My images will not auto resize for viewing

This is somewhat embarrassing. When viewing images from the web, if they're too large to fit the current window, they get re-sized to fit. Okay. I have a file/page of thumbnails generated by XnView and when I click, the image is loaded, everything is good except the image is always larger than the window. The problem is Firefox WILL NOT auto-resize the image to fit. If I right mouse, I can select "View Image" to view whole image, but I don't want to have to do that for 1000's of images.
Any help/insight would be appreciated.
Regards,
Dave

Lilly.Love wrote:
Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

Similar Messages

  • Fash Images will not load with Firefox

    Currently Flash images will not auto load with Firefox on my mac 10.4. All flash images show with an arrow I must click to make them appear every time I visit a page.
    I do have the most updated version of Flash (10.2.152.33). I have checked their site for all troubleshooting possibilities as well as the FF forum & nothing has made these images auto load. I do have load Images automatically in my Preferences: Content. This is only happening with Firefox & not all browsers.
    I do remember having to add some Security: Install Add-On Exceptions a few updates back in FF back when I had this problem. Adding them fixed the problem, however the next update made the issue reoccur. I've looked for additional exceptions & possibilities to include & found nothing. My current list of add on exceptions include: addons.mozilla.org, getpersonas.com, & update.mozilla.org. Removing these does not fix the problem & re-entering them does not fix the problem. All flash images still show as arrows that must be clicked to load to view for my Firefox browser only. This does not occur in any other browser.

    alright. I've found that Firefox has a Flashblock setting & I have found a way to disable it if I customize & add an icon to my toolbar however I would like to learn how to change that setting without having to add that icon. Where in the settings does it allow me to change/adjust the flashblock?

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • TS1398 Since I upgraded to iOS 7.0.2 my phone will not auto-connect to the home WiFi network.

    I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network.  Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data.  The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
    Is anyone else seeing this problem?

    Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.

  • Disk Images will not mount and Disk Utility will not runru

    I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted diskutility prefs. I am able to run Disk Utility from the Startup DVD of Tiger. On first run, it verified and repaired permissions. I run verify and repair permissions several more times from Startup DVD and everything is fine. But Disk Utility on my startup HD will not work. Similary, NONE of my disk images will mount. No matter what Disk Image i try to mount, nothing will. And I cannot use Disk utility to mount them! So, no matter what I download, no images will mount. And thirdly, when I try to run software update, it will not work. I do get a message: it says, "Could not load Software Update." Finally, i tried to download Onyx to delete log files, etc.. but again, the disk image will not mount. I was able to install a dashboard widget called "maintidget" and was successful in running the daily, weekly, and monthly maintenance tasks. Can anyone help? Everything else works fine!!! All apps! Safari, Mail, iTunes, MS Office, everything works fine. Thanks for ANY help!

    Previously, I had run verify permissions, repair permissions multiple times(from startup DVD) - no probems found. Deleted disk utility prefs. Run the maintenance taskes (daily, weekly, monthly). Nothing worked. But, I forget to check the drive for problems. So I ran disk scan. It found "invalid node" and repair disk could not do it. So, do I erase and do a fresh install or get DiskWarrior? I am running Leopard so I do not have Time Machine but I have backed up my documents, iTunes Library, iPhoto Library, etc... Another thing I found out the hardway is to sync all your bookmarks, mail settings and messages, etc... with .mac if you have an account. Any more suggetions?

  • Captivate 7: slide with mouse will not auto advance after publishing

    After I export my Captivate video, any slide that has a mouse object on it does not auto advance. I suspected that maybe the clicking sound file default attached to the action may have become corrupted, so I opened the sound file attached to "single-click" from Captivate. In the VisualClicks folder, there were no sound files. So, I opened the ClickSounds folder and attached the Mouse.mp3 file to this action. After publishing the training, the slide still will not auto advance. The slides that do not have the mouse action advance automatically as they should. The sound file may not be the issue (going to try to uncheck all of the Mouse Click Sound check boxes and republish to see if that helps).
    Was hoping to find a solution for future videos.
    Each slide is basically a layer of audio > slide > png file > the occasional smart object and/or text > mouse. I have no quizzes or video.
    When publishing I use the following setup swf/html5 with swf + html5 checked and scalable HTML content checked. We use Google Chrome and I've had numerous people try my HTML link after I've uploaded all files and everyone has the same issue. 
    1- Do you happen to know why the mouse action would cause the slide to not auto advance, and if so please let me know a solution so the user doesn't have to click next. If the mouse itself isn't the culprit, any other suggestions on what could cause this?
    2- Is there a way to make changes to the audio or override the mouse properties on all slides? I tried right clicking and "use the current mouse pointer for all slides" but it didn't change any of the properties. Thankfully my video is only 110 slides or it would have been even more painful.
    Captivate 7
    Windows 8.1

    Of course! Here ya go
    For the record, I did create a new project with only two slides to try and duplicate the issue. I had the same problem. I unchecked the Mouse Click Sound check box, republished and the slide auto advanced. I'm wondering if a default sound file was somehow moved or deleted? I discussed uninstalling and reinstalling C7 onto my laptop, but that's a frustrating solution haha

  • Why Safari 6.0 will not auto complete the password ?

    Why Safari 6.0 will not auto complete the password ? even when the option is selected in autofill tab, and the user-password are listed in the password tab ?
    It used to work fine before I upgraded to mountain lion.
      Tks

    Same problem for me since upgrading to ML.  Safari remembers autofills for some passwords but not others.  For example my web mail password was no longer auto filled.  Checked in the keychain list and all the info was there. Therefore I deleted this and tried again - but Safari did not offer to remember the password.  Than ran an old script I had that is designed to "Removed autocomplete=off from 0 forms and from 2 form elements, and removed onsubmit from 0 forms. After you type your password and submit the form, the browser will offer to remember your password." Safari then offered to remember the password.  I accepted this and checked that the password was then saved in keychain - it was. However, next time I tried to access the email Safari once more did not auto complete.  Very frustrating, especially as some auto completes do work.  I hope apple sort this out soon.

  • Banner image will not display in Dreamweaver; can you help?

    Banner image will not display in Dreamweaver; can you help?

    If the banner image is not displaying, it is either not in an acceptable web file format (optimized for web as jpg, gif or png). Or it is corrupted.  Or the path to the image file on server is broken. 
    It's impossible to say more without a link to your problem page.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

    Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
    I Turn it off/on  and nothing changes.

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • Images will not appear on Stage area of Adobe Flash Professional

    I have Adobe Flash Professional CS5.
    Yesterday I successfully created an animation.
    Later the same day I tried to create another and the images will not appear on the stage.
    I loaded in PNG files - which worked the first time - now they will not show up.
    I can see their binding boxes on the stage, and move those but the images just do not show up.
    When I hit ctrl + enter to preview, I can see the images in the preview movie - just not on the stage working area!
    I tried restarting, shutting down, updating my PC, uninstalling programs, loading different file types (jpg), and resaving and reloading the PNG files. I even tried different types of Flash defaults. NOTHING WORKS.
    I hope someone can tell me what is wrong this makes no sense!

    Before you drag the image from the library to your stage, make sure you insert a blank keyframe (F6) on the layer you are working with, then drag to stage. This worked for me.

  • Thumbnails of images will not show

    When using bridge on some of my computers, thumbnails of images will not show, only a generic .eps icon.  We are trying to view files from an Art Explosions CD library and are using Bridge CS6 V 5.0.0.399

    Check this:
    Project - Properties - Flex Compiler - Additional compiler options:    -use-network=true
    If this post answered your question or helped, please mark it as such.

  • Disk image will not initialize.

    After downloading several times, disk image will not initialize. Dialog box -"The following disk images couldn't be opened Firefox 33.0.2 not recognized."
    Mac OSX 7.5.2

    Thanks for the reply - unfortunately I can not see the Firefox Disk image, the file that I downloaded shows up, but does not create the Disk Image required to begin the installation process.
    I have re-downloaded the file from Mozilla several times with the same result.

  • After updating with Security Update 2010-001, Quicken will not auto update.  Auto update function in Preferences are also inop.  Numerous posts in Macbook discussions about similar problems with other apps.

    Installed Security Update 2012-001.  Now Quicken will not auto save and the auto save function in Preferences cannot be changed. There are numerous similar comments in the Macbook discussions about other apps.   Come on, Apple, we need some help out here!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

    garysm99 wrote:
    Not familiar with structure view. How do I go there?
    click in IDVD on this button

  • IPhoto images will not appear in Media browser

    After updating my iLife apps (iLife '09), iPhoto images no longer appear in my media browser. In iMovie, it just says "Loading iPhoto Images", but never does. I am using a Macbook with OS X 10.5.8 and 2 GB memory. Images will not appear in iDVD either. Anyone have any thoughts?

    Do you still have the old library? Rebuilding it with iPhoto Library Manager would preserve most of your work.
    This will creates a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

Maybe you are looking for