My ilisten 1.7 freezez on startup, can anybody help
i just purchased ilisten 1.7 for my macbook pro. i installed it but each time i try to launch it, it freezes and says 'application not responding'. i've tried uninstalling and reinstalling it but it doesn't work. I dont know if anybody has had similar problems. Can anybody help
Mac OS X (10.4.8)
iListen is not an Apple product. For support go to the iListen developer's site, www.macspeech.com.
The Apple Forums only provide support for Apple products.
Similar Messages
-
i have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??
Have you tried "Run" instead of "Save?"
Do you have anti-virus software on the PC? If you do, try disabling the anti-virus for just 15minutes to allow the download to finish.
Hope one of those helps. -
My iphone 3GS keeps freezing and showing the apple logo during phone calls. Can anybody help plese ? Bja
Hiya thankyou for the answer.
Trying to set it up as a new device but can't find the backup to save it.
I have no "mediasync" folder in my library/application support. Did these folders get moved around with Lion?
Thankyou again, -
I downloaded a book and now it won't open. Also I am unable to close ibooks. Can anybody help?
Hi marthaciffone,
Thanks for using Apple Support Communities. I would recommend first forcing iBooks to quit to see if that helps:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If the issue continues, most of the remaining troubleshooting steps in this article are applicable and might help:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Cheers,
- Ari -
Can anybody help fix my itunes
my itunes randomly stopped opening one day and now it wont let me reinstall it, can anybody help me fix it?
The error code is 2330.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
After OS X 10.8.5, i cannot change my wallpaper background, it always jams and become irresponsive, can anybody help me out?
I solved the problem, turns out my previous MLion or Lion OS was having bugs and corrupted. So when i update and install a new OS on top of previous corrupted one, it will be still corrupted. So i backup all my files and formatted my Mac using (Option key during startup) then reinstall MLion and everything works perfectly fine. I had a 8GB pendrive with Mac OS X Install file in it. The file was around 4++GB. So after formatting, i rebooted with (Hold option key duuring restart) then log in to my pendrive, and installation of fresh new copy of the OS started automaticaly, Now everything works perfectly fine.
-
I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .
I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2). -
I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?
I looked for plugs in in my library but the folder internet plugs in is empty
-
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.
Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495 -
My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?
Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out. -
I have been trying to put music I bought on Itunes on my Samsung Note 2 but my media player won't play m4p files so I tried to convert the files to mp3 but I couldn't, because a message says they are protected files. I then tried downloading different media player apps to see if they would play them but had no success.Can anybody help with a solution to this problem?
First quit iTunes and look in your iTunes folder.
On Windows, the iTunes folder is in your My Music folder.
On Mac, the iTunes folder is in your Music folder.
Follow this path: iTunes > iTunes Media > Music >
Here there should be all your music folders. Open the folders containing the music that is not playing. Right click "get info" (mac) or right click "properties" (windows).
This window will tell you the file type. iTunes will play music in AAC, MP3, and Lossless, etc.
If the files are .wma you will need to convert them into ACC or MP3 format for it to play on an iPod. In iTunes, highlight the tracks that you want to convert, then on the menu bar, Advanced > Create AAC/MP3 version and the tracks will convert. Delete the old files.
If the file extenstion is anything like .exe .txt .rar then you don't have an audio file. -
I have an 8gb ipod which has only 1200 songs on it, no photo's, no apps and no video's and it's telling me that my storage is full, can anybody help/
The number of songs that any iDevice will store depends on both the length/duration of songs and on the audio format(s) used. The figure of "1700" is nothing more than an estimate ... probably based on 3-minute songs and low bit-rates. There is no definitive number - your iPod's capacity is based on available memory (which, for an 8Gb iPod is actually around 7Gb). Best way to manage the content of your iPod is to create one or more playlists that are then used as the basis for sync operations (set this up when your iPod is connected).
-
Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {8140112A-43D0-41D6-8B36-BE146C811173}
Description: Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address: 10.5.7.196
Subnet Mask: 255.255.0.0
Default Gateway: 10.5.0.1
DHCP Enabled: Yes
DHCP Server: 172.18.255.2
Lease Obtained: Tue Apr 23 10:14:40 2013
Lease Expires: Tue Apr 23 22:14:40 2013
DNS Servers: 121.97.59.7
121.97.59.2
121.97.59.3
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.
-
I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?
I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.
Maybe you are looking for
-
How do I create equal space between multiple tabs in Pages?
I am trying to create four center tabs with equal space between each but can not fiqure out how to achieve this. I owuld like to avoid using tables becuase I am trying to make sure the document is fully cross-paltform (Word, Pages, Open Office, etc.
-
Response object in JSP Dyn page
Hi SAP EP Gurus, I want to use response.setStatus() mehtod in jspdynpage but it is not working as expected. I am able to use other methods of response object like response.write(). As per my knowledge if i set response.setStatus(200) is should send e
-
Help! Does anyone know how to fix this and still use the Bluetooth? If i turn off the Bluetooth, USB playwork works fine but I need both to work. Thanks, Colin
-
Using ipad 1& component video cable to view hulu on the tv
Bought component video cables from apple, hooked up to tv & ipad. No video from hulu. Any ideas? Have i exceeded the capability of this?
-
Jdbc drive for oracle7.3.4 is not working for me
I try have download the JDBC Driver for Oracle7.3 which is 'jdbc73402-nt.zip'. When I run my testing program, I got this error message 'Exception in thread "main" LinkError: no oci804jdbc in java.library.path'. I have compared the contents of the two