My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

my ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

It means that your phone crashed during the updating process and is now in recovery mode. See this article:
iPhone and iPod touch: Unable to restore

Similar Messages

Laptop stop working while updating bios

Lately when i turn on my laptop, the screen is black, caps lock and scroll blinking twice, i read that i should update my bios.
The problem is when its updating ( insydeFlash is running half way ) i noticed my laptop stop working.
The window is on, i can see everything on screen, even the sound of my laptop, but i can move the mouse, well >.>
I dont know what should i do? Should i turn off my laptop?

, Hello and thanks for posting on the HP support forums. When it comes to a bios update the rule is if it isn't broke don't fix it. If it is locked and not responding then the only choice you have is to do a hard reset first. HP Notebook PCs - Performing a Hard Reset or Forced Reset Once you have done that here is a link for doing a bios recovery. HP Notebook PCs - Restoring the BIOS Thanks again for posting and have a great day.

Urgent N73 stopped working while updating softwar...

while i was updating the phone software via nokia software updator it says a critical error occured and update failed and itb is possible that ur phone is no longer working proppely, u can try recovery >>>>>>>>>> the phone is no off and isnot working , i tried to remove battery but it doesnot help, and i tried recover many times but it says lost connection with the phone via USB cable and it is connected but the phone is off....
what shall i do now pls as fast as u can.

sadly your only solution is the nokia care center and for future please use original windows... now the nokia suite tends to malfunction a lot on the pirated versions of windows any sort turning the phones into bricks. get ORIGINAL windows
Join my movement to bring a change in NOKIA for good by supporting my FORUM
http://discussions.europe.nokia.com/t5/Eseries-and-Communicators/NOKIA-MODERATORS-ONLY/td-p/1318965

IPhone stopped working while updating to ios 6.

It won't turn on and doesn't show up on iTunes when connected.
It was fully charged. I tried holding the home and power button simultaneously for upt to 20seconds but nothing happened. HELP!!!

So, my home button has been working fine for the past few days.
Simply plugging it into the computer and doing a regular sync seemed to do the trick.
Like the original poster, I upgraded to IOS6 over wifi and immediately started having problems with the home button being slow or not working at all. I plugged my iPhone 4 into my Mac with the intent to either restore to a fresh IOS6, or fall back to IOS5 if that didn't work. I let it sync one last time, but that took a while and I had to unplug and run off to work before doing any kind of restore.
And somehow the home button has been fine ever since (knock on wood).
So, if anybody is having the same problem, and you normally sync and upgrade over wifi, just try plugging it into your computer to see if it works for you.

New ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

new ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

Change the rice and dry for another couple of days. Then:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 if 64 GB one and $99 for the other 4Gs.. They do not fix yours.
Apple - iPod Repair price

Why does my line-in audio port quit stop working while recording?

My set-up is a bit confusing, so I'll try and be very specific.
I record into Garageband via the following set-up:
Microphone(s) run into TASCAM 4-track -> RCA-to-Stereo Cable runs out of TASCAM into MacBook Pro via the single audio port.
This generally works fine for several hours, but the last 3 times I've had a recording session, the audio signal has dropped to virtually nil without any warning. At this point, even yelling into the microphone (with the TASCAM max-ing out) will only produce 1 volume bar in the "Line-In" system preference screen. At best, it sounds like a very quiet whisper.
My microphone is working (works while recording to tape) as does my cable (RCA - to - Stereo) when used in other situations. Any ideas as to why this is happening? Am I tripping some sort of internal line-in volume...protector? (Is that even a thing?) Or do I need a new audio port?

funny how to one seems to have an answer for this, I just posted my own issue, audio in line port just stopped working after update.

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine?

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.

The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0

ITunes has stopped working while sync photos

I have been having problems since I updated iTunes to 10.4, it keeps crashing (itunes has stopped working) while sync photos. After uninstalling and re-installing the problem still stayed. I therefore tried sync photos a batch at a time (15 photos at a time) IT WORKED but I still cannot sync my videos. I think that the problem is that this new version of itunes cannot cope with big files and therefore it crashes. I HOPE THAT APPLE WILL SORT OUT THIS PROBLEM

downgrade to itunes 10.3 as 10.4 broke this feature. if not, just unclick the include videos box and your sync should complete. here's hoping apple fixes this in itunes 10.5.

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply

My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4

iPhone 4, same thing. It gets stuck at Step 1: backing up

Earpiece stopped working after updating to 5.0.1.

It worked fine the night before. Then it stopped working after updating to 5.0.1. I can only hear calls on speaker. Did anyone else have this problem. I have tried all the fixes, restart, reboot, restore. No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen. Nothing covering the earpiece. Tried to blow out headphone jack with compressed air. I'm thinking it is a glitch in the software. Using Iphone 4 on Verizon. Any thoughts or ideas?

you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

Similar Messages

Maybe you are looking for