My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

Similar Messages

Updated to Mavericks:cd/dvd drive no longer works since update. How do I fix this?

I updated my macbook pro with the Mavericks update last week. Since then, my cd/dvd drive no longer works.
It worked until I did the update. How do I fix this? Can I delete the update and if so how do I do that? or
is thiere a fix for this?

1. Reset PRAM. http://support.apple.com/kb/PH14222
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Seagate external hard drives don't work after installing Mavericks 10.9

I have a 3 year old MacBook Pro. I upgraded the system to OSX Mavericks 10.9. Since then my computer does not recognize any external hard drives. I have a 1 TB Seagate external drive and a Seagate Free Agent 750 GB hard drive and my mac does not recognize either of them. Prior to the upgrade my Mac could read and write to the drives. Below is the message I receive when I plug in the 1TB hard drive.
The NTFS volume that you're trying to mount (/dev/rdisk3s1) has not been unmounted properly.
This may mean that the volume is in an inconsistent state, and mounting it with NTFS-3G could lead to data loss. You are recommended to attach the drive to a Windows computer and unmount it properly with the "Safe remove hardware" feature to guarantee the safety of your NTFS volume.
Please help.

Have you tried the recommended steps? If the Windoze machine won't allow you to safely eject, restart the computer and try ejecting again.

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

Exactly what did you do?
The correct steps are
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
My guess is that that you have not switched iphoto to use the external drive yet - opttion launch and select libary
LN

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb again?

Creating a Mavericks USB boot drive after the horse has bolted. Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file? Do I need to re- download the whole 5.29 Gb from the App Store again? My problem is my 4Gb/month allowance on a 12 month contract. I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

HI tasclix, it depends what you mean by an OS X boot drive.
If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X Mavericks.app"; see this article:
http://support.apple.com/kb/HT5856
Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
Message was edited by: SilverSkyRat

After installing Mavericks I can't copy music files to an external music server, worked fine before mavericks

After installing Mavericks, I can't copy or move files to a music server running Vortexbox(Fedora Linux based). I get a cannot perform operation, you do not have permissions for some items. The permission arrow in get info shows I have both read and write permission. I am connecting to the server fine, just can't copy files.

Hey tamckellar,
It sounds like you want to move your iTunes Media folder. The following article outlines how to do so:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/HT1449
If your hard drive is nearly full after loading all your music and other media into iTunes, or if you just want to move all those music and media files to another hard drive on your system, here's a way to make the move while retaining all your playlists, ratings, and play history.
Thanks,
Matt M.

ITunes disables my CD drives when I installed. How can I correct this problem.

ITunes disables my CD drives when I installed. How can I correct this problem?

1.Open about:config in Firefox (simply type about:config into the address bar and hit enter, if you doing it for the first time, you may have to promise you are going to be careful)
2. Search for keyword.url from the filter box at the top.
3.Double click on this entry. It will open a dialog where you can edit the ‘keyword.url’ string
4. delete anything in there (if there is anything) and copy in the following:
http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=

After getting my 2007 imac's HDD repaired, the super drive stopped working... How can i fix this?

After getting my 2009 imac's HDD repaired the super drive wont work anymore... How can I resolve this?!

I think you need to contact the repairer, and explain the problem as something may not have been reconnected properly on the re-assembly. That is not to be assumed as fact, so taking a diplomatic approach along these lines in negotiation would be in your interest.

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

External Hard Drive not working after installing mavericks

After installing mavericks, I hooked up my external hard drive,
and it would not show up on the computer. Tried checking if
it showed in utilities, also a no show.
Should I uninstall the ntfs software which is a few years
old and instal a newer version?
Looking for a solution which doesn't involve reformatting my nearly full
1TB EHD, please :)

I think I have version 10.8.6 of mavericks, not 10.9.

Time Machine backup on external drive no longer working after upgrade to Yosemite

Can anyone explain why, after upgrade to Yosemite, Time Machine is no loger working? Backup on external drive stops few seconds after it has started. What can I do?

Welcome to Apple Support Communities
Try running a DVD Lens Cleaner disc through it, a little bit of dust or dirt is all it takes to throw them out and it might just be co-incidental with the upgrade.

Optical drive doesn't work after installing itunes 11.0.5.5

After updating to iTunes 11.0.5.5 my optical drive does not work. I have put the same CD in another PC and it works fine. When I right click on the optical disc drive in 'Computer' I get the error message "Windows cannot access the specified device, or file. You may not have the appropriate permission to access the item." If a CD is in the drive, the drive will either keep popping open or not open at all on its own. The CD will not open in any other player such as Windows Media Player either.

I read this article:
http://www.gearsoftware.com/wiki/index.php/CD/DVD_drives_disappear_after_install ing_iTunes
I did not have any AFS drivers.
This is what I did and my optical drive is now working:
1. Backed up iTunes
2. Unistalled iTunes
3. Tried to install iTunes 10.7 for Windows 64
http://support.apple.com/downloads/#itunes
4. When iTunes tried to launch I received the message "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"
5. My computer would not recongize the optical drive at all now
6. I re-installed iTunes 11.0.5 for Windows 64
http://support.apple.com/downloads/#itunes
7. All my iTunes data is there and my optical drive works now
Note: I should clarify that before uninstalling iTunes 11.0.5 my optical drive worked sometimes. It would play maybe one song, both in iTunes and Windows Media Player and then stop working. The drive would also pop open on its own whether there was a disc in there or not. Also sometimes I had to manually open the drive with a paper clip.

We are losing memory from the hard drive, how can we resolve this issue?

We are currently have a memory leakage from our hard drive. We have an Apple imac running snow leopard. The memory appears to shrink as we use our computer.. This is a conundrum for us, any advice on how to resolve this issue would be appreciated..

This is normal. Mac OS X dynamically assigns memory as needed. If you are down to the last 15% of free space, this can get out of hand, and I recommend keeping your hard drive clean of non-essential files*:
http://www.macmaps.com/diskfull.html

Cd drive doesn't work after installing iTunes

I installed iTunes and started to try and rip cd's into the library but the cd drive isn't working any more.. Something about the driver, which I updated, or it also says the registry is incomplete for the cd drive. I ran into this once before on another computer, but I forget how to fix this. I tried to do a system restore to before I installed iTunes, but my computer wouldn't let me restore. Any suggestions?

Hello banjo1971,
The following article provides steps which can help correct this issue and get your disc drive working with iTunes again.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Cheers,
Allen

Hard drive crashed, having trouble recovering photos. How can I do this?

My hard drive crahsed a while ago, so I had to buy an external one to hook up to my mac to replace it. After the crash, I used this external hard drive as my new computer. The old hard drive was broken, it wouldn't let you edit or change any files on it, but it let you view all of its contents, and open it. You just couldn't delete, remove, or change anything, it's like a read-only file. All of my photos were on that hard drive, and I found the iPhoto Library, where they were all stored. Like I said, I can open these files on my new hard drive, so that's what I tried to do, but it says that it can't open the Library, because the version of iPhoto I have is a later version than what the iPhoto library is. This is probably because my OS went through many updates on my new hard drive, after the old one broke.
How can I recover these photos on the older iPhoto Library? Right Now, I have iPhoto '08, 7.1.5, so the library i'm trying to open is some version earlier than that, though I don't think I went through many updates, so it's possible it's still '08, just an earlier version.
Does anybody have any advice?

FIrst off it sound like you might have a permissions problem with your old drive - you could try the support forum for your computer to see if anyone there can assist in actually fixing that problem
As to upgrading - each newer version of iPhoto can open (and convert as needed) older versions of the library - so iPhoto '08 version 7.1.5 should be able to open (and convert as needed) any library from iPhoto 1 through iPhoto '08
If the conversion is not working then you have a damaged library and need to load your backup or rebuild the library after backing up - depress the command and option keys and launch iPhoto and rebuild the library
LN

My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

Similar Messages

Maybe you are looking for