My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks
Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?
Similar Messages
-
Hello,
When I click on "Show the Project Library" on Final Cut Pro X program, my computer unexpectedly quits.
I just purchased an iMac 27in screen, (16G Ram) and all the features suggested by the Apple representative to run Final Cut Pro X.
The program was working well for about a week. Afterward, I downloaded all my iMovie projects. I'm wondering if that has created this problem.
Any suggestions as to what the solution might be? Thanks.
JackOver the year I've used FCPX, it' s gone through "spells" where specific actions would crash it - much as you describe. Trashing preferences has nearly always fixed things. Several times, when it did not, I reinstalled the app.
However, I've never imported an iMovie project so I can't give any first hand advice. It will be interesting to see whether FCPX opens if it doesn't see those projects. (per Tom Wolsky's advice.)
Russ -
I'm using a Canon HV20 video camera that uses digital tape. After importing to my Events Library in Final Cut X, there are some timecode breaks between clips resulting also in gaps between the clips. Is there a way to avoid this?
Thanks Russ. I'm a beginner but Lynda.com has a video on making an archive, so I'll follow her video to try this method.
-
I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
The animation such as mission control and full screen and especially, launch pad performs really slow.
Sometimes, mission control doesn't even show the animation.
This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
Does anyone experience having similar problem?thanks for the reply!
I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
here's my screenshot. can you see any problems?
and here's another -
Hi all, my external hardrive is no longer being recognized on my Macbook pro after I tried to transfer some documents from another Macbook( that used the Lion operating system) to mine. i'm currently using the Mac OS X 10.6.8. Any suggestions on how to fix this?
I suspect the drive got disconnected, somehow, on that other system and corrupted the drive because of the Disconnection.
Connect it to your system and open Disk Utility and see if the drive is even being seen. If it is all the data on is more then likely lost and it will need to be repartitioned and or just erased and reformatted. -
I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
peHi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L. -
Network drives do not show up on Desktop or in Sidebar
I have a user who is experiencing a weird problem. When they connect to a Windows server over our LAN, the server does not show on their desktop, nor does it show in the sidebar.
I have checked the boxes in Finder/Preferences to show network drives on the desktop and in the sidebar, but the network drives do not show up.
I have reproduced this on another Mac, a G4 also running 10.5.8 .
The windows servers do appear in Go/Network, and the user can connect to them, but they still don't show up on the desktop or the sidebar.
Does anyone have any good ideas about this?
Thanks in advance!Templeton, I'm sorry if my message wasn't clear, but I have already tried that.
I'm beginning to wonder if there might be some issue with this in 10.5.8, since this works on the Macs here with Snow Leopard, and it used to work when we had Macs on earlier versions of OS X.
Again, I'm open for any ideas on this. -
External Hard drive doesn't show in the event library?
Would anyone know why my external HD mounts to my computer, yet does not show up in my event library window?
Thanks for any help.
Evanjohng67 wrote:
Hi Everyone,
FCPX won't list two of my 6 external hard drives in the Event Library, including my all-important video hard drive (a 2TB drive I use for my videos). There is absolutely nothing wrong with any of my drives. They work in Finder and in every app I have, and Disk Utility says that they are perfectly fine. These two drives show up as "Cameras" in FCPX for some reason. All the other drives show up fine in FCPX, even the drive I use for my Time Machine Backups. The two missing drives are formatted exactly the same as the drives that do show up (Mac Journalled) and they all connect through USB -- there is literally no difference between the drives, so there shouldn't be a problem for FCPX but there is.
Does anyone know why two drives don't appear in the Event Viewer (or appear as "Cameras") while 4 other drives appear perfectly well???
These drives either have names like "Video" or folders inside that are usually in camera drives, like "DCIM".
If you rename the drives or folders that are causing it, FCP X will see them as drives. No need to erase or reformat anything, just figure out what names to change: e.g., renaming a drive "Video" to "johng67 Video" may be all it takes.
Remember that for example an SD card from a camera that you plug in to your mac sd slot appears to the application just as a volume; if you copy it entirely to a pen drive or a large hard drive they would all appear the same.
FCP X has to apply some heuristics to try and figure out if it should treat it as a hard drive or a "camera". No such heuristics can be 100% accurate - that's why they're heuristics.
Message was edited by: Luis Sequeira1 -
hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??
If there is a problem with your AppleID, you - and not the provider - must
straighten out the matter.
AppleID disabled:
http://support.apple.com/kb/TS2446
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action -
Is anyone familiar with Pro Res data from the Sony F3 and Final Cut 7?
Hi,
Recently I've been using the Sony F3 camera for a short film. I used anamorphic lenses. My problem what I have now is, that I can´t get the aspect ratio in Final Cut 7 right. I only have the option to crop, but that´s not what I need.
The final image is cinemascope.
I´d be happy if someone can refer me to a tutorial or a side where I can sort out my problem. It´s kinda urgend.
Thanks so much.
FlorinaIf you want your sequence to be in a 2.31:1 aspect ratio, create a new sequence and type Command + 0 [zero} to see the sequence settings. Set the frame size to 1920 x 831:
and click OK.
FCP is designed to work best with standard frame sizes, this non-broadcast frame size may cause playback and other issues.
If this were a project I was working on, I would be to edit the video letterboxed in a standard 1920 x1080 frame, and after completing the edit, output a master QuickTime, and take that QuickTime into Compressor and crop it for delivery in the format(s) needed for distribution.
MtD -
I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...
I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...
-
I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?
Can you see them in Disk Utility?
If so, can you select and Mount them?
If not, disconnect them, reset the iMac's SMC and then reconnect them.
Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted. -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?
1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD -
I just purchased a new iMac and my Hard Drive is not showing on my desktop.
I just purchased a new iMac and my Hard Drive is not showing on my desktop. It doesn't show up on a finder window either.
No. It's what I've named my boot drive.
New Finder windows can be set to open any selected volume or folder of your choice.
Maybe you are looking for
-
Can I set Mail default text color
Is there a way to set default text color for sent messages? These settings don't seem to have any effect:
-
Trouble with passing values into table !
Well my problem seems to be very small but have tried a lot of books and e-books to get a possible solution, but all in vain. The problem is I have a table, lets say 'tab', which has a varchar2 column, lets say 'col'. I want to be able to make an ins
-
I am using Personal Oracle 8i, and i seem to be having some problems. When I launch Oracle DBA Studio (or any other Oracle application which accessed the DB), I get the error "ORA-12535: TNS:operation timed out". I know that the services are started
-
Hi All, When I post dep. with AFAB for the period 3 the error follows: LAST POSTING RUN TERMINATED(Restart in period 2011 002) When I restart post dep in AFAB Background job is in finished status with no list, but it say's "document posted in restart
-
Hi All, I have just completed an iMovie 5.02 movie and want to export it into Quicktime . It's an MPEG-4 format and the iMovie Project file is about 1.4GB. I choose Share > Quicktime > Full Quality, select a file name and hit OK. It runs for about 60