My hp laserjet p1505 print blank pages even i replase toner cartridge

Hey, I have two  hp laserjet p1505 printer in one printer has a problem that it cant print any thing. all outputs are blank. i replace the toner cartridge. and its cartridge work fine in other hp laser jet printer p1505. kindly solve my problem. thanks with regards.

Right click the printer in System Prefences -  Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

Similar Messages

  • Help[: Laserjet 1300: Printing blank pages (new cartridge & drivers installed)

    Hi All, printer keeps printing blank pages, just bought a new cartridge and even re-installed the drivers- can anyone perhaps advise as to a way to resolve as I am urgently needing to print?

    Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page.  That error is related to the fact that it is blank though.
    Thanks for any assistance.

  • Printing blank pages - even with new genuine HP cartridges

    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!

    arcalgud wrote:
    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!
    The document here may help resolve the issue of blank printing on the Officejet 6700. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP LaserJet 4MP Printing Blank Pages

    Hi there,
    This is perhaps OT, but a recent issue with my HP LJ 4MP is causing me great anguish and heartache.
    Suddenly, for no apparent reason, my HP is producing blank pages. It just runs and runs spewing out blank pages.
    I've tried all the IO resets and a cold reset. Unplugging and leaving idle. Unplugged the Asante bridge between the serial and the CAT 5.
    After a while I can get it to stop printing blank pages, it works fine for a while, then the interminable blank pages start again.
    Has anyone seen such an issue? Any known resolution?
    Thanks a bunch,
    Matthew

    Matthew,
    I too use HP LaserJet 4MP and AssanteTalk Bridge connected to computer via ethernet crossover cable and link from Assante to both my LJ4MP and HPDeskJet855cse, using BelKin QuikNet adapters in a string using RJ11 jumper cables.
    My HP driver software is HP8.1.1.
    I Never use "BackGround Printing".
    I Never use "DeskTop Print Monitor".
    The only time I can remember multiple blank copies is when I used to use "Print Monitor and BackGround Printing".
    Clear your preferences and get rid of Print Monitor and Don't use BackGround Printing.
    HTH.......Bob

  • Laserjet 1300 - Printing Blank Pages

    Hi -
    I purchased new cartridge yesterday and am still experiencing the same problem. Last night I re-installed the drivers and the printer is still shooting out blank pages. Is there anyway to resolve this problem myself? -
    Hoping for some help or advice...
    L.

    Matthew,
    I too use HP LaserJet 4MP and AssanteTalk Bridge connected to computer via ethernet crossover cable and link from Assante to both my LJ4MP and HPDeskJet855cse, using BelKin QuikNet adapters in a string using RJ11 jumper cables.
    My HP driver software is HP8.1.1.
    I Never use "BackGround Printing".
    I Never use "DeskTop Print Monitor".
    The only time I can remember multiple blank copies is when I used to use "Print Monitor and BackGround Printing".
    Clear your preferences and get rid of Print Monitor and Don't use BackGround Printing.
    HTH.......Bob

  • LaserJet P2035 prints blank pages.

    It started with printing out duplicate lines that overlapped. Now all it does is print out blank pages. After each page prints out the light blinks next to the triangle symbol. And then I have to power off and power back on to clear it. I have installed the newest driver, upgraded the firmware on the printer, installed a new toner, and replaced the USB cable. Any suggestions on what to look for? I have about five of these printers and the rest are fine (so far).
    Thanks,
    Josh

    Hi @tps1020 ,
    I see that you are having issues with the pages coming out blank. You have already replaced the toner and you still have the same results. I would like to help.
    Most likely it is a hardware issue with the printer or the software, since you replaced the toner and are having the same issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    This ensures the printer is receiving full power and may help this situation. Make sure the USB cable is connected directly to the computer.
    Unfortunately there is no hardware self test for this model. Usually to find out if it is a hardware or software issue, you can print the hardware self test to determine this.
    Try and print a test page from the printer driver.
    Did it print?
    If the issue persists, uninstall and reinstall the software, just to rule that out.
    Uninstalling the Printer Software.
    HP LaserJet 1020 Printer Drivers.
    Test the printer again.
    Are you using Genuine HP Toner?
    Is the Ready light on the printer?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Please let me know the results.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet 1020 prints blank pages

    My LaserJet 1020 printer prints nothing but blank pages no matter what kind of print job I give it. The HP Print and Scan Doctor found nothing wrong, but when I printed a test page at the end of the Print and Scan Doctor's testing, the output paper was also blank. I installed a new cartridge because I thought the old one was out of ink, but the problem reoccurred very soon.

    Hi @tps1020 ,
    I see that you are having issues with the pages coming out blank. You have already replaced the toner and you still have the same results. I would like to help.
    Most likely it is a hardware issue with the printer or the software, since you replaced the toner and are having the same issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    This ensures the printer is receiving full power and may help this situation. Make sure the USB cable is connected directly to the computer.
    Unfortunately there is no hardware self test for this model. Usually to find out if it is a hardware or software issue, you can print the hardware self test to determine this.
    Try and print a test page from the printer driver.
    Did it print?
    If the issue persists, uninstall and reinstall the software, just to rule that out.
    Uninstalling the Printer Software.
    HP LaserJet 1020 Printer Drivers.
    Test the printer again.
    Are you using Genuine HP Toner?
    Is the Ready light on the printer?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Please let me know the results.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Photosmart premium c309g-m printer prints blank pages even with new cartridge

    I have an HP Photosmart premium c309g-m printer and I tried to copy a black and a color document. The printer goes through the motions but the page is blank. I have tried put a new black cartridge in and still prints a blank page.

    Thank you everyone who responded. I would like to let you know my printer is now up and working. It was so nice and helpful of you to respond with links and suggestions. I appreciate it.

  • HP LaserJet Pro CM141 prints blank pages and jams on nothing

    My HP LaserJet Pro CM141 is printing mostly blank pages. Some pages come out with thick, verticle lines of smudged gray but other than that, it's totally blank.  It does this for printing or copying and wireless or connected via USB.  It started doing this after a wierd occurance where it would not stop printing the same print job over and over. After restarting it several times, I finally got it to stop printing the same print job but now, as I said above, it just prints blank pages. It also frequently claims to have a paper jam when it hasn't even attempted to take up a sheet of paper. The scanner still works, it's about 4 years old. The black cartiridge supply is at 90% although the colors are admittedly at 0% (but the lack of color never caused a problem before, I just print everything in black and white.)  I already went through the steps of the trouble shooting guide, http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c02260982

    Since you have only one toner cartridge with toner it is possible that toner cartridge has an issue.  I would try at least another known good black toner cartridge.

  • Laserjet 4M Plus (C2039A) prints blank pages after cleaning?

    I have a Laserjet 4M Plus (C2039A) that was working well.  I was getting toner streaks so I disassembled the covers and cleaned dust and toner out.  Cleaned plastic and plates with soapy sponge, cleaned rollers with alcohol, brushed and used air to clean dust.  I'm good with mechanical projects. After re-assembling, I print blank pages.  The menus, display, and computer interface seem fine.  Paper feeds correctly.  Self Test displays no errors, but I am unable to read printed test results or settings.  I went into Service Mode, and ran Self Test there.  I'm ready to disassemble it again, but do not know where to look for improper fit.  What would prevent any characters from being printed?  I'm using Windows XP drivers, and parallel port cable. 

    Hello kbright,
    Welcome to the HP Consumer printer Forums.
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP Color LaserJet CP3525n keeps printing blank pages without stopping

    Hi, I'm having trouble with this printer, it keeps printing blank pages one after anotther as soon as it is turned on. Some pages are completely blank others have smiley faces and other characters on it. And it keeps doing this even after it has been restarted. Any idea how to fix this problem?

    1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
    2. let it run to initializing.
    3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
    I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
    Cheers

  • HP LaserJet 8000N 'print' blanks PDF files.

    HP LaserJet 8000N 'print' blanks PDF files.
    Tried different PDF programs - same result.
    PDF files prints OK on my other printer
    Any idea why and how to fix?
    Thanks
    Sam

    Hello @samdolev,
    Welcome to the HP Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet 8000N is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps! 
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP LJ 1320 only prints blank pages

    The printer will only print blank pages. Test pages are also blank (including from the Green Button). This is a recurring issue. It was solved in the past by fiddling with the cartridge and mechanical parts inside (we don't know what exactly sovled the problem). Toner is full. I ran the HP Diagnostic Tool and it found no "X"s.
    I verified that the following mechanical parts are functional:
    switch on left side of cartridge door
    plastic tab on top right of door, which connects to laser spring/switch
    spring/switch underneath top panel, which seems to enable laser
    arm/gears to enable paper spindle
    contacts on printer-side of toner/printer connection (this part slides from side to side 1/4 inches, and I tried printing with it in various locations)
    There seem to be no error beeps/tones when the printer starts up or when I close the toner door. (However, it was capable as I bypassed one of the switches and it made an error tone at that point).
    I think it must be something like a dead laser (however, I think the laser is invisible and we cannot test tosee if it is functional).
    Any other ideas/solutions would be appreciated.
    I forgot to mention that the low-toner light is not lit, and we've had this issue with both new and old-working toners cartridges.
    Message Edited by measterbrook on 11-10-2009 09:57 AM
    Message Edited by measterbrook on 11-10-2009 09:58 AM

    Has anyone else had this problem?  I have a LaserJet 1320 that started doing the exact same thing last week.  I'm wondering what I have to do to get it working again.  Anyone know something about these units?

  • InDesign causing others to print blanks pages

    Okay so this is a weird issue and I'm getting no results.
    My issue is simple. After I print in ID anyone else I work with prints blank pages (We're printing through a network to a device). Also cyan prints incorrectly; however that is fixed if I open the print driver from the print dialog. Now the color thing is a problem through all the adobe software (Illy, Photoshop, Acrobat). No matter which program I use cyan prints wrong. But back to the main issue, strictly ID causes others to print blank. It isn't consistent either. A single document could consecutively cause the blanks then not cause them a little later. We've tried ever print driver possible and the problem persists. Another curious behavior with ID in conjunction with Acrobat is if Acrobat is open and I try to export to .pdf from ID then both programs freeze (however no message of either not responding comes up in the activity monitor) and the preferences are erased from ID
    I've spent 4 hrs on the phone with Adobe support and it's just some indian reading from a handbook asking over and over if I deleted my preferences. I've spent days with the printer manufacturer and worked with 7 of their tech specialists and even had them send out a new unit and  still the issues. I need to know if the rest of the world is seeing this. Or if this is even close to something someone has seen
    So from what I'm seeing is a problem with the PostScript writing that's freaking it out but I'm not software engineer so I can't say for sure.
    I'm running CC (though we still had the problems on CS6)
    OSX 1.7
    ID version 9.2.2
    printer  is a Konica Bizhub 554e (it's a laser copier)
    Thanks,

    I actually have created a .pdf and had others print it (a file I create in ID and export to pdf). What ends up happening is if I try to print the pdf people after me get blanks. However if someone else prints it there is no issue. I may have left out an important point I'm the only mac that uses the printer, everyone else  uses pc (and I don't know if that's an issue). I only have a postscript driver available (which is good) but i don't know what everyone else is using. I want to say in all of this i heard they have a PCL driver.
    As far as the router, I'm hardwired into the network so there is no router. Konica and our IT have checked the network and ruled out that possibility (and I don't really know what that means)
    But you are reaffirming the fact it is the printer and they need to fix it. And the fact that a document printed with only cyan is printed with all four colors to give me some weird off color makes me think the disconnect is between Adobe and the printer. But still so weird about the blanks.
    Thanks for the input

  • HP 4700dn Printing Blank Pages

    iMAC running OS X 10.9.2 Printing Blank pages with one saying "%! PS- Adobe - 3.0 %APL_DSC_Encoding: UTF8 %APLProducer: (Version 10.9.2 (Build 13C102"

    Hello Jasper2100,
    Welcome to the HP Forums.
    For the issue of your iMac OS X 10.9.2 printing blank pages from your Laserjet 4700dn, I would like you to review this Apple Forums post: HELP! hp laserjet prints code and infinite blank pages!
    As well, I would suggest posting this in the commercial forums, since this is a commercial product. You can click here for the link.
    http://h30499.www3.hp.com/hpeb/
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

Maybe you are looking for