My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
It is an indication of serious Directory damage.
that leaves
a) third-party Utilities that will take those risks, or
b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

Similar Messages

ICloud Drive will not work on my iPad 3. Pages crashes when I try. Setting resets to off after it crashes. any suggestions?

iCloud Drive will not work on my iPad 3. Pages crashes when I try. Settings resets to off after it crashes. any suggestions?

From the Ipad manual - actually the same in Ipad, Ipod, Iphone --- the support site listed has frequently asked questions on Icloud drive.
Set up iCloud Drive
You can set up iCloud Drive using Setup Assistant when you install iOS 8, or you can set it up later in Settings. iCloud Drive is an upgrade to Documents & Data. When you upgrade to iCloud Drive, your documents are copied to iCloud Drive and become available on your devices using iCloud Drive. You won’t be able to access the documents stored in iCloud Drive on your other devices until they are also upgraded to iOS 8 or OS X Yosemite. For more information about upgrading to iCloud Drive, see support.apple.com/kb/HT6345.
Set up iCloud Drive. Go to Settings > iCloud > iCloud Drive, turn on iCloud Drive, then follow the onscreen instructions.

CD/ Blu-ray Drive Will Not Open/ Function Correctly

My CD/ Blu-ray drive will not open. I can force it open with a paper clip and put in a disk that way but it does not activate and read the disk. The drive also does not appear as a file selection under my hard disk drives section of my computer.
With this I am assuming my optical drive is broken so I tried looking for a replacement. I searched for the name of the optical drive in the HP PartSurfer and it says it is called SPS-DRV DVD SATA BD Combo 12.7. Just to be sure, is that the correct part I am looking for? If so, and say I were to go ahead and order this part, how do I go about removing the optical drive in my labtop and replacing it with the new drive?
This question was solved.
View Solution.

Hi,
Yes..that is the right part for your notebook.
HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001
You can follow the instructions from the links below:
Removing and Replacing the CD/DVD Drive
Or,
HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

My CD/DVD drive will not open

My CD/DVD drive will not open when I insert any type CD/DVD. The CD/DVD just runs but will not open.

Try cleaning the lens:
Use a DVD lens cleaning disk.
Use a few shots of compressed air in the slot.
Wrap a fine microfiber cloth (eyeglasses cleaning cloth?) around a business card and gently insert it in the slot.
If no success, a trip to the genius bar at an Apple store is the best option.
Ciao.

DVD drive will not open

I have just now set up my new HP Pavilion p7-1110 - the DVD drive will not open.

Hello Melly,
I would like to assist you with some information I have found about this issue and give you the in's and out's of your issue. The link below will give you different ways to get your dvd drive open:
http://www.computerhope.com/issues/ch000214.htm
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>Please click Kudos, if this information has been helpful >>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Optical disc drive will not open

Hi there,
All of a sudden my disc drive will not open. Neither will it open when rebooting and ejecting it before windows has finished start-up. I've checked power cables etc. etc. I do see the drive in Windows Explorer, and there are no mentions of driver issues or whatsoever. Can anyone help?
product: hp pavilion p7 1040nl
operating system: windows 7
error message when trying to open drive in explorer (front button doesn't work): An error occurred while ejecting 'DVD/CD-RW drive'

Open Device manager, expand DVD/CD-rom drives
right click on your dvd drive and select "uninstall", then reboot your PC, windows will reinstall the device, see if it opens now.
If it still will not eject, take a small paper clip that has been straigtened out and slide it in the eject hole on the drawer front, see if it will open this way, doing this will check to see if it is jammed. If it opens with the paper clip and the drawer works smoothly then there is something wrong with the drive itself and will need replaced

Optical drive will not open disc

Optical drive will not open CD or DVD since upgrading to Lion.

My Macbook Pro has just developed the exact same problem within the last month. Mine has been working fine since upgrading to Lion (upgraded when it was launched), but it has suddenly stopped playing any DVDs or CDs.
Does anyone have any suggestions before I book a genius bar appointment?

GarageBand 10.0.2 will not open on MacBook Pro 15-inch, Early 2011 running OSX 10.9.5. w/ 8 GB RAM and 1 TB SSD Samsung 840 EVO.

GarageBand 10.0.2 will not open on MacBook Pro 15-inch, Early 2011 running OSX 10.9.5. w/ 8 GB RAM and 1 TB SSD Samsung 840 EVO.
Have deleted (secure delete) and reinstalled several times. Got it to open once right after download... Usually crashes/hangs upon attempted start-up, then shows as "Application unresponsive". Must be forced to quit.
No other audio interfaces or drivers installed that I am aware of. Playback through onboard audio interfaces, sometimes routed to Apple TV via Cat 5 cable, out to receiver via fiber optic SPDIF, or to Panasonic HDTV via HDMI cable through Thunderbolt port.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login

Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login but works fine with admin login.
OS - WinXP Sp3
Things I tried.
1) Gave full rights on dreamweaver folder in program files.
2) Disabled welcome screen
3) Updated to Dreamweaver CS5 11.0.4
4) Reinstalled
5) Formated PC
But issue persists, please help.

Have you tried deleting or renaming the Dreamweaver configuration file?
See http://forums.adobe.com/thread/494811
This can solve many problems and create one in that any snippets that are installed are lost, but you can get them back. Instead of deleting the config file, just name it config.old. When your system is working, just copy the snippets from the .old file to the new one.

My iomega drive will not open on my new mac mini

my iomega drive will not open on my new mac mini. I was using it on my old mac mini with no problems. Help

What OS was the old Mini?

I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

Exactly where are you clicking, you need to be specific. For example, are you using the Dock, the Applications folder, Launchpad, etc. to attempt to start teh app? Also IOS 7.1.2 does not run on a Mac, what version of OS X is installed on your computer?

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

HT3204 My itunes store will not open. I get a blank page. When diagnostics ran it said secure link to itunes failed. What do I do?

Itunes store will not open. I get a blank page. When I ran diagnostics error message said secure link to itunes failed. I have internet access, have turned off my security, and I can go to explorer and get on itunes.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Firefox will not open it just shows a black ms dos page- how can i save my bookmarks?

firefox will not open it just shows a black ms dos page- how can i save my bookmarks?

See here for Bookmark Backup
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Profiles - Where Firefox stores your bookmarks, passwords and other user data
Profile Backup
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium

My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

Similar Messages

Maybe you are looking for