My I pad stopped sending print material to printer b210 or b210 stopped receiving from I pad

My I pad stopped sending print material to my b210 printer OR my b210 primer stopped receiving material from my I pad. Help if you can . Thanks Tom

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
AirPrint Setup and Troubleshooting
http://www.apple.com/support/ipad/assistant/airprint/
How to print from your new iPad using AirPrint
http://www.imore.com/print-ipad-airprint
AirPrint Basics
http://support.apple.com/kb/ht4356
 Cheers, Tom

Similar Messages

  • How to stop receiving from a mail account but still send from that account

    Hi
    I was wondering if anyone knew how set up a mail account that will send but not recieve. Basically, I would like it to stop going to the server and grabbing emails from this account, but I want to be able to send emails from this account. Is this possible??
    Thanks!

    Welcome to the Discussions.
    Very possible and very easy to configure. First, in Mail Preferences/Accounts/Advanced deselect to include when automatically checking for new messages. Second, click on Mailbox in the menubar, choose Online Status, and click to take this account Offline. An account that is Offline can still be used to Send.
    These two steps, together, will accomplish what you need.
    Ernie

  • For the past week I cannot send emails to msn or hotmail. I can receive from them. I use aol

    I cannot send emails to msn or hotmail. This has been only for the past week....Up until then everything worked fine. I can receive emails from msn and hotmail. I have aol.

    Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • My email on imac stopped receiving from all my accounts. Suggestions?

    My email stopped reciving email yesterday from all of my email accounts. If I go directly to gmail, myuw, comcast, etc, all email are there. Suggestions?

    Is your network connection working? Can you get to the internet in Safari?
    Have you checkd Mail preferences to make sure the account data is still OK and that Enable this account is On?
    If so, then shut down Mail and restart. If that doesn't work, shut down the Mac and restart.
    If still no joy, Repair permissions.
    If still no joy - create a new user accouint on the Mac, set up one of your Mail accounts and see if that works.
    If so, go back to your existing user accout, archive any mail on the Mac you want to keep, delete the accounts that don't work and recreate them.
    Hope that helps

  • Print  ' Receipt voucher'   for  checks received from  customer

    Hi
    I  want  to   issue   'receipt vouchers'   to  customer when  i receive  checks  against  invoices.   When   i  make payment ,  a payment advice is generated.   Like wise,    the customer wants an acknowledgment  of  the  checks he  pays.
    Thanks for  your advice.
    kamala

    Hi
    I  found the  solution.
    In    SE38,  select  program  RFKORD00  and   give  the  company code and  document nos.  Select  Correspondence type SAP01.
    Execute .   
    Additionally   do  settings in   Fin Acct  Global Setting -Correspondence-Sap script based forms  and  assign the  form   F140-PAY-CON-PH1     to   prog RFKORD00.
    Following link is useful :
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/01/a9cf0d455711d182b40000e829fbfe/frameset.htm
    kamala

  • Using RDI Interface to send print data to SAP PI

    Hi,
    I have never used the SAPScript Raw Data Interface, but I now have the task to send printing information to SAP PI and
    from there to a print service.
    I see, that I could send the printing documents as IDoc, but is it also possible to call for example a function/program, where I could process the print data and then send it to PI?
    Each different print document needs to have it's own sapscript form to derive the necessary fields of content, right?
    Has anyone an idea, what I could do? Can anyone give me an overview about the possibilities of the RDI interface?
    Thank you very much!
    Michael

    Please check the element "Dealer_code" in your SAP system . Is it a data element or a field? i dont think that is defined in your system.

  • How to stop neighbor from sending stuff to my printer

    Hi An anonymus neighbor keeps sending prints to my wireless printer. I have no idea what to do to get him to stop...he's waisting all my ink and paper...Any advice would be most appreciated!Thank you :-)

    You have provided no data. Is this wireless? What SSID's are you using? Is Wireless Direct enabled on the printer, if so anyone can print to it. You need to disable Wireless Direct and only connect wirelessly to your router following the complete and detailed instructions in the User Guide.

  • 'unable to send print data' on HP Laserjet 1536dnf MFP

    Hi there,
    I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
    I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
    Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
    I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
    Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
    Thank you very much! Regards, Luc.

    Hi jemenake
    I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
    Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
    If this doesn't resolve the issue continue to the next steps.
    Print a  configuration report from the  LaserJet 1536dnf.
    Press the Setup button, (the one with the wrench on it)
    reports, press OK, Config Report, press OK.
    Check to see if the ip address is valid.
    If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
    Delete printer on mac.
    Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the  button on the bottom left corner of the screen.
    Add printer on the mac.
    Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
    If the ip address is not valid please let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I stop messages from my i phone coming thru on I pad as well ?

    How do I stop messages from my i phone coming thru on I pad as well ?

    Settings>Messages>Send and Receive at>You can be reached by iMessages at>uncheck the phone number on the iPad and check your Apple ID as the contact at address.

  • Sending print data..... Epson printing woes

    Connected to my Macbook Pro 17" (10.6.2) is my relatively (Important bit) Epson R285 printer. The other day it started to refusing printing full stop. I would send a print job, and get the external 'Sending print data....' and that would be it. I thought I was going mad, I reinstalled the drivers, deleted loads of preferences, ran Onyx a few times and nothing.
    At the same time, the 'low ink' light was flashing but like everyone else i just ignored this. I was ready to reinstall the OS and all my apps I was so desperate! I have VMWare Fusion running XP so I thought, worst case I can always print from there. Time to put the new ink in. Since it was a new printer it had those 'test, half-empty/half full cartridges' installed so €45 later, 3 new inks were installed.
    On a whim, I tried printing again from 10.6 and low and behold..... it printed! Now this raises a couple of questions:
    1. Why doesn't the print dialogue be more explicit in this situation: Hey 'I am not going to print unless you top me up' Granted there is a 'low ink' light and icon but not a 'bugger off, I'm not gonna print icon'
    2. Is this Epson forcing the user to buy new ink? I always use to print regardless what ink was missing, invariably I just needed to print and could handle an odd colour. Now, low ink means, 'go buy more ink and I shall print!'
    Anyway, anybody who has similar 'Sending print data...' print issues with an Epson printer, check you ink as it may just solve your printing problems!
    regards, chris

    Chris§ wrote:
    1. Why doesn't the print dialogue be more explicit in this situation: Hey 'I am not going to print unless you top me up' Granted there is a 'low ink' light and icon but not a 'bugger off, I'm not gonna print icon'
    By any chance are you using the "Gutenprint" driver for your printer? A poster in another thread noted that switching from a Gutenprint driver to a driver from Epson enabled the ink status capability.

  • Documents in subcontracting when sending the material to sub contractor

    Hi
    I have created the purchase order for subcontracting and i have issued the material in mb1b (541)
    In which document we will be able to send the material to vendor.
    any idea pls

    Hi,
    Use the same GI message type only(WA01, WA02, WA03)
    But whn we configure the automatic message determination for this
    select trans/event id as - WO
    and print Item as GR/GI slip for subcontractor - 3
    Thanks & Regards,
    Kiran

  • My iphone 4S stopped receiving and sending text messges. Help!

    My iphone 4S stopped receiving and sending text messges. Help!

    Hi J.A. Curie!
    Here is an article that can help you troubleshoot this issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My iPhone 4S has stopped receiving iMessages, cannot send/load any pictures over whatsapp, cannot join the wifi in my house anymore. What has happened to my iPhone i haven't made any changes?

    My iPhone 4S has stopped receiving/sending iMessages, cannot send/load any pictures over whatsapp and cannot join the wifi in my house anymore.
    Essentially all the things I use my phone for have now stopped working. I constantly have 3G connected (even though i dont want to use it, i want to connect to the wifi in my house) but still when I try to download/ send a picture over whatsapp it comes up with an error message saying the server is unverified, or something equally ridiculous.
    I deleted the app so i could reinstall it (as if that would help), but the app store is started saying "unable to connect", despite 3G, so that bright idea died out pretty sharpish.
    Whenever i try to turn on iMessage, it asks for my Apple ID password, which I know I've typed in correctly because I reset the **** thing about 4 times due to it apparently being "incorrect". Even so, it repeatedly asks for the password over and over as soon as I've entered it, saying it was "unable to connect" before a final "incorrect password" message pops up just to add an extra smack of annoyance.
    I haven't changed a single setting on my iPhone whatsoever. It just suddenly started spiralling into what is now £28/month-worth of pure frustration.
    I don't even have any music or photos on it as I had to free up 3.5GB of space on the **** thing to allow it to update, naively thinking that would solve the problem, but alas it did not.
    I have seen a few questions posted like this one, usually just one of the problems I have, but I seem to have rounded up the whole bunch (lucky me). None of the previously posted questions have received any replies.
    Can some please help me! Honestly, if i see another "unable to..." or "unverified source" pop up again I'll probably smash the thing against the side of my house.
    Cheers.

    On your iPad, go to [Settings > General > Reset > Reset Network Settings] Once that is done, re-connect your iPad to your wifi network.

  • How do I stop iCal from sending notifications everytime I change a shared calendar or event?

    iCal sends a notification (not an email) to all users of a shared calendar whenever an event is added or edited. How do I stop that?

    as far as i understand iCal it is on the "receivers/subscribers" side to deal with email-updates (and not on the "senders/changers" side):
    snippet from my Re: How do you stop receiving notifications about updated calendar events? (there is a screenshot as well):
    to NOT get email notification about updated events from a shared calendar you subscribed to you have to uncheck "events affect availability" in that calendars "info" (mac os X.7 and X.8: iCal —> calendars dropdown —> right click on the subscribed calendar —> choose "get info" from the context-menu —> uncheck "events affect availability")

  • Go to Offline status after sending print in HP

    Hi everybody.I have two HP Laserjet 4100. Both of them after sending print from windows go to offline status and an error message appear (Yellow Error BOX in notification area).Printer screen show Ready message. The light on the printer is green and fixed. I connect printer with LPT cable to PC.I can get test print from printer menus without any error. I test printer on windows XP 32bit and windows 7 64bit. I get driver from HP Support And Driver Download Center. I install any type of driver (XP 32bit/7 64 bit/ Universal PCL5)I try to use Doctor Hp to find problem but this application is not support LPT connections. I do Cold reset and reset maintenanc counter (With holding left arrow of Items and Value keys).I used 3 diffrent and new LPT cable. I confused and tired!Please help me to solve this problem.Thanks

    Right now it appears you are having communication issues from the computer to the printer since the printer will print test pages.  The first thing you will want to do is use one of the 32bit computers attached with parallel cable to test communication from the port to the printer.  With the printer connected to the port and I assume the lpt port is lpt1, go to start and run and type command and hit enter.  At the prompt that appears in the black box type cd\windows and hit enter. Now at the C:\windows prompt, type dir >> lpt1 and hit the enter key.  Does the printer data light start to flash and does the printer start to print pages.  If it does, then communication is fine and you need to remove and reload the printer using the correct driver.  If it does not print then you have an issue with the port on the computer, the cable or the port on the printer.  Since it happens with two printers I would think that would eliminate the port on the printer.  You may want to check the port setting in the BIOS of the computer.  Most ports are Standard, ECP and EPP.  Best to set the port for Standard when using an old legacy printer.  Good Luck.

Maybe you are looking for