My Flash doesn't work on IE 8

I am a webmaster with an existing flash on
http://www.patriciawells.com
No changes to the flash in about a year. Works great on IE 7,
Firefox, Netscape, Opera, etc....
Downloaded IE 8 Beta 2 this morning and the flash doesn't
work.... Displays an x in the box (like a missing pix on an html
page).
Called Microsoft and they basically told me take a long walk
off a short pier.... So much for them caring about how their beta
works....
Any suggestions would be appreciated.
Thanks
JohnJ

RaleighPilot wrote:
> I am a webmaster with an existing flash on
http://www.patriciawells.com
No
> changes to the flash in about a year. Works great on IE
7, Firefox, Netscape,
> Opera, etc....
>
> Downloaded IE 8 Beta 2 this morning and the flash
doesn't work.... Displays
> an x in the box (like a missing pix on an html page).
>
> Called Microsoft and they basically told me take a long
walk off a short
> pier.... So much for them caring about how their beta
works....
Well, all your object embed tags are correct so it's
obviously the Beta problem.
Nothing can do about it.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

  • IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

    Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • Flash doesn't work suddenly [SOLVED]

    Today flash doesn't work anymore, I do not remember any modifications. In Firefox the browser segfaults after a few seconds of flash content. In Opera the flash area is replaced with weird graphics http://img294.imageshack.us/img294/5845 … 0x800s.png like this. I reinstalled flash10, no help. I installed flash9, no help, same problems.
    Also, gnash plugin works for most flash content, but not for youtube though (on youtube I'll just get a blueish empty screen). Viewing flash videos is a must for my PC use..
    EDIT:
    I discovered that my sound didn't work, and I remember removing dbus from my modules since somebody says HAL starts it.
    I solved it by adding dbus after hal in modules. I know that people say you shouldn't do that, and it creates this error text at bootup, but that did fix my sound, and my flash issues. Weird.
    Last edited by nawitus (2009-05-19 10:03:38)

    that didnt do the trick either.
    I decided to reinstall flashplugin, and then i noticed a warning that said "warning: directory permissions differ on usr/lib/mozilla. filesystem: 700 package: 755."
    should i just try to chmod /usr/lib/mozilla, and then reinstall Flash?
    EDIT: Yep, i just ran sudo chmod 755 /usr/lib/mozilla, and reinstalled flash. Works well
    Last edited by DisturbedFood (2011-03-17 20:52:35)

  • I have latest version of flash but flash doesn't work in safari!

    Why do I have latest version of flash but flash doesn't work in safari!I have flash for mac.Your help will be appreciated.

    If you're talking about using Flash on your iPod, you can't. There is no version of Flash that will work on any iOS device. If you're talking about using Flash on your computer, you may want to repost in the correct forum.

  • Flash doesn't work and work with another browser!!

    ''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
    Flash doesn't work and work with another browser!!.
    The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!

    Whay do you mean "difficult with the camer?"
    Two things that might help. Reset all your settings and reset the phone.  Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings  Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

  • IPhone 5 torch and flash doesn't work

    iPhone 5 torch and flash doesn't work? How can I activate?

    The flash is activated as follows:
    When you are in camera mode, and the camera is open about to take a photo, you will see an elliptical button in the upper left with a flash-like sign.  Press that button and you will find it has three settings: Auto, On, and Off.
    Choose one.
    I don't know what you mean by "torch".

  • Flash doesn't work in Firefox 13

    Installed Firefox 13 yesterday. Now flash doesn't work. Have done all the supposed fixes to no avail. Have uninstalled and reinstalled flash. I'm at my wits end with this issue. I'm a web designer who uses flash in a number of my sites. VERY IRRITATING when my sites don't display properly. Anyone have a solution other than the pat Mozilla "fixes"?

    I received a PM from '''CheckMate''' about this thread. Since this is something that I think should be discussed openly I'll reply here.
    The ActiveX plugin (npmozax.dll) issue is now fixed via the Mozilla blocklist, which automatically disables it. For some background on the ActiveX plugin issue, see [https://support.mozilla.org/en-US/forums/contributors/708425 Blocking the old ActiveX plugin] in the contributor's forum thread.
    The Flash 11.3 Firefox protected mode problem is a separate issue and one related bug is [https://bugzilla.mozilla.org/show_bug.cgi?id=747683 747683] So, if you did have the ActiveX plugin installed and it is now disabled, AND you have Flash 11.3 installed, then the issue is no longer the ActiveX plugin.
    If the problem is Flash 11.3 protected mode (or other issues with Flash 11.3) it's not a good idea to suggest downgrading to 11.2.202.235. The reason why uninstalling Flash and going to a page that requires Flash installs an older version is because the Plugin Finder Service hasn't been updated yet! This is from http://kb.mozillazine.org/Flash#Installing_Flash_on_Windows <br>
    '''Quote:'''<br>
    ''If the Flash plugin is not installed and you visit a page that has Flash content that requires the plugin, the Plug-in Finder Service can download and install Flash for you (see [https://support.mozilla.org/kb/Installing+the+Flash+plugin Installing the Flash plugin (Firefox Support)] for more information). If you want to try this method and Flash is already installed, you can [http://kb.mozillazine.org/Flash#Uninstalling_Flash uninstall Flash] and then visit [http://www.adobe.com/software/flash/about/ Adobe's Flash test page] to launch the Plugin Finder Service ; however, it may offer you an outdated version.''
    The alternative (disabling Flash 11.3 protected mode by editing an obscure file) is not good either. I don't know what to suggest in those cases. I think it would be a good idea if you could bring this up in the SUMO Community Discussions forum. There's already a topic started on Flash 11.3 issues, here:
    *https://support.mozilla.org/en-US/forums/contributors/708430 Flash 11.3 issues (was: flash 11.3 released)
    Here is your original message, for reference:
    ''Hi, Alice- You locked the thread on the Adobe Flash Plugin update 11.300.257 not working question but you really shouldn't have for the following reasons. First, although I too found today that the Active X has been blocked as of June 7, the problem persists and the instruction is to contact the manufacturer. How about contacting Adobe and straightening this out on the Developer level instead of closing the thread because there's another temporary but much simpler solution that I found. Second, the instructions on how to disable Protected Mode are nuts. I'm pretty advanced, but my common sensed tells me this is too complicated to bother with and shouldn't be necessary and you yourself say this isn't a permanent fix. Third, I found a much simpler solution, at least until this bug is fixed. Completely uninstall the Plugin from the Add and Remove Programs list. Then, when you try to access any video on YouTube which uses the Plugin, Firefox reports that it needs an additional Plugin to play the video (look specifically for the FF blue plugin icon). When you click on it, it automatically downloads the PREVIOUS VERSION, 11.2.202.235 which works perfectly. But if you click on the warning below it that Adobe Flash is needed, the buggy 11.3.300.257 version will be installed again! This has to be fixed by the Developers. Until it is, the fix is simply to roll back the faulty update, which could have also been done with a restore point but I wanted to find the cause. FF apparently knows automatically that this plugin is faulty and installs the previous version, but the other instruction is contradictory and installs the 11.3.300.257 Nice!?!? ''

  • Flash doesn't work?

    It seems flash player doesn't work in the browser.. I guess it works some of the time as I was able to load and run a tiny .swf demo/game.
    But when I go to YouTube for example it doesn't load the video in the web page. (As an example; I know stand-alone Youtube clients are available)
    Phone is an E51 by the way.

    This is because the E51 only has flashlite 2.0 and the youtube site (and many others) needs flashlite 3.0 to work.
    The only way to get flashlite 3.0 on your phone is if nokia adds support for it in a future firmware update. When and if this will happen is anybodys guess. So far the only phone to see this feature in an update is the N95 8GB.

  • Flash doesn't work and I cannot download it so my video doesn't work and it sucks thanks a lot

    Have had 3 days of hell trying to download this crappy flash player and because of it my videos don't play, my amazon cloud player doesn't work. I hate Adobe right now. Either help me fix this or go to F'ing hell

    Hi cosmicbuffalo,
    I've replied to your post here - http://forums.adobe.com/message/5406528#5406528
    Please reply there and provide me with more information about your issue so I can help.
    Thanks!

  • Exports from Keynote to Flash doesn't work

    I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

    Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

  • Controlling spry accordion from flash doesn't work in IE 8

    Hi all,
    I created a spry accordion in an html page and a little spry controller in flash, on the same page.
    The flash controller contains buttons that should trigger the accordion in the same page.
    here is the code I inserted in a flash button:
    on (release) {
    getURL ("javascript:acc_ricette.openPanel('mypanel_ID'); return false;")
    where mypanel_ID is the ID of the accordion on the page.
    When I click any flash button this works perfectly in firefox and chrome, but it doesn't work in IE 8 and Opera.
    The accordion itself (not using the flash buttons) works in all browser.
    Is there a solution
    TIA
    tony

    Hi all,
    I created a spry accordion in an html page and a little spry controller in flash, on the same page.
    The flash controller contains buttons that should trigger the accordion in the same page.
    here is the code I inserted in a flash button:
    on (release) {
    getURL ("javascript:acc_ricette.openPanel('mypanel_ID'); return false;")
    where mypanel_ID is the ID of the accordion on the page.
    When I click any flash button this works perfectly in firefox and chrome, but it doesn't work in IE 8 and Opera.
    The accordion itself (not using the flash buttons) works in all browser.
    Is there a solution
    TIA
    tony

  • Flash doesn't work in IE after virus

    After my wife got a virus Flash no longer works.  Initially IE would not run at all but I was able to google some information that allowed me to tweak the registry and I was able to get IE to run.  However, I have been unable to get Flash to work.
    I have installed/uninstalled numberous times with various uninstall programs.  I have checked to insure that the kill bit has not been set.
    When I install Flash from IE I get a message in red indicating that Flash has already been installed.
    My wife's computer is running Windows 7 64 bit and Internet Explorer 8.
    I was able to install Firefox and get Flash to install and run in it.
    Any ideas of what else I could try to get Flash to work in IE?
    Any help would be greatly appreciated.

    In Maromed/Flash:
    Flash10p.ocx
    FlashInstall.log
    flashplyer.xpt
    FlashUtil10p_ActveX.dll
    FlashUtil10p_ActivX.exe
    lashUtil10p_Plugin.exe
    install.log
    NPSWF32.dll
    Flash is not showing up in the list of plugins.  I checked the registry and it doesn't appear that the registry entries for Flash are appearing there either.
    If I go to flash.com it takes me to a page that will either show me a flash presentation or tell me I need to download and install it.  I get the message indicating that I need to intall it.
    Thanks again for the help.
    p.s.  Here is the install log:
    =O====== M/10.2.159.1 2011-05-01+20-57-25.921 ========
    0000 [I] 00000010 "C:\Users\pennie\Downloads\Flash\install_flash_player_10_active_x.exe"
    0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
    0003 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
    0004 [I] 00000013 C:\Windows\SysWOW64\Macromed\Flash\Flash10p.ocx
    0005 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10p_ActiveX.exe
    0006 [I] 00000016 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10p_ActiveX.dll
    =X====== M/10.2.159.1 2011-05-01+20-57-33.440 ========
    =O====== M/10.2.159.1 2011-05-01+20-57-40.136 ========
    0000 [I] 00000010 "C:\Users\pennie\Downloads\Flash\install_flash_player_10.exe"
    0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
    0003 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
    0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
    0005 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
    0006 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
    0007 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
    0008 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0009 [W] 00001036 Software\Opera Software/Last CommandLine 2
    0010 [W] 00001036 Software\Opera Software/Plugin Path 2
    0011 [W] 00001036 Software\Opera Software/Plugin Path 2
    0012 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll
    0013 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10p_Plugin.exe
    0014 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
    =X====== M/10.2.159.1 2011-05-01+20-57-46.096 ========

  • Camera app (back + flash) doesn't work

    Hey to all of you,
    for one day now my back camera doesn't work anymore. The screen is just black. The front camera works normally. I couldn't choose the flash light app either in the swipe up menue. I just updatet my software to the newest one. The phone didn't fall down or anything similar.
    Is there anything you can help me with? Thanks in advance for your help. I miss the camera already!
    Kind regards,
    Julius
    Message was edited by: Jules05

    FIX FOR REAR CAMERA AND FLASHLIGHT!!!
    I also had the same flash and rear camera problems as everyone else but I figured it was a software problem.
    To fix the flash/flashlight, simply download the flashlight app. The one everyone used before iOS 7. The flash should work immediately.
    To fix the rear camera go to Settings > General > Restrictions. Enable restrictions and turn the Camera off, then take the restriction off. Check your camera, it should work immediately.
    Hope this answers a lot of questions and saves a bunch of money due to Apple's failures.
    Cheers,
    Tim

  • Lib32-konqueror-nsplugins and flash doesn't work

    Hallo,
    I tried the lib32-konqueror-nsplugins. But it doesn't work because:
    Adobe Flash Player: gtk_clipboard_get(GDK_SELECTION_PRIMARY); failed. Trying to call gtk_init(0,0);
    (<unknown>:6900): Gdk-WARNING **: Error converting from UTF-8 to STRING: Could not open converter from 'UTF-8' to 'ISO-8859-1'
    (<unknown>:6900): Gdk-WARNING **: Error converting from UTF-8 to STRING: Conversion from character set 'UTF-8' to 'ISO-8859-1' is not supported
    So there is a problem with utf8. So I changed en_US.utf8 to en_US in rc.conf rebooted but still the same error. I searched but I didn't find a solution. Can you please help me? (I have lib32-gtk2 installed)
    Stefan
    Last edited by Noneus (2007-09-03 01:14:18)

    Hi Noneus,
    The error message is quite normal you get it in opera too. The problem is (since last weeks updates) you need lib32-pcre. I added it as a lib32-konqueror-nsplugins decency so one else has this problem.

Maybe you are looking for

  • HFR Issues - "5200: Error executing query: Invalid Item ID"

    Hi All, We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio,

  • Error in Distribution of Actual cost in Cost Object Hierarchy

    Hi, I am getting an error while doing the Distribution of Actual cost from Cost Object Node to the assigned Order. Cost element/origin 630000 could not be distributed Message no. KZ468 Diagnosis The cost element/ origin 630000 could not be distribute

  • Can't Launch ConsoleOne due to a font error

    Hi Group, When I try to start ConsoleOne, I recive the following error. Warning: Cannot convert string "-b&h-lucida-medium-r-normal-sans-*-140-*-*-p-*-iso8859-1" to type FontStruct I followed some directions from another forum, but that didn't help.

  • Lost 500mb of space after syncing ipod touch 4g

    hello guys. i synced my ipod touch 4g yesterday to remove a single photo. my ipod has no songs, videos or anything else. after syncing, i was notified that i have a little space left (the one which asks you to go to settings or something, i forgot.)

  • IWeb's future?

    Someone told me iWeb will no longer be supported on Mountain Lion.  Is that right? Love iWeb.  Hate to see it die. Soooo...  if I have iWeb, will it disappear, become dysfunctional if I move to Mountain Lion?  I still working on Snow Leopard. I am co