My HP Photosmart Wireless B109n just went dead. "Ink System Failure 0xc19a00222" What to do?

hp photosmart wireless B109n dead. What to do? It only says "Ink System Failure Oxc19a0022 Please turn printer Off and then On". When I do that, I am in an loop, and meet the same message again. The whole machine is dead. Can not scan, print, or do any other thing.
What to do?

Try the troubleshooting steps here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

My 6 mo old iPhone 4S just went dead tonight.,

My 6 mo old iPhone 4S just went dead tonight. Anyone know what could be wrong?

Battery? Use wall charger and charge for half an hour.
Next up: Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Note: you will not lose anything.

HP Photosmart Wireless B109n-z will come online but not STAY online!

In a nutshell: I own a HP B109n-z. It will connect on power on as it should to my main wireless access point and print from all computers on the network. After a while the printer will go offline. Web-interface cannot be reached, the printer will not respond to ping.
To remedy the situation, turn of printer, turn on again on front switch. Printer will connect to wireless AP and print in less than a minute. The printer is currently located 30 miles away from me, so hitting on/off is not an option for me. This printer needs to just STAY online as long as access point and power is supplied. I am - as I write this - connected via remote desktop to my Win 2k8 server, and I get no response when I ping the printer - however everything else on the network works, and I actually see the printer in my routers wireless section. It is just if the printer is in some kind of hibernation.
I've read several topics about the HP Photosmart Wireless B109n-z that goes offline and it seems to be a general problem with this printer. It also seems to be a generel answer from HP forum operators to ask what router the user is using - and then stating that that particular brand of router is flawed and the newest firmware should be installed, then try again. That move seems like a stall to me.
Please - dearest HP support - do NOT give me that answer. EVERYTHING else in my network setup works, and works ALL the time, every single day. The problem, whatever it is, clearly resides in the printer itself. All my automated daily network operations with regards to back-up and file distribution and automatic emails, plus remote operations have all been running every day for more than a year without needing maintenance. The frustration with this issue is immense.
Please help me get this solved once and for all. Help me make the printer stay online until I turn it off.
My setup:
1: Main ADSL-modem/router/wireless accesspoint is some kind of Sagem - and I can't do anything about that, it is provided by the only ISP that operates in the area (I live in Denmark). Don't know what box it is - but it uses 'Fast3504_5AD038' firmware. Broadcasts SSID, using 802.11 b + g and WPA/WPA2, running DHCP
HP B109n-z have static IP outside of DHCP range, and is placed ind same subnet as the rest of the network.
2: Attached hardware to entire network:
One Windows Server 2008 R2 Enterprise Dell machine cabled to the Sagem box. Running 24/7/365, controlled externally using MSTSC remote desktop every day.
One Linksys WRT54GL router cabled to the Sagem box, running DD-WRT firmware, used as a secondary wireless acces point with its own SSID. Provides wireless internet acces 24/7/364 for laptops and smartphones in the house.
Three HD digital TVs cabled to the Sagem box, receiving IP-tv signal (individually, not same channel/signal)
2 phonelines (sharing number)
The WRT54GL have a cabled connection to a Windows 7 X64 workstation, providing internet access via cabled onboard LAN from workstation and cabled connection from WRT54GL to Sagem box. Used every day, most of the day.
3 laptops connects wireless to the WRT54GL access point, which in turn - as said before - is cabled to the primary Sagem box, used every day, most of the day
HP B109n-z connects to the wireless access point given by the Sagem box without problems.
All three TVs are connected with CAT-6 cable, all other cables are CAT-5
Best regards,
A danish person

OK, I'll give it a shot, but ISP-supplied routers can cause lots of problems - search these forums and you will see that.
Let's set a static IP at the printer, which includes directing the printer to the DNS server, which is sometimes helpful:
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
If this does not work, you can add a "standard" router (Linksys, Netgear or such) to your ISP router and turn off the ISP's wireless. I have seen this work well many times. You can turn the ISP's DHCP off as well, but you may have to open a port to the "standard" router. Attach all devices to the "standard" router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

All data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ?????

all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????

You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

HT201407 My i-phone just went dead. when I plug it to recharge the batery, the only thing that it shows is an apple cut in the middle. What happened? What should I do?!!!

My i-phone just went dead. When I plug it to recharge the batery, the only thing that it shows is a sign of a broken apple. What happened? What should I do?!!!

Try resetting your iPhone. If that doesn't work, try to restore the iPhone.

MacBook just went dead! Please help.

OK I've been using Macs since 1986 and have done techie stuff for many Mac users but this issue has me stumped. I have a MacBook black, 2.0GHz C2D, 120GB drive, 1GB ram, 10.4.11. I bought it new from Amazon this past April. This Mac has been running flawlessly since its purchase accept for a few random not waking from sleep issues. Closing the lid and opening it after a few seconds would wake it up. It has a 10GB Boot Camp partition running XP which I seldom use. I just recently updated to 10.4.11.
The Problem: While in use the machine just went dead, sort of. The screen went black and no sound is heard. I tried to wake it using a number of keyboard moves. When all failed I tried to hold the power key down to shut it off and restart, but nothing happened. The only sign of life is when I mess with the power button there is a flashing green light coming from the small pin hole just to the right of the video camera. There are actually 2 of the pin holes to the left and right of the camera but the flashing only comes from the right one. This happens while plugged in or running from the battery. We usually run it with the power cord plugged in and this was the case when it went dead on us. I know it's not completely dead because of this light activity. There is also some random light activity coming from the small row of lights on the face of the battery. I haven't really noticed what triggers those lights I just noticed they came on randomly when I would look at the bottom of the machine now and then.
Any ideas on what's going on and how to get me running again?

the same thing happened to me and after the multiple tech steps to revive a dead beast....i went to the genius bar at my nearest apple store....the tech agreed it was a faulty motherboard as i was getting NO power to even the keyboard. we also tried a firewire target disk mode to see if i can even access the HD. we took out the HD to verify that the data was still in fact intact. but oddly enough nothing happened. to give some insight i was importing video from my mini DV cam and it didi a semi kernel panic greey screen shut down and never came back up
the funny thing was, i ended up helping other people who were coming in for service while they were working on mine...6 people in all...and when i left, some of the people still waiting were saying where's the genius going? LOL!
i pray they will upgrade my logicboard to the SR chipset one.....i want i want i want an early xmas present!

Printing with HP Photosmart Wireless B109N

Hello,
Could someone tell me if HP Photosmart Wireless B109N is compatible with printing on iOS 4.2.1 ?
Because it doesn't work for me...
Thank you!

The B109 is not on the list of printers that implement AirPrint:
http://support.apple.com/kb/ht4356
http://www.hp.com/sbso/printing/mac/apple-airprint.pdf
This year's version of that printer, the B110, does support AirPrint

HT201412 my Iphone 4 just went dead without warning and is not getting started even after putting it up for charging. Any Suggestions guys???

Hi
I have an Iphone4 and i am living in SA.
Today in the morning, my Iphone4 just went dead without any warning.
It is in this dead mode even after i tried charging it.
If i connect it to itunes, i find that the itunes is unable to detect the iphone.
And to my disappointment, i believe there is no apple store in SA.
Any suggestion guys???????

Try a reset:
- hold the home button and sleep/wake button down at the same time for atleast 15 seconds
- if you see the Apple logo appear rlease both buttons
If that fails try charging the iPhone while plugged into the wall adaptor and also while plugged into the computer. Try cahrging both ways for atleast 15-20 minutes. Also while its plugged into the computer check and see if the computer or iTunes will recognise that the iPhone is connected.

Iphone5c just went dead and won't turn on at all

IiPhone 5c. Just went dead with 28% still on it and won't turn on even plugged in. I had it on car charger when it happened.

Hey yoohoogrammy,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with your iPhone 5c powering on. The following resource may provide a solution:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Thanks,
Matt M.

HT1430 my fone just went dead black

my fone just went dead black wont charge

Hey marshamary,
Thanks for the question, and great troubleshooting so far. To completely isolate the issue, you may want to follow these steps:
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
For additional information, see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks,
Matt M.

T42 Just went Dead

My T42 has been working just fine for about 3 years. It just went dead and when I try to reboot it gets as far as painting my desktop wallpaper page and then just sits and spins. It never starts any apps and the HDD light stays lit constantly ... not even winking at me. Any help out there?

Welcome to the forum!
I suspect that your hard drive is going bad. Try to remove it and boot to BIOS without it.
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I was on my phone and it just went dead

I was playing a game and my phone just went dead. I thought it was the battery so I charged all night and it still wont come on.

try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.

Iphone 4 Just went dead. Won't boot up. What do I do?

Iphone 4 Just went dead. Won't boot up. What do I do?

nope...
i'm heading to Genius Bar now...thinking that i need to do the fire wire target thing...i just don't have anything to target to...

I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so. Today it just went dead and will not do anything. Any suggestions?

I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so. Today it just went dead and will not do anything. Any suggestions?

Hard reset by holding down the home button and the sleep/wake lock button (BUtton on the bottom of your display, button you use to turn the screen black) hold them both down for 15 seconds till you see the apple reappear

Another mini just went dead

I have been reading a few threads about iPod mini's that went dead. That's because I have the same problem with mine and clearly it doesn't seem to be that exceptional. I have my mini about 14 months now which means it's out of warranty. I'm not using it very frequently, only when I'm travelling and once in a while in the gym. Last time I've used it was about 3 weeks ago and everything was normal. I wanted to charge it again for my next trip to the US this week but it just isn't working anymore, apparently it just went dead. My local Apple store said they can't do anything about it and since it's out of warranty, they cannot replace it, which I can understand. They offered me a new mini for a lower price, but I think it's still too much for a replacement only 2 months after warranty. I also don't understand why they didn't tell me about the battery replacement plan, about which I just read on the site. I requested to buy a new nano for a lower price in exchange of the mini, but they refused.
Anyway, it seems there's nothing I can do except complaining here and share this with the rest of you. Obviously, I'm very disappointed that I lost my mini just a few days before my trip, not to mention the money spent on an item that went useless too quickly. But also, this was my very first Apple product, which I liked so much and made me excited about the rest of Apple's stuff. I was planning to buy an iBook, I was looking forward to the next generation iPod (maybe after nano?).
The thing is, I didn't damage it at all, it actually still looks new, and nothing happened with it. It feels very unfair because I cannot put the blame on anyone. However, if this is how Apple products work, I don't think I'll spend another penny on them.

JL4, thanks for mentioning the possibility of resetting my iPod. That's what I did and my mini is working again! I know it makes me look like a complete moron after complaining about it, but just consider: I went to the biggest Apple Centre around and they said it was dead themselves!
And Carl Worlf: I was not in a real huff. I was only very disappointed because it's so unfair that it just stopped working, seemingly without any reason. I always treat my stuff with good care. My mini was perfectly working at one time, the next it didn't respond to anything anymore. Well except then the famous reset method.
Finally, I think it's fair to blame Apple support for a) not mentioning (their own!) battery replacement program (I knew because I found it on the web when returning from the Apple Centre), and b) they apparantly don't know how to reset an iPod.

My HP Photosmart Wireless B109n just went dead. "Ink System Failure 0xc19a00222" What to do?

Similar Messages

Maybe you are looking for