My ipad 2 turns black and shows the rotating symbol for startup but nothing happens what can i do?
my ipadscreen turned black and just shows a rotating symbol for startup but nothing happens. What can i do?
iPad: Not responding or does not turn on
If nothing there helped, time for a restore.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Similar Messages
-
my iphone 4 suddenly turns black and unresponsive. I tried to reset but nothing happened. Help please
See Here for
Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only
Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
Any thoughts or help would be appreciated! -
I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.
I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed. -
Trying to download itunes on new computer and it says thank you for downloading but nothing happened
trying to download itunes on new computer and it says thank you for downloading but nothing happened
Clear your broswer's cache and then try again.
-
When I touch my apps the screen blinks but nothing happens what can I do?
when i touch an app to start it, the screen blinks but nothing happens. I did refresh that didn't help. What next?
- Try resetting the iPod. Nothing will be lost..
- downoad/install a new app.
- iOS: Troubleshooting applications purchased from the App Store -
My iphone 4s got wet and shows the apple logo when charging but nothing else?
When i hold the home button in and its on charge the apple logo will appear for 5 seconds then go but nothing else, with out being connected for charge nothing happens.
It's water damaged. It is not in warranty. The warranty was voided when it got wet.
The replacement phone will inherit the balance of the original warranty or 90 days, whichever is longer. -
My iPad went black and shows a picture of the power source pointing to a iTunes emblem
When I went to install an update, my iPad went black and shows a picture of a power source next to an iTune emblem. I powered it off but when I power it back on, it shows the same thing.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
iPad went black and has the apple logo with a little wheel at the bottom. Tried turning on and off doesn't work.
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully
Check out this Apple article -> iOS: Unable to update or restore
Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone? -
My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?
If the Reset didn't work, you'll need to do a Restore.
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad. -
my i pad turned black and have the interface of shuting down lasting for 10 hours, have a problem even in connecting to computer
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
Its been like this for awhile and I can not fix itTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
So my ipod touch won't turn on and I've tried to reset it but nothing i do seems to work. Also, I can't even get the Apple Logo to appear. It really won't start. what can i do?
try pressing and holding the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears.. this worked for me when my ipod touch didnt turn on or show the apple symbol.. hope this helps
-
my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts
Maybe you are looking for
-
Images from KM are not getting displayed in EP
Hi All, I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing. Location of the Images that I received from EP is mentioned below. htt
-
My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?
-
I have some forms that can be filled in and saved using adobe PDF reader. When I open them on my playbook, I can't type into any of the feilds. Is there anyway around this? Thanks
-
How to add custom action in info view
<p>We want to add link to each report which redirects user to our page. </p><p> </p><p>So far we have found: </p><p>On InfoView page, there is listing of info objects(reports, hyperlink, programs) - listing.aspx.<br /></p><p>Actions for each object
-
Hi there - I'm sorry if this is a dumb question, but I didn't know where else to go with it. Today is my first day working in Dreamweaver, I started doing one of the tutorials becuase it looked basic, and I actually understood the hows pretty well, b