My HP Mini 110 : Update Problems

It appears like this: when i update my windows it appears like this: " You maybe a victim of software counterfeiting" always in my window-How can i resolve this ? Pls send me steps to fix this... Thank you.
This question was solved.
View Solution.

Here is a strong caution for you.
Follow the instructions in the video and be very precise about it.  Do not make any mistakes while doing anything in the registry editor! 
@Axelin 
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • HP Mini 110-1160SA problem recording sound from sound card

    I am trying to record sound from the sound card itself rather than an external or internal microphone, using a free software called Sonarca Sound Recorder. For example, I play radio from the internet using the BBC Iplayer. I have Windows 7 Starter. When I use the Windows Control Panel > Hardware and Sound > Manage Audio Devices, I get a window called Sound. I press the Recording tab, and get a choice of Internal Microphone, External Microphone, and Stereo Mix. According to my sound recorder software's documentation, I need to select that Stereo Mix, because it means "record whatever the sound card is playing". However, the Stereo Mix recording device, despite having a red tick mark next to it is "Currently Unavailable". How do I make it available?

    to be honest, i am not sure about your problems, normally, you need to set stereo mix as default device, then using recording devices to record sound on windows 7. Since you cannot make it, why not insall a virtual sound device, it works like a real one, install this streaming music recorder on your system, start recording. Just test it out by yourself.

  • Hp mini 110 bios problem

    Pls help.. bios password..
    Fatal error. . . System halted
    [edited Serial Number by Moderator]

    Hi @jmedina1520 ,
    Thank you for visiting the HP Support Forums. I needed to edit  your post and remove the Serial Number. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • WLAN Driver XP Problem on HP Mini 110 3504TU

    Dear all,
    I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU
    "Network Controller?"
    Hardware ID:
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
    PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
    PCI\VEN_14E4&DEV_4727&CC_028000
    PCI\VEN_14E4&DEV_4727&CC_0280
    Product Number : XV876PA#UUF
    SN : {Personal Information Removed}
    My googling results : wlan chipset is Broadcom. I have tried ALL of my search result links (Official HP's Driver Link) on google but just get nothing,
    I've tried anyways to install All of Downloaded Drivers Files (my googling's search)
    in Normal Setup Sequence and Manual way, via "Update Driver" Menu on Device Manager
    but No anymatches found.
    Thanks in Advance before...
    Regards,
    Dave. N
    This question was solved.
    View Solution.

    Hi Paul Tikkanen,
    Yes!, your suggested driver is work!
    I very appreciate for your help response..   *shakehand*
    *Special Big Thanks,
    Best Regards,
    Dave. N

  • HP MIni 110-1030nr - USB Problem!

    Hello!
    I have 2 HP Mini 110-1030nr netbooks. Mine runs like a charm! I love it! 
    My dad's however is having major problems! For the first 2 weeks it ran great, but then the hard drive died in it. We sent it back to HP, they turned it around and had it back to us in less then 2 weeks! Great service!
    But now, as we have been re-installing his software we have discovered the USB ports do not work right anymore. For example, my dad bought an external Samsung cd/dvd-rom drive. It just doesn't work right. It is unrecognized sometimes, or else it will show up but it can't see that a disc is inserted. Same goes for all USB devices... we attached an external WD Passport Hard Drive and it is not recognized either. The Hard Drive lights will light up momentarily and then just go dark. But when you disconnect the hard drive, Windows plays a little "disconnect sound" as if it knew it was there. Other times the hard drive will be recognized and work just fine, or it will work good for awhile then go dark. 
    Some items work fine on the USB ports... we have a little Verizon Pantech USB Data Modem, it seems to work good. And a little Sandisk 8GB USB thumb drive seems to work good consistently. 
    Could this be a power issue? Or something goofy on the mother board? 
    All these devices work 100% superb on my own HP mini, no hiccups at all. Need help! Need to know if I need to send this back to HP or if there is just a setting somewhere that I'm missing? I've tried going into the BIOS (F10) but there are hardly any options to change and none of them deal with USB.
    Thx!

    figured out how to remove the hard drive. You remove the battery and there are 3 small phillips screws. Remove and put in a safe place. The screws hold three small metal tabs in place. With the screw removed, take a small flathead screwdriver and push the tabs up toward the keyboard carefully!!! This will lift the back edge of the keyboard nearest the lcd screen up in the air. Then turn the laptop over and grab the back edge of the key you just pushed up and pull it towards the keyboard and the keyboard will easily come off. Make sure to CAREFULLY remove the plastic ribbon connector from the connecctor and that exposes the harddrive. The rest is very obvious and simple. Reassemble in reverse order.
    [text removed for privacy]

  • [HELP] PROBLEM WITH KEYBOARD HP MINI 110 - 1017TU

    I have HP MINI 110-1017TU.
    warranty expired since 2 years ago.
    my problem is, while i'm type letter
    "p" its show "p0" or "0" its show "0p"
    "q" its show "q1" or "1" its show "1q
    its happen when i pressed
    w,e,r,u,i,o
    i try replace the keyboard with the new one, but it doesn't work
    if i use usb keyboard it working normally.
    i try to take off the batt and plug it again
    now the second problem appears with my password bios
    password check failed
    fatal error system halted
    CNU93330P9
    any solution for this 2 kinds of problem.
    many thank's for help
    note:
    i'm from indonesia, apologize for my bad engslih.

    Dinasty.
    Use that code to go into the BIOS.
    Disable all passwords that are enabled.
    When asked for the CURRENT password use that code.
    When asked for NEW password just hit enter.
    If asked to VERIFY password just hit enter.
    Save and exit.
    REO
     I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • My hp mini 110: bios update screen is displayed but the process repeats again and again, plz help

    My HP mini 110-3107tu: At startup HP Bios update screen is displayed with message "The system BIOS is being recovered"....Writing new BIOS image.....
    Next message is displayed Verifying new BIOS image...
    Thereafter "The System BIOS recovery is complete" message appears. But this process repeats again and again. Please help.
    Is there a solution, how i can recover my netbook or should I take it to the service center

    I have searched far and wide for a workaround that does not involve sending it to HP. Unforunately, I was not able to find such a workaround.
    As a last effort, you can try these steps.
    1. Power off the notebook completely.
    2. Hold the windows key + b keys simultaneously.
    3. Power the notebook on while holding those keys and keep holding them.
    4. Let the keys go when you get a message about BIOS recovery.
    Let me know what happens.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hp Mini 110-1115CA Password Problem

    I have an Hp Mini 110-1115CA and I can't seem to remember my password. I get three attempts to type in the password and after the third incorrect attempt I get this message:                                                                                                                                                                                                              Password check failed                                                                                                            Fatal Error...System Halted                                                                                                            CNU94314TL Do you know how to fix this?? i have my files  in my laptop so i need to open it.. it's important.. hope you can help me ..  

    Hi,          Use the below code to reset e9lovf3vak         (3rd letter is L) Or generate the reset code from the below link http://bios-pw.org/ Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

    Hi,
    I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter.    When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files.  I ordered the recovery  USB flash drive from HP and tried to restore from it.  It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager.  When I try to start Windows without the flash drive I get an error log that is below.  Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
    Carol.
    Error Log: 
    Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
    Timing: Factory Update
    This is not a Regional SKU
    This is not an RCTO P2PP SKU
    Error: Different LOC# detected:
    Error: SKU number LOC# = 00
    Error: REGSKU/OptionDashCode.ini value for ABC = 12
    Error: SKU number incorrect for this LOC#=ABC.
    Next Step: Please dash sku number with xxxxxx-12x
    Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
    [17:16:38.37] ------------------------------------------------------------------------------------------
    ***CTO Error condition has been dtected in [Factory Update] phase !! ***
    [17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
    [17:16:38.38] ------------------------------------------------------------------------------------------
    [17:13:54.75] Start BBOffline.cmd...
    UPDrv=[C:]
    [17:13:54.77] Set UIA Error Code to 951
    [17:13:55.39] WinPE is 32bit.
    [17:13:55.39] Starts [FixUps].
    [17:13:55.41] ---------------------------------------------------------------------
    [17:13:55.41] FixUps.cmd...
    [17:13:55.41] create overall progress info...
    [17:14:15.89] FixUps.cmd completed...
    [17:14:15.89] ---------------------------------------------------------------------
    [17:14:15.91] Starts [Tweaks for SSRD].
    [17:14:15.92] ---------------------------------------------------------------------
    [17:14:15.92] SSRD Tweaks to change user default locale...
    [17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
    [17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
    [17:14:23.50] ---------------------------------------------------------------------
    [17:14:23.50] Launch PININST.exe for Offline ...
    [17:14:33.78] Starts [Sleep 10 sec].
    [17:14:43.86] Starts [Create RStoneFUpdate.INI].
    [17:15:20.91] Starts [create 1GB Pagefile for offline].
    Volume in drive C has no label.
    Volume Serial Number is 868D-C760
    Directory of C:\system.sav\bbv
    10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
    1 File(s) 1,073,741,824 bytes
    0 Dir(s) 38,502,694,912 bytes free
    [17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
    [17:15:21.10] Brand detection.
    [17:15:21.80] ---------------------------------------------------------------------
    [17:16:10.26] Start SysID Check...
    [17:16:13.30] Start Option Code Checks...
    SKU_DEF_COUNTRY=[39]
    SKU_DEF_SYS_LOC=[fr-CA]
    Reset country in administrator...
    Reset country in Default user...
    Reset System localed
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Image Version: 6.1.7600.16385
    Reporting offline international settings.
    Default system UI language : en-US
    System locale : fr-CA
    Default time zone : Pacific Standard Time
    User locale for default user : en-US
    Location : Canada (GEOID = 39)
    Active keyboard(s) : 0409:00000409
    Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
    Installed language(s): en-US
    Type : Fully localized language.
    The operation completed successfully.
    Updated System Locale info..
    [17:16:27.37] Start PIN Tweaks...
    [17:16:28.38] ---------------------------------------------------------------------
    [17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
    [17:16:28.40] ----------------------------------------
    [17:16:28.40] Tweaks for OOBE's Unattend.xml
    [17:16:28.40] to pick up the proper file...
    [17:16:28.41] ----------------------------------------
    [17:16:28.41] rename unattend.org to unattend.or_
    [17:16:28.44] ----------------------------------------
    [17:16:28.44] without Light Sensor..
    [17:16:28.48] ----------------------------------------
    [17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
    [17:16:28.51] ---------------------------------------------------------------------
    [17:16:29.40] Start MIR Tweaks...
    [17:16:30.43] ---------------------------------------------------------------------
    [17:16:30.43] [MIR Tweaks] ...
    [17:16:30.43] ---------------------------------------------------------------------
    [17:16:31.44] Start Factory Update(s)...
    [17:16:33.45] Start QFE Offline installation...
    [17:16:38.13] PININST_OFF: PASSED...
    [17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
    [17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
    ---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
    Result=PASSED
    [17:16:38.24] There was no QFE installation...
    [17:16:38.24] Check FUList.log if there is duplicate Desc...
    Couldn't access C:\System.sav\logs\FUList.log...
    [17:16:38.35] No Duplicated Desc is found... PASSED.
    [17:16:38.37] There was no Factory Update...

    Hi @Savvy58
    I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HP Mini 110-1100 CTO keyboard not working fully

    Hello, everyone;
    My Mini 110-1100 keyboard is acting strangely. Most of the time, certain keys will not register as being pressed. Space bar, the left shift key, t, y, [, ], z, x, c, v, and m all do not work when this happens. Sometimes (rarely) all keys will work from boot. In addition, when it's not working properly. after using it for a few hours or so, the keyboard will randomly work. I'm assuming it is a software problem as opposed to a hardware issue because of this. I am running XP Service Pack 3, with all available updates. I have also tried reinstalling both the keyboard and touchpad driver.
    If anyone has any suggestions, it would be appreciated. Thank you!
    -Don

    Ok, so the drivers are current, an external keyboard works, you could try restoring the system to a date when the keyboard was known to work but I doubt that it would fix it, most likely it is a hardware issue, in which case you should check your warranty and call HP.
    Warranty:
    http://www13.itrc.hp.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475
    Contact HP:
    http://welcome.hp.com/country/us/en/contact_us.html
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • HP Mini 110 battery on 2133 Mini-Note

    Is it possible to put battery from HP Mini 110 on 2133 Mini-Note??
    Thanks in advance on every comment.

    Hello,
    I have a similar issue with battery charging.
    HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
    So I have purchased new battery...
    Now HP Battery check shows same for the new battery:
    Replace (40),Current State: Charging (0%)
    Computer is HP Mini 110 3010sq
    BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
    I have noticed status for "cell voltage 4" is 0 mV for both batteries.
    What could be the problem here?
    Any support is appreciated.

  • HP MINI 110 BATTERY

    I purchased a HP 110 mini netbook from Amazon.  The battery will not click into place and it falls out.  I purchased 3 days ago but don't want to return it as i've set up all my contacts etc.  I notice on the internet that this has been a problem.  Has anyone found a solution?

    Hello,
    I have a similar issue with battery charging.
    HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
    So I have purchased new battery...
    Now HP Battery check shows same for the new battery:
    Replace (40),Current State: Charging (0%)
    Computer is HP Mini 110 3010sq
    BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
    I have noticed status for "cell voltage 4" is 0 mV for both batteries.
    What could be the problem here?
    Any support is appreciated.

  • Mini 110 3000

    anyone know how to access the ram sodimm in a hp mini 110 3000 netbook? No ram door on the bottom of the machine.

    I found the solution after much research, so I want to put it here in case anyone else finds this thread via google.  The problem was the HP Support Assistant software.  I got suspicious when it did some updates yesterday and took almost 2 hours to complete four simple driver updates.  As an experiment I uninstalled it and instantly performance fell within normal levels.  As I write this my CPU is fluctuating between 2 and 12%, and even running games now through DOXBOX or STEAM my CPU doesn't get over 65% or so.
    HP, fix your broken software or don't put it on your machines!

  • Hp mini 110 battery stuck at 0% (plugged in, charging) but not charging

    my battery was working fine this morning, lasted a good 5 hours on full charge... then hp support assistant asked me to update itself and install a whole bunch of drivers for the WLAN and BIOS and all that, so i did. if i remember correctly, the battery at the time the update finished was around 20% and charging... then i unplugged the AC adapter to move it to another spot in my room, then the computer shut off completely... when i plugged it back in and rebooted the battery indicator was stuck at 0% but says (plugged in, CHARGING)....*not "not charging"... so i dont get it...  i've left it alone for an hour and still says 0%... i rebooted and nothing changed.... i did a system restore to bring it back where it was before i did the hp support assistant update....nothing changed... 
    i honestly don't believe it's a problem with the battery itself because it was working fine until today.... and i didnt yank the adapter out of the socket either...
    Any ideas? 

    Hello,
    I have a similar issue with battery charging.
    HP Battery check tool was showing for old battery status: Replace (40), Current State: Charging (0%)
    So I have purchased new battery...
    Now HP Battery check shows same for the new battery:
    Replace (40),Current State: Charging (0%)
    Computer is HP Mini 110 3010sq
    BIOS is updated and computer is working fine with AC adaptor plugged, but shuts dow immediatelly after disconnecting it from AC adaptor.
    I have noticed status for "cell voltage 4" is 0 mV for both batteries.
    What could be the problem here?
    Any support is appreciated.

Maybe you are looking for

  • Error while save framework purchase order.

    dear all i am working SAP R/3 4.7 ides while  creating framework po, i input all the data field correctly , but when i am going to save the purchase order, it given the error Massages  " Indicator for invoice receipt used not allowed Message no. MEPO

  • SAP Short Dumps and PCI Compliance

    We've run into an issue with our PCI Compliance audit around being able to see unencrypted credit cards in short dump messages in SAP.  Has anyone run into this issue? Only work around I've got at this point is to restrict all access to short dumps a

  • DB_RUNRECOVERY or DB_PAGE_NOTFOUND

        i'm using the bdb 4.5.20.i found after plenty of call the "put" and "delete" operation and "sync"  operation with program crush,when reload the database file and call the "delete" operation,i will get the DB_RUNRECOVERY OR DB_PAGE_NOTFOUND error.

  • Message after "uninstall_flash_player.exe"

    I have Windows Vista (without SP1) After executing "uninstall_flash_player.exe" pop-up window (Windows Defender may be...) told me that program (just executed) may be installed incorrectly and asked me: "repeat installation", "installation done corre

  • PWVERSION sql error in dashboard builder

    Hi all We are currently attempting to deliver SAP Strategy Management through the dashboard builder as part of an integrated solution of SSM, Xcelcius and Webi.  When we try to run SSM within a tab page on Dashboard Builder we get the following error