My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done?  Why did this happen, the overloading of the Time Machine?

Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up  more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

Similar Messages

  • TS1337 Seagte hard drive replaced by Apple....Restore can't see backup on Time Machine???

    Help...all was fine until this Seagate replacement.  Now, no data, no apps, it must be on the time machine but the iMac can't see it.  OS X 10.8.2 
    Thanks.

    This has been posted to the Leopard forum. You will get a faster answer from the correct forum.

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • Can't connect my external hard drive to my Mac Book Pro. Any thoughts?

    I have a 2.0 TB WD Mybookessential as an external hard drive to my Mac Book Pro and I'm getting a "The disk you inserted was not readable by this computer" message every time I try to remount it. Any thoughts?

    Thanks for the suggestion, Cattus, it is in fact a formatted disk with a lot of valuable data, so I do not want to reformat the disk.
    I followed your advice, however the repair failed because of an "invalid B-tree node size".
    This is the log:
    2011-12-27 17:03:33 +0000: Error: Filesystem verify or repair failed.2011-12-27 17:03:33 +0000:
    2011-12-27 17:03:33 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
    Filesystem verify or repair failed.
    2011-12-27 17:03:33 +0000:
    2011-12-27 17:06:35 +0000:           Name :           WD My Book 1110 Media
              Type :           Disk
              Partition Map Scheme :           GUID Partition Table
              Disk Identifier :           disk1
              Media Name :           WD My Book 1110 Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           574D415A4131363338333935
              Device Tree :           /PCI0/EHC1@1D,7/@2:0
              Writable :           Yes
              Ejectable :           Yes
              Mac OS 9 Drivers Installed :           No
              Location :           External
              Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
              S.M.A.R.T. Status :           Not Supported
              Disk Number :           1
              Partition Number :           0
    2011-12-27 17:06:35 +0000:
    2011-12-27 18:22:01 +0000: Verify and Repair volume “disk1s2”
    Starting repair tool:  2011-12-27 18:22:01 +0000
    2011-12-27 18:22:01 +0000: Checking Journaled HFS Plus volume.
    2011-12-27 18:22:15 +0000: Invalid B-tree node size
    2011-12-27 18:22:15 +0000: Volume check failed.
    2011-12-27 18:22:15 +0000: Error: Filesystem verify or repair failed.2011-12-27 18:22:15 +0000:
    2011-12-27 18:22:15 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
    Filesystem verify or repair failed.
    2011-12-27 18:22:15 +0000:
    2011-12-27 18:31:57 +0000:           Name :           WD My Book 1110 Media
              Type :           Disk
              Partition Map Scheme :           GUID Partition Table
              Disk Identifier :           disk1
              Media Name :           WD My Book 1110 Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           574D415A4131363338333935
              Device Tree :           /PCI0/EHC1@1D,7/@2:0
              Writable :           Yes
              Ejectable :           Yes
              Mac OS 9 Drivers Installed :           No
              Location :           External
              Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
              S.M.A.R.T. Status :           Not Supported
              Disk Number :           1
              Partition Number :           0
    2011-12-27 18:31:57 +0000:

  • How do I transfer files from an external hard drive to my mac book pro

    How do I transfer files from an external hard drive to my mac book pro?

    What files are they? Is it a clone, a TM backup, or simply drag 'n drop?
    If it's the latter, simply drag them back. If something else, please post back with detailed info.

  • How do I transfer a specific backup from my external hard drive to my mac book air?

    How do I transfer a specific backup from my external hard drive to my mac book air? I downgraded my mac's software from Mavericks to Mountain Lion because of the computer's limations so I need to transfer all the info I had when Mavericks  and down to Mountain Lion. I already went to the Apple Genius Bar and they helped me downgrade, but I want to transfer information from a specific backup on my external hard drive?

    time machine backup?   Go into the backups.backupdb (time machine) and extract out the specific files, drag them to your desktop etc.
    consider in the future additional backup methods than time machine for easy file extraction.
    Methodology to protect your data. Backups vs. Archives. Long-term data protection

  • I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

    I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
    Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

  • I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.   Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5   I am new to Mac.

    I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
    Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5   I am new to Mac, so I hope somebody can give me some advice.
    Cheers

    if it's ntfs microsofts filesystem then you need a windows machine to recover them

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Hello, how would I go about using my time capsule as an external hard drive for my Mac book pro?

    Anybody know if I can use my time capsule as an external hard drive for Mac book pro?

    Just recognise the following.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • I have a macbook air late 2010 and keep getting a warning that my hard drive is full and to delete things so I purchased a external hard drive (1TB) but I'm just not sure what the correct way to transfer and store files to the external drive is. First MAC

    I purchased a macbook air about 5 months ago and lately i keep recieving a warning that the hard drive or disk is full and that I will need to move items to trash in order to free up space on it. I purchased a external hard drive 1 TB but I'm very new to mac and ios and unsure as to how I'm suppose to transfer my files (video, pics, music etc.) from my mac over to the external hard drive in the correct way so I won't end up deleting them permenately or screwing anything up with my mac as far as the applications and programs being able to run. Am I supposed to just copy to the external hard drive and then move to and empty the trash? That's pretty much all I could come up with, but then what if i need or want to access that file again at a later time. Also, I have an i Phone and i pad so with i cloud it automatically syncs all my purcheses and if i delete something from itunes on my mac it deletes from my ipad.
    I'd appreciate any kind of input i think im just a little lost here. I have to say i love my Mac and wouldn't trade it for anything (except maybe a macbook pro w/more memory)... Is there something I'm missing???

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

  • My macbook pro will not recognize my WD external hard drive 1tb

    My macbook pro will not recognize my WD 1 tb external hard drive that I have as my time machine backup. I worked just fine for a long time now The only way I can see it is through Disk utility. And when I try to repair the disk it say it cant be repaired, and i need to back up files and reformat. All my backups are on the hard drive. How do I back up the back if I cant get it recognized? Uggghhhhh I have several years of info on the hard drive .. PLEASE HELP!!!

    Hi cterry66,
    Welcome to the Apple Support Communities!
    I understand you would like to reset the user account password on your computer but do not know the original password. If you set up your Apple ID with that user account, you can use that Apple ID to reset your OS X user password. Please use the information provided in the attached article to complete the process. 
    OS X: Apple ID can be used to reset your user account password - Apple Support
    Cheers,
    Joe

  • I did an upgrade and lost all of my music. i had most of the songs (1400) on an external hard drive. how do i put these songs in my itunes library.? i was able to get them on my ipod some how but i cant play from just the itunes

    i recently did an up grade on my ipod touch  and lost all of my music (1700 songs). all of my music wason my ipod. i have an external hard drive with most of my songs (1400 songs) on it.  through playing around and just trying to fiquire it out, i managed to get the music from the external hard drive to my ipod touch. the problem that i just found out is that i cant play those songs from my computer unless my iopd is connected to the computer. when i try to play a song, it gives me thiserror message " THIS SONG CAN NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT. please help.what did i do wrong?

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    Delete the "songs" that do not play in your iTunes library and reimport them.

Maybe you are looking for