My ipad 3 sounds are not working please help
Hi
I have an ipad 3G wifi IOS version 5.1.1(9B206) modem firmware 1.0.11..once i plug my headset sounds work perfect but without the headset sounds doesnt work..not in you tube not in music nothing..but when i increase the ringing volume in settings -> general -> sounds it perfectly woks but when i increase with the volume button on the right side top it doesnt increse unless the headset is pluged in..also without the headset no sounds on apps, keyboard and when unlocking..i did trying restting the ipad ,tried double clicking the home button and went to multitask and swiped to the right and checked whether the mute is enabled and its a no and its a NO..
Please Help
http://www.youtube.com/watch?v=cJg7qp_TzqM
watch this works like magic
Similar Messages
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
My headphones speakers and microphone are not working please help
hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks
Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
some buttons on the right hand of my ipod touch screen are not working? could somebody help me i have reset restored and everything has this happened to anyone else?
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Hi i just retired to iPhone 6 but my apps are not working please help
apps are not working on my new iPhone 6
What is not working? There are many apps out there. What have you tried? What happens when you launch an app?
-
New Apple ipad air display not working,please help?
Please can anyone offer help? Week old ipad air display has stopped working after app froze and son double tapped home button to shut app down.Thank you in advance for any offers.
If you are editing/testing in the Flash editor, the html end of things is nothing to be concerned about at this stage, and will likely take care of itself when it comes time.
So you run the file in Flash and do not get any error messages? Then place a trace command inside the button's event handler function to see if the button is communicating with it....
function b_1ClickHandler(e:MouseEvent)
trace("button works");
navigateToURL(new URLRequest("http://www.MYURL.com/.html"),"_self");
Also, I'm just noticing you don't have an actual file named in the url, so in case the "not working" is that you can't get the desired page to show, that may be the cause. Normally I would suggest testing url links online rather than in Flash because it's iffy to try to get the web involved with the editor at times. -
Everytime I open firefox, all words or letters below the toolbar half inch to 3 inch from right to left are not clickable(not working). but they are working or clickable on google crhome or internet explorer. please help to resolve this problem. thanks!
The '''''Yahoo! Toolbar''''' and the '''''Babylon''''' extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
Sounds are not working on iPhone 3g
I made an application that play some sound files. Everything is working correctly on simulator and iPod touch but sounds are not working on iPhone 3G.
Please help...Hi youngp69,
If you are having issues with an app you have downloaded from the iTunes Store on your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Regards,
- Brenden -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
My ipad sound is not working except when my head phone is connected
Plz help my ipad sound is not working but is when I put headphone.the sound comes when I activate Siri but otherwise no sound comes from ipad. the volume button is not workin but it used to. The slider thing to increase volume in the task bar is halfly gone means that dot is not there to increase volume
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J
Maybe you are looking for
-
Remove property from a OOTB component
Hello, I want to remove an OOTB property from a component - Can I do it using dyn admin or by creating a new properties file ?
-
Can't find Scaling and Mapping Express VI
I have just upgraded from 6 to 7.1 and am going through the "Getting Started" booklet. On page 1-9, it says to get the Scaling and Mapping Express VI from Arithmetic and COmparison. I don't see it there. I used Search and couldn't find it either. Am
-
All My iMac and its Mail send MS Word documents good as gold most of the time, but sometimes the recipient can't open it. It seems to be one of the Mac's little ways. Normally, the recipients could if they took the option of Opening Using: Word, but
-
Is it possible in Numbers to sort rows based on the row fill color? There are only 2 colors the rows have as background (fill), and it would save time to sort based on the highlighted row. Any ideas? Thank you-
-
Photoshop CS3 Extended Crash on Startup
It crashes before it even finished loading. I haven't even gotten the program to work once. Yes, I uninstalled and reinstalled. Still no luck. By the way I have no printer, and I'm using Vista 64. This is what it says. Problem signature: Problem Even