My friend uses firefox to email me. When I open email it seem to me that firefox blocks my Gmail. So I cannot access my gmail inbox any more. Please show me how to debug this.

My browser is IE9. While I read my friend mails that are sent through Firefox. Suddenly I received an error message "Bad request error 400". Now I cannot access my gmail inbox anymore. I don't know what to do now. Please show me how to debug this so I can go back to my gmail because there are a ton of email in gmail inbox. Please help!!

The following relates to inbox problems in GMail in Nov 2011, no error 400 was seen, only a blank area where the message should have been. Since two people tied into this message this week I think theirs may be a need to update Adblock Plus filters per question [https://support.mozilla.com/questions/896267 896267]

Similar Messages

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj S

I already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.

I was billed of £69.99 for nothing. would any one please advice me how to refund this?

i was billed of £69.99 for nothing. would any one please advice me how to refund this?

Check your purchase history to see what the charge was for. If you did not purchase then:
Change your password
Alert your credit card company and ask them about reimbursement.
Let itunes support know that your account may have been hacked.

I have been with google for while now but I still can't access to google wallet, Would you please show me how? thanks

I HAVE BEEN WITH GOOGLE FOR WHILE NOW BUT I STILL CAN'T ACCESS TO MY GOOGLE WALLET, BOTH ACCOUNTS, PERSONAL AS WELL AS BUSINESS. WOULD YOU PLEASE SHOW ME HOW? THANKS

Seems like that would be a better question for a Google forum since it it Google's app. Here is a link about it from Google:
https://www.google.com/wallet/
If you need further help, I would suggest you post to a Google forum.
GB

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

I have a really old Itunes account. I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year. How can I fix this?

I have a really old Itunes account. I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year. How can I fix this? I have about 70 downloaded songs on this log in that I would like to get back.
Thank you in advance.

Contact iTunes customer support.

Hi, I'm unable to use my speaker when I'm using Mac OS. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi, I'm unable to use my speaker when I'm using Mac OS, which means I'm unable to unmute, decrease or increase the volume. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi Zac, sorry to hear about your troubles, but that's why us other users are here to try to help in these instances.
Open Console in Utilities & see if there are any clues or repeating messages when this connection drop happens.

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatar. How do I remove this - what? cookie?

When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatars. How do I remove this - what? cookie?

I will try safe mode.
I did download Ad Network Detector and opted out of JumpTap and AdMob. Today I found more: MoPub and Millenial which I will opt out of. I had previously opted out of Google Ads on the Cell phone but not on the net - so did that. Allegedly it take time for the opt outs to reach the originators of these pop ups
Thanks all for the suggestions - but not cleaned up yet.
Verizon Wireless Customer Support <[email protected]> wrote:
Verizon Wireless Customer Support created the discussion
"When I open email or texting I am often sent to the Web to either the Playstore to look at a new app or some site that want me to choose some singles site to chat with chick avatar. How do I remove this - what? cookie?"
To view the discussion, visit: https://community.verizonwireless.com/message/1081202#1081202
>

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

Dock application gets killed itself on Lion, how to debug this issue?

Hi, Dock application gets killed itself and it dissappears and relaunches itself after for few seconds, This is happening for every 5 min or so. it is quite annoying problem. how to debug this issue? any help?

When I look the system logs - there is an exception each time I try to run the application or open a window:
9/5/09 10:33:12 PM Linear[23545] Cannot create BOOL from object <Regression: 0x1461f0> of class Regression

I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

A calendar is not difficult nor does it take long once you know where the dates fall.
Start with a basic month template table.
1. Click on the table icon on the Toolbar to create a basic table for one month
2. Click on the resultant table > Inspector > Table > Headers & Footers > 2nd button > 1
3. Inspector > Table > Body Rows: 6 > Body Columns: 7
4. Inspector > Metrics > Size > Width: 7 cm/in > Height: 7 cm/in
You can drag resize the whole month to your liking afterwards
5. Select the entire header row > Inspector > Table > Edit Rows & Columns > Merge Cells > Type in a month
6. Type Mon in first cell & Tue in 2nd cell of of 2nd row > Select both cells and drag the white dot in the bottom right corner sideways to fill the cells with the days
7. Do the same with the dates in the cells below
8. You can fill the spare dates at the beginning and end of the month if you like and maybe change them to a paler grey.
9. Style and position the text as you like it.
10. If you don't want to see the grid or want different strokes, colors etc:
Inspector > Table > Cell Borders/Cell Backgrounds etc
When you have the first month looking the way you want, option drag out copies sideways to make the rest of the months.
Peter

How come my junk email disappears when I open it? for my .me email account

how come my junk email disappears when I open it? for my .me email account

Roadrunner is POP email, and the feature you are looking for
is a function of IMAP email. Roadrunner has not announced
any plans to make IMAP available. If this is important to you,
get a gmail account (which can be setup as IMAP) and configure
your Roadrunner account to automatically forward emails to the
gmail account.

My friend uses firefox to email me. When I open email it seem to me that firefox blocks my Gmail. So I cannot access my gmail inbox any more. Please show me how to debug this.

Similar Messages

Maybe you are looking for