would not connect to the Internet. When I rebooted my PC, Firefox said that it couldn't access any Web sites. I uninstalled Firefox, then downloaded and installed Firefox 3.6.15. I still have the same problem: Firefox will not connect to the Internet. I am running Windows XP, service pack 3. I never had problems with Firefox until I installed version 3.6.15.

    I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
    As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
    I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
    I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

  • Won't print alignment page or any page after new ink cartridges installed.

    I just installed a new color and a new black ink cartridge into my HP Envy 5531. I have never had an issue with this printer before, owned it for 2 years. After installing it, it tells me to print an alignment page, I press ok. The alignment page comes out only blank. So they cannot scan the alignment page. Now my printer prints like it's running low on ink, but it says that it's full with color and black ink.

    Hi @Aly9008,
    I would be happy to help you work towards a solution. I understand you have installed new cartridges, the levels are good (full), but your print quality is poor. Please use the following document to troubleshoot the issue; Fixing Print Quality Problems for the HP ENVY 5530 e-All-in-One and Deskjet Ink Advantage 4510 e-All....
    If the issue persists, I suggest calling us. Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. We will, at our option, either replace products under warranty that prove to be defective or refund the purchase price.
    We could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    Please use the thumbs up below if you happy with my efforts to help. Best of luck!
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Firefox 14.0.1 will not run on my computer even after unistalling and reinstalling and cleaning the registry, yet Firefox 9 runs fine why?

    As soon as I updated to Firefox 14.0.1 it would not start, I uninstalled and reinstalled several times, including removing almost all registry references to Firefox or Mozilla. As soon as I downloaded Firefox 9 it worked fine, I guess I will be waiting until and update that works.
    Windows 7, 64 bit, full updates, Webroot A/V, no malware. I don't so much as need a solution as I was offering up advice.

    Would you mind installing Firefox 14 again, and seeing if you get any crash Id's from it? there is a startup crash that we are investigating right now, and it seems similar to what you are experiencing.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • HT3176 my apple remote will not link to my appletv even after changing the battery

    my apple remote will not link to my appletv even after changing the battery.  can anyone help?

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My HP Photosmart c309a will not work.  I just had a new hard drive installed on my computer

    My HP Photosmart c309a will not work.  I just had a new hard drive installed on my computer

    Please download the driver from the HP website (that matches your operating system).

  • Printer not printing black even with new ink cartridge

    Responded to pop-up that ink was low. 
    After installing new black ink cartridge, attempting to print ink status report.  colors show OK but black is not printing at all.  Tried second new cartridge to no success. 
    Tried turning printer off and restarting - no change to problem.  still not printing black. 

    Hi,
    Please follow this HP document for this issue
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03946666&cc=us&dlc=en&lang=en&lc=en&product=408​...
    hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Eprint will not print from some email addresses

    My grandmother does not have a computer but we have been using an hp printer to email her documents that are printed onto paper for her to read. We had an HP photosmart that died this week and we had to get an HP envy instead.
    I changed the email address on the new printer to a similar one from the one we used before and changed the settings for printing to "open to anyone." Emails from our phones, gmail, yahoo or even my mom's work email address (which has tons of security) have all gone through fine but emails from my grandmother's church do not come through. They are not even registering on the collections to show that the email was sent.
    It is extremely important that I figure out how to fix this. Any ideas?

    Hi @turtle290 ,
    Welcome to the HP forum.
    I understand that ePrint jobs from the church are not printing.
    The fact that they are not arriving in collections leads me to wonder, do they have the correct email?
    It could also be something entirely different.
    The HP ePrint Print Job Did Not Print
    Let me know if that document was helpful.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Trying to print from my iMac to a Cannon MG5320 will not print.  Started having problem when new Wifi router??? was installed Cisco.  Keep getting A Communication Error

    Problems printing form iMac to Cannon MG 5320.  Just had new Cisco router installed and problem started.  Keep getting communication error

    To address this problem, I suggest that you do a complete reinstall and setup of the printer as if it were brand new. It is preferable to do this from the original CDs that came with the printer. I think the printer has to set up again to connect to the new router.
    The Canon web site has for this printer a "mini-master setup" file you can download that has the same setup program that came on the CDs.
    http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_ one_inkjet_printers/pixma_mg5320?selectedName=DriversAndSoftware

  • Firefox will not open on my computer, even after reinstall. Please help?

    I've been using Firefox for a long time and it's been working well. I'm on acer Windows 7. However now it will not open even when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe". Chrome or Internet Explorer work fine. I also reinstalled Firefox and it still doesn't work.
    Here's the id of my latest crash (from 30.4.2014): bp-4e981129-aea6-4b23-87a2-739b42140430
    Thank you for any help with fixing this.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    Profile Backup and Restore
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Installed Firefox on Mac (OS 10.5.8) Will not open a browser window even after rebooting. Also - Must "Force Quit" to exit Firefox

    I installed Firefox on my Mac today (Mac OS 10.5.8) However File>New does not open browser window. Nothing happens. I rebooted and launced Firefox again but this did not help. I had been using Safari. Firefox is clearly running and I must do a "Force Quit" to quit Firefox.
    == This happened ==
    Every time Firefox opened
    == I installed Firefox on my Mac today. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.17.8 (KHTML, like Gecko) Version/5.0.1 Safari/533.17.8

    Hello John.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    Also, you may be interested in this one:
    http://support.mozilla.com/en-US/kb/Firefox+hangs

Maybe you are looking for

  • Missing Adapter Engine in the XI Domain (in the RTWB view)

    Team, I am running at in a bizarre situation at a client site.  We have one SLD that is shared by 2 XI installations (a POC and a SandBox). In the POC (in run time workbench view), I can see all the XI component (integration engine, BPM engine, Adapt

  • Cluster logins and security

    I am new to SQL Server clusters for HA, but from a security angle, say for example you have 10 SQL Servers in the cluster, and Server 1 dies, do Server 2 takes on the databases in Server 1 - how are the logins in Server 1 carried over so users can st

  • Webdynpro application with multiple DCs

    Hi, I have an application where it is splitted in to multiple DCs for the team development. Now at runtime there are navigation happenening across DCs, means on click of a button in view1 of DC1, it needs to call view2 of DC2. What is the best way to

  • Copying Process chain in BW 3.5?

    Hi All, How do we copy a process chain in BW 3.5? Thanks in Advance.

  • Syntax to display a window as model dilog box

    hi, what is syntax to display a window as model dilog box