My firefox loads in another language than English

I am in the USA, but firefox and some other pages also load in Spanish, i want them in English.

If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
* Firefox 17.0.x: http://www.mozilla.com/en-US/firefox/all.html
Some sites automatically redirect you to a site in the local language, based on where your IP locates you.<br />
You can check the installed Languages: Tools > Options > Content > Languages<br />
There is usually a link on such websites choose a language or go to an international version that allows to choose the language.<br />

Similar Messages

After downloading iOS 7 I can't use my AppStore as another language than english appears...

After downloading iOS 7 I can't use my AppStore as another language than english appears... I am getting frustred!

I don't know if this helps, but I experienced a similar issue with my iPad 2 after updating to iOS 7.
My "solution" to the problem, after pulling out my hair for hours, is to plug it in the wall charger, and then shut the iPad down completely. It does charge when turned off, although a bit slower than usual, or so it seems. Pheeew...:-) I realize that this is a pain if you have a problem with an iPhone, because you have to turn it off to charge it. Presuming that this works, of course. Otherwise, I don't know..
After the update, the iPad simply does not respond when i plug in the charger, nor does it connect to the USB port. The battery just keeps wearing down. I think it could be connected to the firmware change that iOS 7 brings, which I guess in itself has to do with Apple wanting to block out 3rd party manufacturers of power adapters of the new "lightning" type.
The only thing I can think of that might have gone wrong on my part concerning the update is that I didn't have it plugged in while installing the update - although I believe this is recommended from Apple. I'm thinking that in my case the new firmware update simply hasn't registered any adapter present upon installation, and that might have caused the iPad to not recognize an adapter at all, regardless of type. I have always used original Apple adapters, btw, so I'm not really guilty of anything other than not plugging it in while updating - or, at least that's my own theory. Which is better than no theory at all.. ;-)
Obviously, I'm waiting eagerly for Apple to solve this issue. Not really happy at all with this..

Iphone - languages.. is it possible to get another language than English?

Iphone - languages.. is it possible to get another language than English?

It depends on what you're trying to do.
See this website for more info:
http://m10lmac.blogspot.com/2007/06/iphone-language-capabilities-seem.html
typing - no
Safari - depends on the language
Mail - perhaps? I've been told it should work depending on the application sending - it didn't work with Lotus Notes.
Aym

Retention tags not working if mailbox has another language than english

Hi folks
I've created a retention tag (type: Inbox ) in exchange 2013 which deletes all mails older than 14 days. works perfectly for mailboxes with english standart folders, but if i apply the policy to an mailbox with german or french language, the emails
are not getting deleted. i think the problem is that the inbox folder is called "Posteingang" in the german mailboxes.
is there a workaround to use my retention tag for other languages as well?
Thanks!

Hm, that sounded interesting enough for a test, but since I'm an O365 guy, I run the test against EO. Works OK even after I rename the folders, the only thing I did was to simply run the Start-ManagedFolderAssistant cmdlet to speed up the process.
EO is usually few versions ahead of on-prem, so either this has been fixed (and the fix is coming with CU7 or later), or we are simply missing something in your scenario. Have you verified that the policy is actually recognized as 14 days by the client,
for the non-English mailboxes? Double-check the tag and policy, and run the Start-ManagedFolderAssistant just in case.

Errors in another language than English

Hello guyes,
I have problem with error messages which are not in English, but in Czech. I installed Oracle with English only. The nls_lang is american_america.utf8.
What settings influence in which language will be output?
By the way Oracle is EE 11.2.0.4 and it's running on Red hat.
Thank you for you time.

Have you checked the value of NLS_LANGUAGE?
See: NLS_LANGUAGE

Pages won't auto-correct in another language than english ?

Alright, i have pages and i just wrote a text and want it to correct it in french. I changed everything that was international to french. All the menus Everything is in french even when i right click on the word i wan to correct, i get the menu in french, its only when I want to correct the word, it only gives me a possible correction in english.
Does anyone know why ?

Is Inspector > Text > More > Language is also on French?

JSAPI - other languages than English; MIDlet - settings loading; JSAPI - al

Hello!
I need to create application which uses speech recognition. At first I thought about using CMU Sphinx (PocketSphinx or, possibly, Sphinx4). Later I thought about JSAPI. (Sphinx somehow uses JSAPI but I don't know what is the difference between JSAPI and Sphinx).
I have read almost all (up to 6.7.9) of the following tutorial: http://java.sun.com/products/java-media/speech/forDevelopers/jsapi-guide.pdf. Unfortunately I couldn't've found one important thing, i.e. how to create acoustic model for other language than English?
Thanks in advance for your answers :-)!
PS There are some other things which I'd like to know:
1) How to load some settings from file (I guess nowadays configuration files are created with the use of XML but I dunno)?
2) How to maintain algorithm which is used by MIDlet which involves JSAPI? I mean there are some different things which my MIDlet needs to do. I guess it is good habit to divide different goals into separate parts of code (due to object-oriented programming).
     In my case there are some different things:
     a) speech recognition of audio input, i.e. changing input audio stream into output text string
     b) analysis of that text string and according to this string choosing the proper transition in my algorithm
     In general I have written my algorithm on sheet of paper and it takes about ten A4 sheets of paper. Because of it I thought there should be some way to write this algoritm maybe outside the code, in some kind of file which would contain this algorithm. Maybe there is other good way to implement this algorithm, not necesarilly in the code.
     c) sending of results through httpconnection with the use of POST method
     d) receiving in on TomCat on server
3) Which method should I use to receive the recognized speech? I found these:
     a) FinalRuleResult, b) Result -> getBestToken, c) getSpokenText, d) ResultToken of RuleGrammar
4) Can you give me any full examples of JSAPI usage? (Not just short parts of code like in this JSAPI guide)?
Greetins :-)!

Praveen, Yes the infoobject is language dependent. The problem did not happen in BWQ but came up in BWP. so I am not sure at this time what is causing in production that didn't happen in BWQ.
Thanks,
Syed.

I want to buy a MBP with retina display, can I get the keyboard in another language than the ones listed?

I would like to buy my new mac in the states, but want the keyboard to be in another language than the ones listed (english, french, spanish and japanese). Is this possible if I contact them?
Btw, I know that you can change the language in settings, but I want the physical other keyboard, not to just change it on the mac!

EmilyVictoria wrote:
hopefully they can do the same at the apple store Thank you!
I think they can from a physical retail store, but you should ask them directly. Normally the kinds of keyboards available via special order should be those shown at the site below, but I have heard that some probably are only available outside the US.
http://support.apple.com/kb/HT2841

B2Bconsole in any other languages than English?

Does anyone know if there is a civilised way to localize the B2Bconsole GUI, to display in any other language than English?
I have found no documentation nor settings, and not sure if there is any way to do it (except for decompiling the orignal one, or writing you own console...).
thanks,
Norbert

Dheeraj,
Sincerelly, I don't think you will have prepared translation to Polish , but maybe? If not, is there any possibility to create such a translation oneself?

IE7 settings in other languages than english

Hi all,
I have a question concerning the IE7 settings for CRM (PCUI, WebUI):
From the SAP support we received the recommended settings in english. We have several users in different countries and their Internet Explorers are in in french or hungaria or whatever.
Now the questions is: are there documents with the IE7 settings in other languages than english? Or do the users have to compare the english settings with their version of the IE?
What is your experience with this?
Thanks for your help!
Greetings
Anne

By typing in a language other than English. You can change the keyboard to more suitable forms for many languages.
"Add international keyboards:
1 Choose General > Keyboard > International Keyboards.
The number of active keyboards appears before the right arrow.
2 Tap “Add New Keyboard…,” then choose a keyboard.
You can add as many keyboards as you want. To learn about using international keyboards, see Appendix A, “International Keyboards,” on page 248.
Edit your keyboard list: Choose General > Keyboard > International Keyboards,"
From page 199 of the User Guide: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Web report print PDF in other language than English

Hi,
when i try to print the queries thro' web analyser(web output seen on Enterprise portal), the pdf document is generated in some other language than English.
What is the problem?
thank you....

Hi BI.
I would check the default language in the portal for the specific user. You will find this in the EP user administration in the general information tab.
Hope it helps.
BR
Stefan

How do I message in other languages than English

How do I text in other languages than English?

By typing in a language other than English. You can change the keyboard to more suitable forms for many languages.
"Add international keyboards:
1 Choose General > Keyboard > International Keyboards.
The number of active keyboards appears before the right arrow.
2 Tap “Add New Keyboard…,” then choose a keyboard.
You can add as many keyboards as you want. To learn about using international keyboards, see Appendix A, “International Keyboards,” on page 248.
Edit your keyboard list: Choose General > Keyboard > International Keyboards,"
From page 199 of the User Guide: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Voices in other language than english

Hi,
Is it possible to add a voice over in an other language then English?
Thanks
Arnold

Hi BI.
I would check the default language in the portal for the specific user. You will find this in the EP user administration in the general information tab.
Hope it helps.
BR
Stefan

Use an application in another language than your system language

This topic is already spoken about some times here in the forum.
Since SL the language triangle is missing when you CMD+I on a application.
I am using the system in German, but I love to use FCP for example in English.
I really wonder why Apple got rid of that cool feature?!?!?
I found this:
How-To Change a language for an application in Snow Leopard
"defaults write com.apple.iChat AppleLanguages "(German)"
and you can reset it by
defaults delete com.apple.iChat AppleLanguages"
but its not working always...
Looking into the package of FCP and
swap the folder names under RESOURCES of the English.lproj and the German.lproj is resulting also in some strange mixtures English and German language messages.
I guess in Leopard the language selection in the information CMD+I dialog was only creating a pointer and tell the system to use the right folder in the package.
There should be a failsave and easy way to set the language for an application.
Funny, there is also a "Resources Disabled" folder which has the old language files that were used by Leopard. I am afraid I can only get rid of all that extra files if I install SL fresh again...
I hope someone...means Apple sends out a fix for that problem...for me they can even advertise it as a new feature
But give it back! I was more than useful!
Has anyone found a good solution yet?
Thanks

yes, I know!
But this is not permanent and a very bulky way to use differnt apps.
In a daily workflow I can't start a software that let's me choose a language I want to run a software....no...takes too long! And I have to think...too much work

Problem with texting in a different language than English

So I added Greek as a language on my phone through desktop manager. When I type a text in Greek, with Greek letters, it looks fine but then I send it and it switches over to English letters. How do I get the text to remain in Greek, so that I see it in Greek after it sends and those who read it are reading it in Greek as well? Sorry if this is a rather basic question, I'm not too tech savvy.

what is your email provider?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

My firefox loads in another language than English

Similar Messages

Maybe you are looking for