My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

Have you downloaded them?
Incidentally, you seem to have a bad echo.

Similar Messages

I have final cut pro x. i edited a video that was shot with an 5d cannon. when i was done editing i exported the video. it shows in hd on quiktime. when i upload it to youtube it is much more blurry. am i doing somthing wrong???

i have final cut pro x. i edited a video that was shot with an 5d cannon. when i was done editing i exported the video. it shows in hd on quiktime. when i upload it to youtube it is much more blurry. am i doing somthing wrong???

kushyton wrote:
it shows in hd on quiktime. when i upload it to youtube it is much more blurry. am i doing somthing wrong???
In QT, if you open the Inspector, what is the format? Post a screen shot of the info.
Did you try one of the Video Share presets?
If you've got high quality material to work with, uploading to YT or another video service should produce good results. They will re-encode whatever you give them. So as s long as you give them a sufficiently high quality file to start – and assuming it's h.264 – you should be good.
Russ

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

How to down load dvds into final cut to edit a show reel

I want to edit sections videos of my theatre work, that I only have in DVD format, into a show reel. I have Final Cut Express, a lacie external hard drive, a G4 power book, a digital video camera, Backup... I have successfully copied the video files, but Final Cut does not recognise them. Backup fails every time. Perhaps I need extra software to get the job done. Help.

You can search this forum for more info on this .. you should get lots of posts
But, briefly, you need to convert these MPEG2 (DVD) files to something FCE understands (DV)
To do this you can use programs like dvXdvd or MPEG Streamclip (to use this one you need the Apple MEPG2 playback component)
Or: You can hook a DVD player to your DV cam via S-VHS/RCA connecters and hook the cam via firewire to your puter and capture that into FCE
No matter how you do this, be aware that there will be some quality loss

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

Absolutely. Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion). Make sure you check the Self-Contained box. The export will be an exact copy of your Sequence, complete with any filters or other effects you've added. Import the self-contained movie back into the project (or another project) if needed.
-DH

I need help. How to export split track for Final Cut Pro 7 Thanks

I need help. I have edited a film and now the company I have made the film for want a split track of it. I have no idea how to export a split track off Final Cut Pro 7 and I need simple language to explain it to me as I am a beginner. Thanks

I assume you have multiple tracks of audio? And the audio is distributed discretely over these tracks (sync sound on tracks 1 and 2, sound effects on tracks 3 and 4, music on tracks 5 and 6 for example)?
Then duplicate your sequence by clicking on the icon for your sequence in the FCP browser and control-clicking on it. From the drop-down menu choose Duplicate. Double click on the duplicate sequence you just created to load it to the timeline and canvas.
Now, working on the copy you just made of your finished sequence, click anywhere on the timeline, and type Command + 0 {zero} to bring up your sequence settings. Click on the Audio Outputs Tab.
Once the Audio Output Tab opens, set the Outputs to the desired number of discrete tracks you want to export - in this case I will set it to 8, as I have sync sound on tracks 1 & 2, Voice Over on tracks 3 & 4, Sound Effects on tracks 5 & 6 and Music on tracks 7 & 8.
Once I do that the 8 tracks appear. I set them all to Dual Mono as I want them to be discrete tracks:
Once I am done, I click OK and return to the far left side of the timeline where the audio selectors are, and carefully control - clicking in the empty space above the lock symbol,
From the drop down menu I assign the output of each track - track 1 to to output track 1, track 2 to output track 2, doing so to each track:
You need to set the output for each track. Once all my track assignments are done, I go to the menu File > Export . . . > QuickTime Movie and export my sequence, but now it is exporting with 8 discrete tracks of audio.
To do a quick check that everything is OK, re-import the movie you just exported back into FCP, and open it in the Viewer and you will see that it does indeed have the multi-tracks, as 8 mono track tabs appear at the top of the viewer.
Now give that QuickTime a name that includes "Split Tracks" in the title and copy it to your delivery drive.
MtD
Message was edited by: Meg The Dog to fix typo

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

How do I view fps? and how do I adjust fps in final cut pro x?

How do I view fps? and how do I adjust fps in final cut pro x?

The frame rate shows in the Inspector. Conform in the retiming menu of the toolbar will let you change the frame rate.

How to use garageband loops in final cut pro x

I have O/S 10.6.8
I have looked in the following for garageband loops, but see nothing.
1. Mac HD > Library > Audio > Apple Loops > Apple > Apple Loops for Garage Band,
2. Mac HD > Library > Application Support > GarageBand > Apple Loops > Apple Loops for GarageBand,
and
3. Username > Library > Audio > Apple Loops > User Loops. (cannot see any files here)
I am wanting to access these Apple loops to use in Final Cut Pro X.
Do I need to 'unhide' these files

I appreciate your help. As you can guess, I am new to the Apple discussion groups.
I tried unhiding files with Terminal, but that did not appear to help in this situation
I did find an answer that suits me for the mean time.
First - (to see loops)
to see the Apple loops on my computer with Finder-
-1 open Finder
-2 Click on 'Go' icon at top of page
-3 This brings drop down box
-4 Click 'Go to Folder' and enter the following
       /Library/Audio/Apple Loops/Apple/Apple Loops for Garageband
Second - to get them into Final Cuty Pro X
Create new folder in     /Library/Audio/Apple Loops/Apple
called                         Apple Loops for Soundtrack Pro
Now copy all files from    'Apple Loops for Garageband'
                           to       'Apple Loops for Soundtrack Pro'
By creating the folder 'Apple Loops for Soundtrack Pro', it livens its existing link within Final Cut Pro X,
so when you are in Final cut and go to the 'Music and Sound' icon you can now see the folder has changed from gray to blue, and you can see any files you copied into it.
Cheers to all the help from others in trying to understand Finder.

Nikon D90 footage: Can you edit natively in Final Cut?

Just wondering if anyone has been using the new Nikon D90 to shoot video, and then importing the footage natively into FCP6. The camera's video-recording format, from what I have read, is 720p24, an .avi file, and a Motion JPEG codec.
I see that in the settings for a Final Cut sequence, you can choose 1280X720 frame size, a true 24 frames per second rate, and either a Motion JPEG A or Motion JPEG B compressor. It seems like with these settings, you could put your footage into the timeline and not have to render it before editing . . . unless the .avi file format goofs it up. Can you edit .avi in Final Cut natively, or do you have to use a Quicktime file?
Any workflow advice much appreciated,
Jim

No, sorry to say, I do not own the camera. And in looking around the web for an original, as-shot-by-the-D90 clip to experiment with, the only ones I found were at this site:
http://www.dpreview.com/news/0809/08090101nikond90samplegallery.asp
They were billed as: D90 sample movie 1 • original .AVI format • 21 seconds, 35.7 MB
and: D90 sample movie 3 • original .AVI format • 9 seconds, 24.5 MB
So I downloaded them, imported them into Final Cut, and they showed up with settings in the browser of: 1280X720 and 24 fps (so far so good) but then a compressor setting of "Apple OpenDML JPEG" rather than what I was expecting, Motion JPEG, which is what the D90 spec is. If the clip was truly "original .AVI format," I would have expected the compressor setting to be Motion JPEG.
Then, when I tried to change the sequence settings to Apple OpenDML JPEG, I found that there is no such setting. My thought was if the size, 1280X720, the frame rate, 24, and the compressor settings all matched, you could edit natively. And when I dragged the clip into the timeline, it did not give me a dialogue box asking if I would like the sequence settings to match the clip, the way it does with some footage.
Yes, you can render the clip and then edit it, but it would be great to avoid that step. Anyway, I got the red bar in the timeline with every combination of sequence compressor settings I tried, maybe 10 of them.
So maybe the answer is some time is needed for Final Cut to support the D90's Motion JPEG files natively, though I believe that is an older codec. Too bad the D90 does not record in something like DVCPRO HD. For a $1000 camera, the image quality looks pretty good, and the shallow depth of field really turned my head. I was thinking it might be a cheap Red Rock or Letus killer.
Thanks for the input,
Jim

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

How do I avoid rendering in Final Cut Express 4 ?

Someone mentioned synchronizing movie files and sequences but I am not sure what type of files either should be and how to do that. As of now I am using h.264 compressor for movie clips but I don't know if that is good.

Please repost in Final Cut Express forum; this is Final Cut Pro X forum.

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

Similar Messages

Maybe you are looking for