My final cut pro 6, is missing some files. because of mac keeper. I think its atom strand.HD. what to do, and how to make it work again?????

I got mac keeper to clean up some files, and now I cant open Final cut pro 6. because of missing files. it is loading, at Atom strand.HD file, before it says that the program suddenly shutted down. the atom strand.HD is a file, that is connected to motion. if I put motion in the garbage can, then final cut works, but if I take motion out of the garbage can again, then it doesn`t. arrrrr. shall I re install final cut or motion. or is there a better way to make it work, again????? !!!!

Well, best bet would be to reinstall FCP.  I'd use the FCS REMOVER from digitalrebellion.com (free) to uninstall the app first, then reinstall from the DVD.

Similar Messages

  • My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

  • How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?

    I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed. Thanks in advance!

    How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?
    If you can view a ProRes 4-2-2 video at all, then you either have the independent ProRes422 Playback component installed or the FCP "Pro" video components installed.
    I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed.
    Check your "~/Library/QuickTime" folder for your various "Pro" components. If in doubt that you have them all, re-run the FCP installer and it should add any missing components, apps, or utilities.

  • FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!?

    FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...

    You're in totally the wrong place...  this is the Mac Pro (no Book) forum for hardware.  You want
    Final Cut Pro X: Professional Applications: Apple Support Communities
    Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy.  If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
    Good luck

  • HT4926 I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

    I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

    Did you by any chance move the Events and/or Projects folders? Are they on an exteranl hard drive and it is now not plugged in?

  • Final Cut Pro 10.1 "MISSING PROXY"???

    Whenever I import my video to Final Cut Pro 10.1 it immediately shows a red image and says "MISSING PROXY". I can't figure out what to do. HELP!

    melaniiexp wrote:
    Whenever I import my video to Final Cut Pro 10.1 it immediately shows a red image and says "MISSING PROXY". I can't figure out what to do. HELP!
    This means that you have "proxy media" selected in the viewer, but you are not creating proxy media for the clips you are importing.
    Either create the proxy media (control-click on any  clips and Transcode Media...) or, probably better, change from proxy media to original/optimized media:

  • Final Cut Pro X: cancelled exporting process, file still on computer, but where?

    HI!
    I was exporting a project  from Final Cut Pro X, but I cancelled to process. I had chosen to save the file to external storage. My computer was processing the file to my computer and now after canceling  there is file with size over 30 gigabytes  on my computer but I don't have any idea where it is?
    I was exporting the project using compressor settings -not the best one choice, but the only thing I want now is to find the missing file and delete it.
    Share monitor gives me message: 3x Source file /var/folders/b4/y9pp857j2dx5mq4yp6nw3gqm0000gn/T/259EE137-52C2-47CD-AA69-DFAEB7 37E3B7.export-seq-id not found 
    Thanks a lot of your help!
           Christer 

    Hi,
    I didn't change the file name in the Save dialogue box and yes -I have certainly searched with spotlight and used all kind of methods to find the file.
    And there hasn't ever been any problems when canceling the process before this time.
    But I know much more after diagnostics in Apple repair service in Apple Authorized Service Provider (or what ever is the right term...). Like I wrote before, it's possible there are failures on hard drive and if the file has somehow got to the damaged place on hard drive, it's may be impossible to find the file without professional help. That's maybe not
    very common issue, but still possible. It will take week or more before I get their answer.
    I just hope I would have Final Cut on my iPhone....
                        Christer

  • HT5958 We are 4 min in to editing a video on final cut pro.  now my computer is freezing up.  I have heard that this is a glitch from downloading. (beyond frustrated)  is this from working from 2 external hard drives?  PLEASE HELP! =)

    PLEASE HELP. =) 
    we are about 4 minutes into editing a video for the first time on final cut pro x 10.1.  everything was going very smoothly, but then it started freezing up.  I had to do a hard reset and took it into the computer store that actually installed final cut for us.  they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!)  We work on an IMAC 2.66 ghz intel core 2 duo.  8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions)  Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

    Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
    Turn off wi-fi or disconnect the wire that goes to the Internet
    Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
    I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
    Basically, you probably need to free up resources.
    For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

  • Does Final Cut Pro X support all video files as did its prior version Final Cut Pro Studio?

    Hi,
    Use to have a Mac Pro and had Fina Cut Pro Studio. Now I have just got a new Macbook Pro (Lion), and have just purchased the new Final Cut Pro X from the App store. I am having problems importing 3gps files into FCP X. I never had a problem with the $1000 version of studio. Does the new FCP X have limitations on what video files are compatible with it? do I need to purchase additional plug-ins etc???
    Ta
    Zeb

    Really depends on the specific file type you want to work with. FCP X does not support every single flavor of video FCP 7 did, so it's not a huge surprise if the file you're using is not supported. That said, there's plenty of free third party tools you could use to convert it to a regular QuickTime ProRes file that FCP X would accept. For example- http://www.squared5.com/ would most likely be able to load it. Try and let us know. And if that doesn't work please provide more details about the 3gps file you're using.

  • Final Cut Pro X Error in relink file

    Final Cut Pro X. I have a problem: I can not relink the original files of a project that I've moved on an external hard drive. After finishing the work, I run a copy of the project following the procedures of Final Cut Pro X, but now that I reserve that project at the time to reconnect the file, it gives me this error "Incompatible file. The original file and new files have different audio source and channel counts. Relinked files must have the same media type and similar audio channels as the original files, and must be long enough to cover all the clips That reference the files ". The other times I had done this, it made me work quietly. Is the first time that happens to me. What has happened? How can I fix the problem?
    My version of Final Cut Pro X is 10.1.3, and my operating system is OS X Maveriks 10.9.5.
    Help me, thank you.

    Wow, that was quick. Which drive do I rename? The external or the one with Mac OS installed?

  • Final Cut Pro X not opening .fcp files

    I just purchased Final Cut Pro X. I am trying to open a .fcp file that was created in a previous version of Final Cut Pro, however it keeps giving the error "final cut pro cannot open files of this type".
    When I look at the details of the file, in shows as a "Unix Executable File", but the extension is still .fcp.
    Can anyone help?

    Thanks Tom. So...to open a previous version of a Final Cut Pro file there is no software that I can buy through Apple currently?

  • How do I get FInal Cut Pro to save the render files?

    Final cut used to work really great, but lately it has stopped saving any render files, so ever time I try to edit something new it starts re-rendering all of my other files and slows it down to the point of crashing a lot. Is ther any way to fix this or get it to NOT render things that I am currently not editing?

    Can you see the render files in your project folders? FCP X does not stop rendering by its own choice, check your preferences, as Tom suggested, and restart FCPX to see your settings taking effect.

  • Final Cut Express Isn't Importing SOME files

    Hey guys
    I've been using Final Cut Express to edit game footage I record on a Hauppauge HDPVR device. The device (and accompanying software) creates a .m2ts and then converts it to an mpeg4 file.
    Now, I record all my footage this way, and 95% of the time I can import to Final Cut Express no problems. However, a few files won't, and I get the "1 file recognised, 1 unknown" error. All of the file types are the same, so its not a case of an incompatible file type.
    Also, the file runs happily in Quicktime, but just won't import into FCE.
    Any help would be great thanks!

    The media needs to be converted into a format that is supported natively in FCE not into MPEG-4. I don't know what you're using to convert, probably Handbrake but that's not the way to do it. You could try ClipWrap but I don't know if it works with that camera.

  • Final Cut Pro X not opening some bundles with Yosemite

    FCPX starts up, some bundles will open but not load media, others will not open at all, just spinning beach ball, have to force quit! Anyone else seeing this? I'm running latest of everything. Thank goodness I did a SuperDuper backup last night so I can use my clone.

    FCPX starts up, some bundles will open but not load media, others will not open at all, just spinning beach ball, have to force quit! Anyone else seeing this? I'm running latest of everything. Thank goodness I did a SuperDuper backup last night so I can use my clone.

  • Final cut pro x crashes when loading files from my external hard drive.

    please help!

    Sorry, but I'm not following you very well. Perhaps some else who does will weigh in and help.
    evliz98 wrote:
    Movie files.
    The term, movie files, covers a lot of territory. What format? Open in Quick Time, hit Command–I and post a screenshot.
    My files are stored on an OWC external hard drive.
    Project and Events?
    If I drag a file to my computers hard drive, the applications starts up fine. SMH.
    Drag what kind of a file? Projects need to be opened from within FCP.
    Russ

Maybe you are looking for