My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

Similar Messages

I want to upgrade my imac 10.4 Tiger to Snow leopard but will not install as it states I need 1GB RAM please help?

I want to upgrade my imac from 10.4.11 Tiger to Snow Leopard, I have tried to install but it states I need 1GB RAM to install
can anyone help as to what I need to do next.
Thanks

Go to a site such as OWC's or Crucial's and buy the RAM.
(124598)

MacPro 3.1 will not upgrade to Snow Leopard

Hi. I have a MacPro 3.1 with 2 x 3.2 GHz Quad Core Intel Xenon Processors, 6 GB of Ram. The computer is a standard Apple Unit.
I cannot get it to install Snow Leopard. Info elsewhere on this site suggests it should run under Snow Leopard. I have put the system back to Factory state with a clean install of 10.5. It still will not accept the Snow Leopard.
I suspect the problem may be me trying to use installer disks recently supplied with my new MacBook Pro 13", 2.53 GHz. Can anyone confirm this issue. If I buy another copy of Snow Leopard, that is not apparently Machine specific, will it install?

Yes, the disks are your problem. All you need to erase and install Snow on you MP is the $29.00 Snow upgrade disk. You do not need to ever had have Leopard installed.

Java 7 will not install on Snow Leopard

Greetings,
Java 7 will not install on Snow Leopard. Th installer gives a message saying it only works on Snow Leopard.
I am sure millions of people are having this problem, but it is a pain to register to report it.
Please fix.

it is a pain to register to report it.So you are aware that you aren't reporting it by posting here.
Please fix.So now you think you are reporting it by posting here.
You aren't. This is a user to user forum. Not the Oracle help channel.

HT1444 mac pro will not successfully load snow leopard

mac pro will not successfully load snow leopard 10.6 ? presently using 10.5

Haha! That's true. Though I've noted many users here calling a Power Mac a Mac Pro and visa versa.
When my Power Mac died and I brought it into the Apple Store to have them look at it, the first Mac Pros hadn't been out that long. Even the staff didn't know the tower Mac they had out on display was a Mac Pro. I pointed out that it had two optical drive bays in front. Only the Mac Pros have two. All Power Macs have only one.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Aperture will not work after snow leopard instalation,

Hi,
I have avoided upgrading to Snow Leopard but my children bought me the upgrade for Christmas as they want me to use Face Time. So I did, now aperture will not open and it says contact the originators of the program. I am a pro photographer and all my current work is on Aperture and I have a wedding in two days time and so this is somewhat disturbing as all my post production in done in Aperture. Can anyone help me I have done all the software upgrades etc.....

Are your images files managed in the Aperture Library, or Referenced? Do you have an external disk drive in the configuration, and if so, is it formatted as Mac OS Extended?
If you hold down the Option key while clicking on the Aperture Icon in the Dock, do you get the dialogue that allows choosing between different Aperture Libraries, or even creating a New Library?
Ernie

I downloaded snow leopard but will not install...

I downloaded Snow Leopard but it will not install as it say's I need latest Mac osx - I have OSX 10.8.2 it but still will not let me install?
Is this the only virus protector for Mac?

smith_kris wrote:
So what is MBP? and what protection can I get for my Mac?
The MacBook Pro is a laptop > http://www.apple.com/macbook-pro/
Respecting to virus protection, OS X has got its own security systems, so you don't need any additional application. If you want more information > http://www.reedcorner.net/mmg
Finally, you are running OS X Mountain Lion, the most recent OS X update, and as you don't have any problem with it, leave this version and you will save headaches

Installing Snow Leopard but also Boot Camp or Parallels

I have a 2006 MacBook (Intel, core duo) and have a 320 gb HD, 2 gb RAM, running 10.5.8.
I'd like to install Snow Leopard but also would like to partition my HD and install Boot Camp (or Parallels 4.x - I have that version, fully paid etc. but not version 5 of Parallels. Or should I move to Parallels 5 if I move to Snow Leopard?)
I have a full bootable backup (2) on FW400 LaCie External HD's. I have the SL Original DVD.
What is the best way to do this? At present I have 60 gb free space (about 20% of the 297 gb formatted total space available).
Thanks for any comments! Oh, yes - I'm anticipating a new MacBook Pro 13" any time now (Thought the new ones would be out by now!) - Well it will come with SL installed; and I will order one with a 500 gb HD (or larger if available then). Can I migrate my current MB data and files to the new MacBook using migration assistant? But what if I want a partition for BootCamp and Windows (XP likely as I have that)--? Should I partition the new MBP HD first (can I partition it without erasing everything?
Best regards,
Steve Schulte
Sunday 14 March 2010

Frankly, were you to run Parallels 5 you should have more RAM installed, but your model cannot support more than the 2 GBs you have installed now. You would be better off running Windows via Boot Camp on that machine. However, the new computer will have 4 GBs of RAM installed so it is better suited to running Windows via Parallels. And, yes, if you run Snow Leopard you need Parallels 5.x both for compatibility and performance reasons.
Open Boot Camp Assistant and click on the wide button on the left to print out the documentation. Read it carefully before using Boot Camp Assistant. Yes, you partition the drive without erasing it, but you can only have one Windows and one OS X partition on the same drive. Otherwise it makes no difference when you use Boot Camp.
Your XP must be a retail installer with SP2 and only the 32-bit version. You cannot use an OEM installer that came with another computer.

I receive e-mails from Quilted Paradise and they have pictures on their forum. These pictures will not display in Mozilla Firefox but will display in Internet Explorer. What do I need to do. Also, a larger reading area.

I receive e-mails from Quilted Paradise. People post pictures on this site, but, they will not display. Internet Explorer, they will display. Also, the reading area is way too small.

If I save the page as a web archive and then open it MS Word - I see the following text at the bottom:
<div class="noscript"> To use wikis, enable JavaScript.</div>
JavaScript is enabled - via Tools / Internet Options / Security - the checkbox for Active Scripts is set to enabled.

Win 7 in Boot Camp: Drivers will not install from snow leopard cd.

I have a early 2011 Macbook Pro (8,1). I am loading Windows 7 with Boot Camp, but cannot get any of the drivers to install. (ethernet, video, etc)
I have tried both the Snow Leopard cd (I think it's Boot Camp 3.2?), and also downloading drivers online, neither work. I have tried reformatting/reinstalling, and even tried loading a old copy of XP and I had the exact same problem there too.
What happens: I install the drivers successfully, restart, and nothing has changed. I can see the drivers installed in the programs list (when I go to "uninstall programs") but if I go to Device Manager all of the devices (ethernet, video, etc) show a yellow triangle and say they need drivers! It's like I'm installing the wrong drivers or something.
I can't find any other posts with a problem like this, I have been working on this forever and am kind of at my wits end. Any ideas??

Don't believe what Apple posts.
If you don't have EFI64 like 2008 and later Mac Pro, then you will run into a hurdle and have to modify the Windows DVD to get it to boot and install.
To Apple, and due to the non-standard way they implemented UEFI, and that ours (2006/7 Mac Pro) all there was that we got was the 2005 EFI32 (affects our choices in graphics cards too).
I installed 32-bit, then installed 64-bit on another partition.
The DVD can be modified, from Windows, most easy method would be from any of the VMs like VirtualBox. Then use one of the 2-3 Imgburn or other tricks mentioned online (search for "Jowie" and search for the "Select CD-ROM" error you get trying to boot).
FAQ, Updates, etc http://www.apple.com/support/bootcamp
System Requirements: http://support.apple.com/kb/HT1899
Windows 7 FAQ: http://support.apple.com/kb/HT3986
List 64-bit Compatible: http://support.apple.com/kb/HT1846
Boot Camp 64-bit 3.1 http://support.apple.com/kb/DL979
Boot Camp Vista Upgrade Utility http://support.apple.com/kb/DL977

HP Laserjet 4100 will not print in Snow Leopard

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?
Chuck Stewart
< Edited by Host >

Well, another week has gone by without a solution.
Again, here is the problem:
I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

Quark 7.5 Will Not Print In Snow Leopard

I've been running my networked G5 (OS 10.4.11) for years with no problems using Quark, PhotoShop, Illustrator, etc. I recently bought a new iMac (OS 10.6.2) and migrated the G5 files to iMac. Worked through a few bugs and adjustments, however QuarkXpress documents will not print to my printers (Xerox Phaser 5400 and Lexmark C540). I can print simple Quark documents (text only), but as soon as I try any complex documents, the job spools to the Phaser and then is cancelled. On the Lexmark an error of "900 Firmware Error" appears. All other applications, ie, InDesign, Photoshop, Illustrator, Acrobat and various other applications print fine to both printers. Obviously it's an issue with the Quark software, but I haven't been able to resolve. Any insights?

Yes, I can create PS or PDF files for print, but would prefer not to do a workaround. I would call Quark but I've seen their posts indicating they do not support QX7.5 in the Snow Leopard environment. Also I've seen other posts regarding QX printing problems and Quark advised upgrading to 8, which didn't seem to resolve most of the printing problems I've read about... thank you for the suggestion.

ITunes will not open in Snow Leopard

For inexplicable reasons, iTunes will not open. I am using an Intel iMac with a 2Ghz chip and 3 gb of ram. I have tried deleting iTunes and reinstalling, deleting plug-ins, and running Disk Warrior 4.2. Nothing works, and Apple wants me to pay $29 to talk to someone on the phone. Since this is a Snow Leopard issue that seems unfair. Is anyone else running Snow Leopard unable to open iTunes, and if so, how is the condition fixed?

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

Time Machine will not backup after Snow Leopard.

Pertinent information:
Macbook Pro pre-aluminum body
Time Machine backing up over network to a ppc mini with 500 gb external drive.
This worked fine with Leopard for over a year. I installed Snow Leopard last week and this is the first time I got a chance to try a Time Machine backup. Doesn't see to want to backup no matter what I do.
I tried:
- Renaming the sparsebundle
- Disconnecting/reconnecting the external drive.
- Re-selecting disk in Time Machine config and nothing works.
- Even ran Verify Disk and Repair Disk on the external drive. Found a header error, but Disk Utility said it was minor and fixed it.
It seems that Time Machine isn't even trying to figure out what needs to be backed up. Here is the log. Below this snippet of the log I will post some of the other things I see...
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Starting standard backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Attempting to mount network destination using URL: afp://[email protected]/Backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Mounted network destination using URL: afp://[email protected]/Backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Warning: Destination /Volumes/Backup does not support TM Lock Stealing
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Warning: Destination /Volumes/Backup does not support Server Reply Cache
09/12/2009 - 7:01PM Sep 12 2009 7:01:33 PM com.apple.backupd[5688] Disk image /Volumes/Backup/mbphome_001ec2038641.sparsebundle mounted at: /Volumes/Backup of mbphome
09/12/2009 - 7:01PM Sep 12 2009 7:01:34 PM com.apple.backupd[5688] Backing up to: /Volumes/Backup of mbphome/Backups.backupdb
09/12/2009 - 7:01PM Sep 12 2009 7:01:36 PM com.apple.backupd[5688] Event store UUIDs don't match for volume: Macintosh HD
09/12/2009 - 7:01PM Sep 12 2009 7:01:38 PM com.apple.backupd[5688] Node requires deep traversal:/ reason:must scan subdirs|new event db|
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Stopping backupd to allow ejection of backup destination disk!
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Backup canceled.
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Failed to eject volume (null) (FSVolumeRefNum: -138; status: -36; dissenting pid: -1)
09/12/2009 - 7:01PM Sep 12 2009 7:01:48 PM com.apple.backupd[5688] Ejected Time Machine network volume.
Notice the:
Destination /Volumes/Backup does not support TM Lock Stealing
and:
Destination /Volumes/Backup does not support Server Reply Cache
Does anybody know what that means?
I also see this maybe every third time I try a manual backup. There are many more lines, I'll post a few for you to get the gist:
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-16-173353
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-20-192750
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-27-220252
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-09-09-013744
Can't really find any info on any of these errors. I search through discussions and it doesn't seem that anybody is having the same problems as I'm having, seems they are having different problems.
Thanks in advance for any kind of information you can provide on this problem.

Unfortunately a "full reset" didn't do it. The log looks almost exactly the same...
09/12/2009 - 11:26PM Sep 12 2009 11:26:47 PM com.apple.backupd[1141] Starting standard backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:47 PM com.apple.backupd[1141] Attempting to mount network destination using URL: afp://[email protected]/Backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Mounted network destination using URL: afp://[email protected]/Backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Warning: Destination /Volumes/Backup-1 does not support TM Lock Stealing
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Warning: Destination /Volumes/Backup-1 does not support Server Reply Cache
09/12/2009 - 11:26PM Sep 12 2009 11:26:50 PM com.apple.backupd[1141] Disk image /Volumes/Backup-1/mbphome_001ec2038641.sparsebundle mounted at: /Volumes/Backup of mbphome
09/12/2009 - 11:26PM Sep 12 2009 11:26:50 PM com.apple.backupd[1141] Backing up to: /Volumes/Backup of mbphome/Backups.backupdb
09/12/2009 - 11:26PM Sep 12 2009 11:26:52 PM com.apple.backupd[1141] Event store UUIDs don't match for volume: Macintosh HD
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Stopping backupd to allow ejection of backup destination disk!
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Node requires deep traversal:/ reason:must scan subdirs|new event db|
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Backup canceled.
09/12/2009 - 11:26PM Sep 12 2009 11:26:55 PM com.apple.backupd[1141] Ejected Time Machine disk image.
09/12/2009 - 11:26PM Sep 12 2009 11:26:55 PM com.apple.backupd[1141] Ejected Time Machine network volume.
Still confused over the "does not support TM Lock Stealing" and "does not support Server Reply Cache"? Are those the possible causes? I'm really at a loss cause like I said in my reply before, Time Machine just always worked.

My iMac will not boot through Snow Leopard but will boot through Windows OS

Similar Messages

Maybe you are looking for