My firefox 5.0 does not respond to the mouse (back/forward) buttons. Is there a fix for this? I already updated my drivers.

It is pretty much what I have stated. It works fine in other applications like IE, explorer but not for Firefox.
I am running Windows 7 64bit with setpoint control centre version 6.30.41 and driver version 5.30.67.
My mouse is the performance mx.

This seemed to be a recurrent solution 2004-2006, and looks the same as what you found for yourself.
:In the Set Point software, set the forward and back buttons to "other," Then select "generic button" from the drop down list for both of them.
*http://img123.exs.cx/img123/5535/SetPoint_For_Firefox.jpg
references: logitech mouse firefox back forward
* Firefox Quickfind - Logitech Forums<br>http://forums.logitech.com/t5/Mice-and-Trackballs/Firefox-Quickfind/m-p/386805

Similar Messages

HT1476 iphone 5 usb does not charge in my 2013 Honda Accord. Is there a fix for this issue?

iphone 5 usb does not charge in my 2013 Honda Accord. Is there a fix for this issue? It will connect via bluetooth but when I go to connect the usb charger it states that it is not compatible or you never get the charging display on your iPhone 5. It charges just fine when I use the AC charger in the house. At first I thought it may have been the cord but the same cord works fine in the house too. This causes problems when you take long trips and don't have any way to charge your phone while on the road. Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?

Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?
Are there any upcoming fixes/updates to the software of your Honda Accord that will fix this? Everything works fine except when the car is put into the equation?

I have Adobe Acrobat X, the newest full version. After installing Firefox 4.0 I cannot anymore print using the Adobe pdf converter. Is there a fix for this?

When using print command from either Firefox or within an internet page open, Firefox/Acrobat are not able to print anything. All such print jobs need to be cancelled manually and Firefox locks and in a few cases I have to restart the computer. I am running Windows 7.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

HT201412 My home button does not respond on my iPad 3. Any ideas on how to solve this problem?

I just received a new iPad 3. The home button does not respond. Any ideas?

return it to have it checked for malfunction. Might be a transport defect . ( Although I never heard of such a severe case on brandnew Apple Hardware )

Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7.

Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7. When will you respond??

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
Now when Firefox hangs, is this randomly, on specific websites, etc.? You can also read [https://support.mozilla.org/en-US/kb/Firefox-hangs https://support.mozilla.org/en-US/kb/Firefox-hangs]

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

Ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

To get iTunes to see your iPod try:
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing it in recovery DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Sometimes this program will get th iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

I recently downloaded the updated itunes and not everything shows up. My operating systems is Windows 7 and graphics is AMD Radeon 6530D. Is there a fix for this?

I recently downloaded Itunes and it does not display correctly. I have an AMD Radeon 6530D graphics card with Windows 7. Is there a fix for this?

Hi McNinch9573,
Welcome to the Support Communities! Are you asking about the iTunes Movie Trailers? Are you able to play any of the trailers on this site?
iTunes Movie Trailers
Installing QuickTime Player 7 - Apple Support
http://support.apple.com/en-is/HT201288
If you work with older media types or have a legacy media workflow, then you can install the QuickTime Player 7 application on Mac OS X Snow Leopard and later.
Compatibility
OS X includes QuickTime Player (version 10.x) which handles most media playback needs. Only Install QuickTime Player 7 if you work with older media types, have legacy workflows that are not supported by the newer QuickTime Player application, or need to use your QuickTime 7 Pro registration key.
QuickTime Player 7 version 7.6.6 works with the following OS X releases:
Snow Leopard
Lion
Mountain Lion
Mavericks
Installing QuickTime Player 7
Choose your OS X version from the list below for information on how to install QuickTime Player 7.
Lion, Mountain Lion or Mavericks
Download QuickTime Player 7 from here.
Double-click "QuickTimePlayer7.6.6_SnowLeopard".
Note: This download is compatible with Mac OS X v10.6 or later.
QuickTime Player 7 will be installed in your Utilities folder.
I hope this information helps ....
- Judy

I cannot play music from my itunes library. I keep getting an itunes message that says, "The song could not be used because the original file could not be found." Is there a fix for this? Thank you.

I cannot play music from my itunes library. I keep getting an itunes message that says, “The song could not be used because the original file could not be found.” Is there a fix for this? Has this happened to anyone else? Is there a fix for this? Thank you.

Hello Turintest2,
I am having a similar problem. I have over 4000 songs giving me this error. I certainily don't want to go in one by one and find them. I know you wrote a script for Windows but I am a Mac user. Is there a fix for me? Here is the info on where the song is currently (used by doing the get info)
Here's a shot of my preferences:
Just FYI, I know that apparently iTunes is looking for this music in the trash. However, if I go here:
Then I find the music there as well. (Which is where it is in my preferences.)
Please help! I don't want to have to go through over 4000 songs and update them one by one.

My firefox 5.0 does not respond to the mouse (back/forward) buttons. Is there a fix for this? I already updated my drivers.

Similar Messages

Maybe you are looking for